Benefits
- Improves product functionality and penetration
- Does not affect pH, specific gravity, VOC, flammability, or corrosiveness
- Blends with existing surfactant chemistry
- Nanoparticles will not separate out from solution
- Increases wetting and spreading on and below the surface
- pH stable; effective range from pH 5–7
- Reduces cleaning time and increases cleaning power
- Increases shelf-life
- Eco-friendly, non-corrosive, and non-flammable
Directions
- Slowly pour Nano Additive to the formulated, finished product
- Mix gently to minimize foaming. Mixing and agitating may increase foaming
- Solution may become cloudy (Cloud Point) in the beginning then clear up slowly
Note: Do not mix with straight raw materials. Designed to mix with formulated, finish product only. For glass cleaning products, use 2–4 fl oz per 1 gallon of finish product.
CAUTION
Keep product out of eyes. Do not swallow this product. Recommend wearing safety glasses or goggles when eye contact is possible. The use of rubber, neoprene, nitrile or other resistant gloves may be necessary under conditions of prolonged use. Remove contaminated clothing and DO NOT re-wear until thoroughly cleaned. After handling, wash hands thoroughly with soap and water.
KEEP OUT OF REACH OF CHILDREN.
DO NOT TAKE INTERNALLY.
FIRST AID
Eyes: Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical attention if irritation persists.
Skin: Flush affected area with plenty of water. Consult a physician if irritation develops.
Ingestion: If this product is swallowed do not induce vomiting. If vomiting occurs, keep head below hips to prevent aspiration (breathing) of liquid into the lungs. Get emergency medical attention immediately.
PRODUCT DESCRIPTION
Nano Gun Grease-GTI is engineered with highly-complex nanochemistry for deeper penetration and provides extremely long-lasting protection. Nano Gun Grease-GTI delivers exceptional performance by reducing wear and fatigue on key firearm metal components. Its lighter viscosity allows for easy migration into hard-to-reach weapon parts, making it ideal for dispensing where a full disassembly is neither desirable nor practical, such as trigger assemblies. Also, it is excellent for general quick-lubrication replenishment on all stationary and moving internal parts to perform at their best. Gun Grease-GTI is formulated with a non-hydrocarbon-based chemistry and an all-synthetic, nanocomposite, non-toxic material with the lowest-known friction coefficient, maintaining lubricity in the most adverse conditions, delivering long-lasting optimum performance where most liquid lubricants fail.
Performance characteristics
Since Nano Gun Grease-GTI delivers exceptional performance in adverse conditions (sand, dirt, high-humidity, saltwater and extreme-temperature environments). It has been the number one choice of the U.S. Special Forces, leading law enforcement’s handheld and crew-served weaponry, and sport shooters worldwide. It provides the ultimate lubrication protection for all wear parts and the bore; it eliminates galling, short-stroking, improves bore accuracy, increases muzzle velocity, and is the best choice for extremely-pressured and heavy-load-bearing conditions. It is excellent for fire-ready long-term weapon storage and maintenance.
Nano Gun Grease-GTI is more than just gun grease, it is the next generation of nanotechnology lubrication. It is applied the same way as traditional gun grease. It works superbly on metal-to-metal slides where grease-like viscosity products are necessary for weapons having prolonged surface-to-surface contact, such as the 1911 Rails M1 carbine bolts and M16 bolts/carriers.
Unique Features
Designed to replace all hydrocarbon-based gun grease, CLP’s, and dry lubes, it will not dry, sag, evaporate, separate, and/or cause gumming, bad odor, VOCs and excessive carbon buildup like all other traditional gun greases and lubricants. Nano Gun Grease-GTI provides the highest possible protection against wear, humidity, and moisture, including saltwater. It clings to most all internal mechanisms and leaves long-lasting protection that repels dust and dirt and will not evaporate—excellent for “ready-to-fire” long-term storage. It outperforms all traditional hydrocarbon-based gun grease. It provides optimum friction reduction (lubricity) when wet or dry with a functional temperature range between -65°F– 550°F. It keeps all internal moving and non-moving parts from overheating and prevents and minimizes metal fatigue and stress caused by contraction and expansion of gun metals due to extreme temperature fluctuations.
Product Description
Nano Gun Lube-X3i is engineered with highly-complex nanochemistry for deeper penetration and provides long-lasting protection. Nano Gun Lube-X3i delivers exceptional performance by reducing wear and fatigue on key firearm metal components. Its lighter viscosity allows for easy migration into hard-to-reach weapon parts, making it ideal for dispensing where a full disassembly is neither desirable nor practical, such as trigger assemblies. Also, it is excellent for general quick-lubrication replenishment on all stationary and moving parts to perform at their best. This gun lube is formulated with a non-hydrocarbon-based chemistry and an all-synthetic nanocomposite, non-toxic material that delivers long-lasting optimum performance. It outperforms all traditional gun oils.
Performance characteristics
Since Nano Gun Lube-X3i delivers exceptional performance in adverse conditions (sand, dirt, high-humidity, saltwater, and extreme temperature environments).It has been the number one choice of the U.S. Special Forces, leading law enforcement, and sport shooters worldwide. It provides ultimate lubrication protection for all wear parts and the bore—eliminating galling and short-stroking, improving bore accuracy, and increasing muzzle velocity. Nano Gun Lube-X3i is the best choice in extreme-pressure and heavy-load-bearing conditions. It is excellent for fire-ready long-term weapon storage and maintenance. Nano Gun Lube-X3i is formulated with unique all-synthetic, non-toxic, nanocomposite particles having the lowest-known friction coefficient.
Nano Gun Lube-X3i is more than just gun lube, it is the next generation of nanotechnology lubrication. It is applied the same way as traditional gun lube.
Unique Features
Designed to replace all hydrocarbon-based gun oils, CLP’s, and dry lubes; it will not dry, evaporate, separate, and/or cause gumming, bad odor, or excessive carbon buildup like all other traditional gun oil and lubricants. Nano Gun Lube-X3i provides the highest possible protection against wear, humidity, and moisture, including saltwater. It leaves a long-lasting protection that repels dust and dirt and will not evaporate—excellent for “ready-to-fire” long-term storage. It provides optimum friction reduction (lubricity) when wet or dry. The functional temperature range is between -65°F–550°F. Gun Lube-X3i keeps all internal moving and non-moving parts from overheating and prevents and minimizes metal fatigue and stress caused by contraction and expansion of gun metal due to extreme temperature fluctuations.
Nano Overcoat 1100 is an invisible barrier designed for painted masonry surfaces, fiberglass and plastic panels, and painted metal surfaces. NOT RECOMMENDED FOR WOOD SURFACES.
Advantages
- Deep penetrating.
- Forms a non-stick slick barrier.
- Fills in micro-pores on the surface.
- Repels dirt, dust, moisture, soap scum, and stains.
- Makes future surface cleaning easier and effortless.
- Protects surface from discoloration and staining.
Application
Step 1
Before applying the Nano Overcoat 1100, use EST Heavy Duty Cleaner to clean the surface. This will remove any unwanted particles and stains and will open the pores to allow the product to penetrate and adhere to the surface.
Note: Please consult the information on the EST Heavy Duty Cleaner container before using it.
Step 2
Apply the Nano Overcoat 1100 with an airless sprayer; the surface should be clean and dry prior to application. If the surface is very porous, apply 2-3 coats if necessary until the surface becomes saturated with the Nano Overcoat 1100. Allow 2-3 hours for the coating to penetrate and cure.
Coverage/Dilution
Use 5 gallons of concentrated Nano Overcoat 100 mixed with 45 gallons of water to make 50 gallons of ready to use product.
Approximate Coverage Rate: 1000-1200 square feet per gallon based on porosity of surface.
Recommended Application
Based on the current condition of the surface, product can be applied once a week or once every 2 weeks.
Nano Prime Prep Coat is designed for all types of boat bottoms and sides (fiberglass and metal), ATV bodies, jet skies, and water skies. (NOT RECOMMENDED FOR WOOD BOATS.) Please contact your local EST, Inc. representative for more information about treating wood boats.)
Advantages
- Deep penetrating.
- Forms a permanent barrier.
- Fills in all pores on a surface.
Applications
Step 1:
Before applying the Prime Prep Coat product, use Heavy Duty Fiberglass Cleaner to clean the surface. This will remove barnacles and stains, and open the pores to allow Prime Prep Coat to penetrate the surface and adhere to the surface.
Note: Please consult the information on the Heavy Duty fiberglass Cleaner container before using it.
Step 2:
Apply the Prime Prep Coat with a brush, roller, or spray; the surface should be clean and dry prior to application. If the surface is very porous, apply as many coats as necessary until the surface become saturated with the Prime Prep Coat; flood the surface with the product when applying. Allow 8–10 hours for the coating to penetrate and cure. If the surface remains wet after 10 hours, wipe off the excess with a dry towel and buff gently with a polishing pad until the surface becomes dry and smooth.
Coverage 500–900 sq ft per gallon, depending of the underlying paint and its porousity. Test a small area to determine approximate coverage.
Step 3:
Apply Nano Tech Polish for Boats with a spray; wipe off with a cotton towel. Apply 3 coats, if needed. Polish the surface until it becomes slick and shiny.
Nano Tech Golf Ball Polish is made with latest 2nd generation nanotechnology. It does not contain any hydrocarbons, acids, phosphates, or animal fat. It is in fully compliant with California VOC rules and regulations. This product listed as a “green” product, it does not contain any harmful chemicals.
ADVANTAGES
- Improves distance (up to 40-50 yards).
- Reduces friction (maintains direction in a 40 mph wind)
- Allow Improvements in scoring.
- Does not change the dimension, weight, or color of the golf ball.
- Can be applied to the shaft of the club as well.
- Ball stays clean longer; the surface becomes stain and moisture resistant.
- Ozone-safe and meets all VOC (Volatile Organic Compound) requirements.
APPLICATION
Spray directly onto the ball surface and then wipe the ball off with a clean cloth or tissue. For best results, initially apply two coats. Wipe off between each coat.
Safety
This product is odorless, Non-Hazardous, V.O.C. compliant, Non-Flammable, Non-Corrosive. It is safe for plants, living vegetation, paint, metal, wood, plastic, fiberglass, fabric and most hard surfaces. will not combust or ignite.
Working temperature range from -60°F to 800°F. Will not burn off or come off.
PRODUCT DESCRIPTION
This is a microscopic, invisible, protective coating made with Nano-fusion technology which preserves natural beauty, retards fine scratches, repels dirt and water, and makes cleaning quick and easy. It removes ordinary soil, dust particles, fingerprints, and static from doorknobs. For autos, it reduces wind drag (friction) and improves gas mileage and repels snow and ice from windshields. Nano Tech Polish can be used on vinyl, plastic, fiberglass, rubber, kitchen counter tops, and many manmade surfaces. This product is environmentally friendly and designed to use for most interior and exterior hard surfaces.
FEATURES/BENEFITS
Makes surfaces slick and smooth; nothing can stick to it. Removes and prevents static, improves fuel mileage on all autos, airplanes, boats and buses by reducing friction and repels dirt water, dust, snow and ice. Reduces and repairs minor scratches. Does not build-up like an ordinary wax and does not increase weight or change dimension of any solid surfaces.
MARKETS
Camera Lenses
Cell Phone screens
Computer Monitors
Construction Equipment
Digital Instrument
Digital Media Screens
Electronics
Golf Balls
Hunting Equipment
Hunting Scopes
Housing
Industrial
Institutions
Janitorial
Jewelers
LCD TV Monitor
LED TV Monitors
Lighting
Liquid Crystal Monitors
Medical/MRI/X-Ray Equipment
Micro Scopes
Mirrors
Museums
Music Organs
Polish Brass and Copper
Restaurants
Schools
Shower Glass Doors
Small Device Screens
Snow Removal Equipment
Sporting Goods
Hundreds of Specialty Markets
TYPICAL APPLICATIONS
Water Sports Equipment
Snow Sports Equipment
Metal surfaces like, copper, and brass
Polished stone surfaces
Camera lenses and polycarbonate lenses
Digital TV screens Including LCD, LED and liquid crystal monitors
Formula can be tailored to its specific use.
nano Tech Polish 2nd Gen (cont.)
PHYSICAL PROPERTIES
| State | Liquid | Odor | Slight Sweet Aromatic | Specific Gravity | 1.0 to 1.05 |
| Solids (by weight) |
NA | Boiling Range | 180°F to 240°F | Solubility in Water | 99% |
| ph Range | 6.8 to 7.4 | Vapor Density | same as water | Viscosity | Same as water |
| Appearance | Milky liquid | Flash Point | NA | VOC Content | Less than 14 gram/liter |
| Nano Drivers, Composition | Metallic zinc – 75 nm, Titanium – 70 nm, and Magnesium – 70 nm | ||||
| Theoretical Coverage | May verve upon the surface Density and Porosity | ||||
| First coat coverage | From 1000/sq ft/gal to 1500/sq ft/gal | ||||
| Second coat coverage | From 1500/sq ft/gal to 2000/sq ft/gal | ||||
PROCESSING INFORMATION AND FUNCTIONAL PROPERTIES
| Operating Temperature Range | 60°F to 500°F |
| Application Temperature | 40°F to 90°F |
| Dry film thickness | Not measurable in Nano Meter Scale |
| Dilution Ration | Not Recommended, Not Required |
RESISTANCES AND REPELLENCY
| Water | Pass | Salt | Pass |
| Ice | Pass | Chloride Screen | Pass |
| Snow | Pass | Dust | Pass |
| Frost | Pass | Dirt | Pass |
| Finger Prints | Pass | Mud | Pass |
| Brake Dust | Pass | Wind Drag | Pass |
| Static | Pass | UV Rays | Pass |
| Minor Scratches | Pass | Friction | Pass |
| Airborne Particles | Pass | Smoke | Pass |
| Smog | Pass | Brake Dust | Pass |
| Anti-Static | Pass | Fog | Pass |
SUGGESTED APPLICATION METHODS
Use full strength; spray over surface and wipe off dry with clean, dry cotton cloth or for better result use microfiber cloth. For autos, apply two coats then use slow speed buffer/polisher.
Apply two coats the very first time for best results. Can be sprayed on a wet surface then wiped off dry. Apply as often as needed.
SUGGESTED PRETREATMENT
Heavy deposits of grease and grime should be removed before applying. All autos should be clean and dry before applying this product.
ADDITIONAL INFORMATION
Do not use this product on floors. Floor may become very slippery and dangerous to walk on. If over spray occurs on the floor, use floor cleaner or strong detergent to clean floor.
STORAGE
Store between 40 °F and 90 °F and away from direct sun light. Keep container closed when not in use.
SHELF LIFE
Stored at room temperature, shelf life is up to five years. If product is stored for long time lightly agitate or shake well before use.
Safety
This product is odorless, Non-Hazardous, V.O.C. compliant, Non-Flammable, Non-Corrosive. It is safe for plants, living vegetation, paint, metal, wood, plastic, fiberglass, fabric and most hard surfaces. will not combust or ignite.
Working temperature range from -60°F to 800°F. Will not burn off or come off.
LIMITED WARRANTY
EST Inc. will not be responsible for any injury, loss, or damage if product is used in any manner not in compliance with label directions or if precautions are not observed. EST Inc. has no control over the storage, handling or use of this product, thus the guarantee is limited to the purchase price of the defective material only.
TECHNICAL SUPPORT
Contact EST Inc. for further details. Independent lab test data are available upon request.
PACKAGING
Nano Tech Polish is available in quart and gallon bottles, 5 gal, 15 gal, 20 gal, 55 gal, drums, and 275 gal plastic totes. Custom packaging is available upon request.
Designed for Fiberglass, Metal and Aluminum Boat Surfaces.
Nano Tech Polish is an invisible, protective, nanoscopic coating made with Nano Technology, which preserves natural beauty, retards fine scratches, repels dirt and water, and makes future cleaning quick and easy. Specifically designed to apply over the existing boat bottom paint.
ADVANTAGES
Nano Tech Polish reduces friction, repels dirt, water, and dust, snow and ice, and makes surfaces very slick and smooth; nothing will stick to it.
- Repels hull scum and water stains.
- Reduces organic matter adhesion from the bottom of the boat surface.
- Repels water and lowers friction.
- Removes and prevents static, and improves fuel mileage on all boats.
- Reduces and repairs minor scratches, and it does not build-up like ordinary wax.
- Nano Tech Polish does not increase weight or change the dimension(s) of any solid surfaces.
- Harmless to aquatic and marine life.
APPLICATION
Heavy deposits of grease and grime should be removed (with EST Inc. HD Nano Boat Hull Cleaner) before applying. All new and used boats should be clean and dry before applying this product.
For older boats, use Nano Primer before applying Nano Tech Polish for Boat Bottoms.
Spray and Wipe Off: Use full strength; spray over the surface and wipe off dry with a clean, dry microfiber cloth. Turn cloth frequently, and change microfiber cloth once it becomes wet.
To maximize the effects, apply two (2) coats and use a slow speed buffer/polisher to finish the surface.
Electrostatic Application: Apply over entire surface with Electrostatic gun, wipe off any excess wet residue with microfiber cloth. Wait 30 minutes to an hour, apply second coat with electrostatic gun and wipe off entire surface with a clean and dry microfiber cloth.
After two applications if any haze, residue, or uneven patches remains on the surface, spray and mist those areas again and wipe off excess wetness with a clean and dry microfiber cloth.
Finally use a slow speed buffer/polisher to finish the surface.
Reapplication: Reapply Nano Tech Polish after each cleaning of the boat surface.
Coverage: Intial coverage is 1000–1200 sq ft per gallon, second coat 1500–1800 sq ft per gallon.
Do not use this product on a floor; the floor may become slippery and dangerous to walk on. If over spray occurs, reaching the floor, use a floor cleaner or a strong detergent to clean the floor.
CONDITIONS OF SALE
Always follow all label directions. The manufacturer cannot control weather conditions, methods of application nor the condition of the area at time of application. Buyer assumes all risks of use, storage or handling of this product when used in a manner inconsistent with label directions. EST Inc. will not be responsible for any injury, loss, or damage if product is used or stored in any manner not in compliance with label/tech sheet directions or if precautions are not observed.
STORAGE AND HANDLING
Note: Follow directions carefully. Always consult your dealer or supplier for timing, methods and to customize application. Do not mix with this product with any household cleaning products.
Wear rubber gloves and eye protection. Avoid contact with open wounds or sores, harmful if swallowed, avoid any direct contact with the skin and eyes; may cause irritation.
Store between 40°F–90°F (room temperature) and away from direct sun light. Keep container closed when not in use. Product can be stored up to two years. If product is stored for a long time, lightly agitate or shake well before use.
FIRST AID
EYES: Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical attention if irritation persists.
SKIN: Wash thoroughly any exposed effected body parts with soap and water. Consult a physician if irritation develops.
INGESTION: If this product is swallowed do not induce vomiting. If vomiting occurs, keep head below hips to prevent aspiration (breathing) of liquid into the lungs. Get emergency medical attention immediately.
This uniquely formulated product is designed with nano-polymeric chemistry for all automotive glass, solar panel glass, household and industrial window glass, aircraft windshield, plexi glass, polycarbonate glass and many other interior/exterior glass surfaces. This treatment forms a bond with the glass surface, fills in micro and nanovoids, and helps improve clarity, visibility and driving response by a full second in wet wintry and rainy conditions. That is about four car lengths extra stopping distance.
This invisible nano water repellent treatment for windshield helps make ice and snow easier to remove in cold icy and snowy winter weather and provides a clear view in extreme rainy weather.
BENEFITS
- Improves all weather visibility and safety.
- Increases driving comfort.
- Facilitates easy removal of ice, snow, frost, salt, mud, and bugs.
- Increase the effectiveness of wiper blades to remove water, snow, and ice quickly.
- Protect glass form UV and weathering effects.
- Reduces frictions and repel water, dust dirt and bugs.
- Increase the life of glass surfaces.
- Increase the life of wiper blades.
Applications
This invisible nano treatment is generally applied by spraying directly on to the windshield surface and by wiping off with microfiber or cotton cloth. Initially apply two coats for proper treatment and adhesion to the windshield surface. After the second treatment, windshield surface can be buffed with dry polishing pad. By buffing, nano polymer creates a stronger more permanent bond with the windshield surface.
Depending on the weather the water repellent nano treatment can last, as long as one year, but on average it should be reapplied every 6 months for best results. Treatment should be re-applied as soon as visibility starts to become impaired in wet weather.
Apply two coats of Nano Tech Polish for Glass during initial application, spray and wipe off with a clean microfiber cloth.
Note: This nano treatment product can be sold to auto dealers, car wash and auto detailing facilities, quick oil change franchises, or any auto repair facilities. These companies can install this treatment for their customers for a small fee. This product can be sold at most auto parts stores, gas stations, auto dealers, windshield repair companies, or wherever auto supplies are sold.
This product can be added to the existing windshield washer fluid reservoir mixed in with windshield washer fluid as a nano treatment for the windshield. This will replace the treatment every time as the washer fluid is sprayed on the windshield.
Nano Tech Polish for Glass can be applied as described above on front and rear windshield before adding Nano Tech Polish for Glass to washer reservoirs.
STORAGE
Store between 40 °F and 90 °F and away from direct sun light. Keep container closed when not in use.
SHELF LIFE
Stored at room temperature, shelf life is up to five years. If product is stored for long time lightly agitate or shake well before use.
Safety
This product is odorless, Non-Hazardous, V.O.C. compliant, Non-Flammable, Non-Corrosive. It is safe for plants, living vegetation, paint, metal, wood, plastic, fiberglass, fabric and most hard surfaces. will not combust or ignite.
Working temperature range from -60°F to 800°F. Will not burn off or come off.
LIMITED WARRANTY
EST Inc. will not be responsible for any injury, loss, or damage if product is used in any manner not in compliance with label directions or if precautions are not observed. EST Inc. has no control over the storage, handling or use of this product, thus the guarantee is limited to the purchase price of the defective material only.
TECHNICAL SUPPORT
Contact EST Inc. for further details. Independent lab test data are available upon request.
PACKAGING
Nano Tech Polish is available in quart and gallon bottles, 5 gal, 15 gal, 20 gal, 55 gal, drums, and 275 gal plastic totes. Custom packaging is available upon request.
This uniquely formulated product is designed with nano-polymeric chemistry for all automotive glass, solar panel glass, household and industrial window glass, aircraft windshield, plexi glass, polycarbonate glass and many other interior/exterior glass surfaces. This treatment forms a bond with the glass surface, fills in micro and nanovoids, and helps improve clarity, visibility and driving response by a full second in wet wintry and rainy conditions. That’s about four car lengths extra stopping distance.
This invisible nano water repellent treatment for windshield helps make ice and snow easier to remove in cold icy and snowy winter weather and provides a clear view in extreme rainy weather.
BENEFITS
- Improves all weather visibility and safety.
- Increases driving comfort.
- Facilitates easy removal of ice, snow, frost, salt, mud and bugs.
- Increase the effectiveness of wiper blades to remove water, snow and ice quickly.
- Protect glass form UV and weathering effects.
- Reduces frictions and repel water, dust dirt and bugs.
- Increase the life of glass surfaces.
- Increase the life of wiper blades.
Applications
This invisible nano treatment is generally applied by spraying directly on to the windshield surface and by wiping off with micro fiber or cotton cloth. Initially apply two coats for proper treatment and adhesion to the windshield surface. After the second treatment, windshield surface can be buffed with dry polishing pad. By buffing, nano polymer creates a stronger more permanent bond with the windshield surface.
Depending on the weather the water repellent nano treatment can last, as long as a year, but on average it should be reapplied every 6 months for best results. Treatment should be re-applied as soon as visibility starts to become impaired in wet weather.
Note: This nano treatment product can be sold to auto dealers, car wash and auto detailing facilities, quick oil change franchises, or any auto repair facilities. These companies can install this treatment for their customers for a small fee. This product can be sold at most auto parts stores, gas stations, auto dealers, windshield repair companies, or wherever auto supplies are sold.
This product can be added to the existing windshield washer fluid reservoir mixed in with windshield washer fluid as a nano treatment for the windshield. This will replace the treatment every time as the washer fluid is sprayed on the windshield.
STORAGE
Store between 40 °F and 90 °F and away from direct sun light. Keep container closed when not in use.
SHELF LIFE
Stored at room temperature, shelf life is up to five years. If product is stored for long time lightly agitate or shake well before use.
SAFETY
This product is odorless, Non-Hazardous, V.O.C. compliant, Non-Flammable, Non-Corrosive. It is safe for plants, living vegetation, paint, metal, wood, plastic, fiberglass, fabric and most hard surfaces. will not combust or ignite.
Working temperature range from -60°F to 800°F. Will not burn off or come off.
LIMITED WARRANTY
EST Inc. will not be responsible for any injury, loss, or damage if product is used in any manner not in compliance with label directions or if precautions are not observed. EST Inc. has no control over the storage, handling or use of this product, thus the guarantee is limited to the purchase price of the defective material only.
TECHNICAL SUPPORT
Contact EST Inc. for further details. Independent lab test data are available upon request.
PACKAGING
Nano Tech Polish is available in quart and gallon bottles, 5 gal, 15 gal, 20 gal, 55 gal, drums, and 275 gal plastic totes. Custom packaging is available upon request.
This uniquely formulated product is designed with nano-polymeric chemistry for all types of solar panel glass and is also great for use on automotive glass, household and industrial window glass, and aircraft windshields. This treatment forms a bond with the glass surface, fills in micro and nanovoids, and helps improve clarity, visibility, and driving response by a full second in wet, wintery, and rainy conditions.
Nano Tech Polish for Solar Panels provides increased resistance to dirt, dust, and other weather pollutions. Natural rain or a light water spray will keep the glass clean by washing away pollutants from the surface of the solar panel. This helps minimize abrasion by protecting the glass surface from minor scratches caused by high wind, sand, and dirt. The invisible nano water repellent treatment also contributes to making ice and snow easier to remove from the solar panel or glass surface in cold, icy, and snowy winter conditions.
BENEFITS
- Improves charging efficiency and protect glass surface from overheating.
- Decreases and shortens charging time.
- Respells ice, snow, frost, dust, dirt, mud, and bugs.
- Makes glass surfaces self-cleaning.
- Protects glass from UV and weathering effects.
- Reduces static and friction and minimizes surface scratches.
- Increases the life of glass surfaces.
- Safe to use on Low E Glass – see description below.*
APPLICATIONS
Nano Tech Polish is generally applied by spraying directly onto the solar panel or glass surface and by wiping off with micro fiber or cotton cloth. Initially apply two coats for proper treatment and adhesion to the glass surface. After second treatment, surface can be buffed with dry polishing pad. By buffing, the nanopolymer creates a stronger more permanent bond with the solar panel surface. For larger application areas use of a specialized robot can assist in application.
Depending on the weather the nano polish treatment on the solar panel can last as long as a year, but on average it should be reapplied every 12 months for best results.
LOW E GLASS
Low-E stands for Low Emissivity. This glass is an energy efficient way to control the heat being allowed in and out of a home or environment. Low-E Glass is glazed with an ultra-thin metallic coating. The manufacturing process applies this with either a hard coat or soft coat process. Soft coated Low-E Glass is more delicate and easily damaged and therefore used in insulated windows where it can be in between two other pieces of glass. Hard coated versions are more durable and can be used in single paned windows. The coating used to make Low-E Glass works to transmit short wave energy and reflects long wave energy to keep heat in the desired location, while still allowing additional light to come in.
LOW E GLASS APPLICATION METHOD
Use Nano Tech Polish specially developed for Low E Glass and Solar Panels. Spray on the glass surface and wipe off gently with a micro fiber cloth. Apply 2 coats initially. This long-lasting coating will stay on the glass for a minimum of 1 year or more. It will make future cleaning very easy. Rain will also keep the coated glass surface clean and fog free. This nano coating will reflect long wave energy to keep heat in the desired location and to protect and extend the life of the metallic finish on the glass surface; this extends the warranty of glass and will allow for additional light to come in.
TECHNICAL DATA
| State | Liquid |
| Solids (by weight) | NA |
| PH Range | 6.8 to 7.4 |
| Appearance | Milky liquid |
| Odor | Slight Sweet to None |
| Boiling Range | 220 °F to 240 °F |
| Dry Film Temperature range | 60 F° to 700 °F |
| Vapor Density | same as water |
| Flash Point | NA |
| Specific Gravity | 1.0 to 1.05 |
| Solubility in Water | 99% |
| Viscosity | Same as water |
| VOC Content | Less than 2/grams/liter |
| Nano Drivers Consists of | Metallic zinc-75nm, Titanium-70nm, and Magnesium – 70nm |
| Theoretical Coverage | May vary upon the surface Density and Porosity |
| First coat coverage | 1000/sq. ft./gal to 1500/sq. ft./gal |
| Second coat coverage | 1500/sq. ft./gal to 2000/sq. ft./gal |
PROCESSING INFORMATION AND FUNCTIONING PROPERTIES
| Operating Temperature Range | -60 °F to 700 °F |
| Application Temperature | 40 °F to 90 °F |
| Dry film thickness, Nano Meter Scale | Not measurable. |
| Dilution Ratio | Not Recommended /Not Required |
Designed to use as spray and wipe off.
RESISTANCE AND REPELLENCY FACTOR
| Water | Pass | Salt | Pass |
| Ice | Pass | Chloride Screen | Pass |
| Snow | Pass | Dust | Pass |
| Frost | Pass | Dirt | Pass |
| Finger Prints | Pass | Mud | Pass |
| Brake Dust | Pass | Wind Drag | Pass |
| Static | Pass | UV Rays | Pass |
| Minor Scratches | Pass | Frictions | Pass |
| Airborne Particles | Pass | Smoke | Pass |
| Smog | Pass | Brake dust | Pass |
| Anti-Static | Pass | Fog | Pass |
STORAGE
Store between 40 °F and 90 °F and away from direct sun light. Keep container closed when not in use.
SHELF LIFE
Stored at room temperature, shelf life is up to five years. If product is stored for long time lightly agitate or shake well before use.
Safety
This product is odorless, Non-Hazardous, V.O.C. compliant, Non-Flammable, Non-Corrosive. It is safe for plants, living vegetation, paint, metal, wood, plastic, fiberglass, fabric and most hard surfaces. will not combust or ignite.
Working temperature range from -60°F to 800°F. Will not burn off or come off.
LIMITED WARRANTY
EST Inc. will not be responsible for any injury, loss, or damage if product is used in any manner not in compliance with label directions or if precautions are not observed. EST Inc. has no control over the storage, handling or use of this product, thus the guarantee is limited to the purchase price of the defective material only.
TECHNICAL SUPPORT
Contact EST Inc. for further details. Independent lab test data are available upon request.
PACKAGING
Nano Tech Polish is available in quart and gallon bottles, 5 gal, 15 gal, 20 gal, 55 gal, drums, and 275 gal plastic totes. Custom packaging is available upon request.
PRODUCT DESCRIPTION
This is a microscopic, invisible, protective coating made with Nano-fusion technology which preserves natural beauty, retards fine scratches, repels dirt and water, and makes cleaning quick and easy. It removes ordinary soil, dust particles, fingerprints, and static from doorknobs. For autos, it reduces wind drag (friction) and improves gas mileage and repels snow and ice from windshields. Nano Tech Polish can be used on vinyl, plastic, fiberglass, rubber, kitchen counter tops, and many manmade surfaces. This product is environmentally friendly and designed to use for most interior and exterior hard surfaces.
FEATURES/BENEFITS
Makes surfaces slick and smooth; nothing can stick to it. Removes and prevents static, improves fuel mileage on all autos, airplanes, boats and buses by reducing friction and repels dirt water, dust, snow and ice. Reduces and repairs minor scratches. Does not build-up like an ordinary wax and does not increase weight or change dimension of any solid surfaces.
SUGGESTED APPLICATION METHODS
Use full strength; spray over surface and wipe off dry with clean, dry cotton cloth or for better result use microfiber cloth. For autos, apply two coats then use slow speed buffer/polisher.
Apply two coats the very first time for best results. Can be sprayed on a wet surface then wiped off dry. Apply as often as needed.
SUGGESTED PRETREATMENT
Heavy deposits of grease and grime should be removed before applying. All autos should be clean and dry before applying this product.
TECHNICAL DATA
| State | Liquid |
| Solids (by weight) | NA |
| PH Range | 6.8 to 7.4 |
| Appearance | Milky liquid |
| Odor | Slight Sweet to None |
| Boiling Range | 220 °F to 240 °F |
| Dry Film Temperature range | -60 F° to 700 °F |
| Vapor Density | same as water |
| Flash Point | NA |
| Specific Gravity | 1.0 to 1.05 |
| Solubility in Water | 99% |
| Viscosity | Same as water |
| VOC Content | Less than 2 grams/liter |
| Nano Drivers Consists of | Metallic zinc-75nm, Titanium-70nm, and Magnesium – 70nm |
| Theoretical Coverage | May vary upon the surface Density and Porosity |
| First coat coverage | 1000/sq. ft./gal to 1500/sq. ft./gal |
| Second coat coverage | 1500/sq. ft./gal to 2000/sq. ft./gal |
PROCESSING INFORMATION AND FUNCTIONING PROPERTIES
| Operating Temperature Range | -60 °F to 700 °F |
| Application Temperature | 40 °F to 90 °F |
| Dry film thickness, Nano Meter Scale | Not measurable. |
| Dilution Ratio | Not Recommended /Not Required |
| Exterior Application | Do Not Apply in Direct Sunlight |
Designed to use as spray and wipe off.
RESISTANCE AND REPELLENCY FACTOR
| Water | Pass | Salt | Pass |
| Ice | Pass | Chloride Screen | Pass |
| Snow | Pass | Dust | Pass |
| Frost | Pass | Dirt | Pass |
| Finger Prints | Pass | Mud | Pass |
| Bacteria Screening | Pass | Wind Drag | Pass |
| Static | Pass | UV Rays | Pass |
| Minor Scratches | Pass | Frictions | Pass |
| Airborne Particles | Pass | Smoke | Pass |
| Smog | Pass | Repellency Factor | Pass |
| Anti-Static | Pass | Fog | Pass |
STORAGE
Store between 40 °F and 90 °F and away from direct sun light. Keep container closed when not in use.
SHELF LIFE
Stored at room temperature, shelf life is up to five years. If product is stored for long time lightly agitate or shake well before use.
Safety
This product is odorless, Non-Hazardous, V.O.C. compliant, Non-Flammable, Non-Corrosive. It is safe for plants, living vegetation, paint, metal, wood, plastic, fiberglass, fabric and most hard surfaces. will not combust or ignite.
Working temperature range from -60°F to 800°F. Will not burn off or come off.
LIMITED WARRANTY
EST Inc. will not be responsible for any injury, loss, or damage if product is used in any manner not in compliance with label directions or if precautions are not observed. EST Inc. has no control over the storage, handling or use of this product, thus the guarantee is limited to the purchase price of the defective material only.
CONDITIONS OF SALE
Always follow all label directions. The manufacturer cannot control weather conditions, methods of application nor the condition of the area at time of application. Buyer assumes all risks of use, storage or handling of this product when used in a manner inconsistent with label directions. EST Inc. will not be responsible for any injury, loss, or damage if product is used or stored in any manner not in compliance with label/tech sheet directions or if precautions are not observed.
STORAGE AND HANDLING
Note: Follow directions carefully. Always consult your dealer or supplier for timing, methods and to customize application, depending on contaminations.
Wear rubber gloves and eye protection. Avoid contact with open wounds or sores, harmful if swallowed, avoid any direct contact with the skin and eyes; may cause irritation.
Keep container closed when not in use. Store out of direct sunlight. Keep from Freezing. Avoid temperatures above 120 °F, or below 40 °F.
FIRST AID
EYES: Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical attention if irritation persists.
SKIN: Wash thoroughly any exposed effected body parts with soap and water. Consult a physician if irritation develops.
INGESTION: If this product is swallowed do not induce vomiting. If vomiting occurs, keep head below hips to prevent aspiration (breathing) of liquid into the lungs. Get emergency medical attention immediately.
PRODUCT DESCRIPTION
Slide Protect is a safe, ready-to-use product designed to keep non-fabric outdoor equipment beautiful by protecting against sun damage, chlorine, saltwater, and day-to-day wear and tear. Slide Protect keeps slides beautiful and makes sure equipment retains its like-new shine. With easy application and storage, this non-toxic formulation saves time. Slide Protect is formulated to prevent static build up on surfaces. It is water-based and non-flammable.
USE ON
- Water Slides
- Playground Equipment
- Deck Furniture
- Spa Exteriors
- Hot Tub Covers
- All other Non-Fabric Equipment
PREVENTS
- Color Fading
- UVA and UVB Damage
- Chalking
- Cracking and Chipping
- Harsh Weather Effects
- Sun and Storm Weathering
PROTECTS
- Outdoor Plastics
- Rubber
- Vinyl
- PVC
- Polyethylene
- Fiberglass
- Naugahyde
DIRECTIONS
Before applying make sure the surface is clean and free of dirt and debris. Wait at least two hours before public use to allow product to completely penetrate. Make sure rain isn’t expected during application time. Drying times will depend on weather conditions. Do not use on walkways, floors, or other places were slipping may be a hazard.
SLIDES (Inside Surface)
Apply product with spray bottle making sure to spread evenly across the surface with clean cloth or sponge. Allow to penetrate. Wipe off excess. Wait at least two hours before use or recoating. Two coats are recommended for slides.
OTHER SURFACES
Apply product with spray bottle making sure to spread evenly across the surface with clean cloth or sponge. Allow to penetrate. Wipe off excess.
REAPPLICATION
Heavy use areas reapply every 1–2 weeks. Occasional use areas reapply every 4–6 weeks. Reapply as needed.
Wipe off any overspray with a clean towel.
PRODUCT DESCRIPTION
Maintains Proper pH for swimming pool water
This product is used to raise the pH of swimming pool water. The pH level of the water has a direct bearing on the efficient and economical use of chlorine. Proper chlorination is maintained when the water’s pH values are registered between 7.2 –7.8 pH.
DIRECTIONS
When the pool water pH value is below 7.2 as determined by use of a pH Test Kit, add pH PLUS liquid directly into the pool over the main drain.
| pH Level | pH Plus Volume Used | Volume of Pool (gal) |
| > 6.6 | 1 gal | 10,000 |
| 6.6–7.0 | ¾ gal | 10,000 |
| 7.0–7.2 | ½ gal | 10,000 |
PRODUCT DESCRIPTION
Pool Zyme is a natural Phyto enzyme-based formula with organic botanical extracts and 100% other biodegradable ingredients. It’s non-toxic, non-irritating and it’s environmentally friendly and is designed to prevent scum buildup and black waterline rings. This concentrated enzyme-based formula breaks down suntan oils, cosmetics, body oils, wastes, and other organics that contaminate the pool water. It conditions water to naturally purge itself of contaminants, leaving pools crystal clear and odorless. It is totally compatible with most swimming pool care products and reduces the need for any chemical treatments you might use. It helps stabilize pH levels, avoid water upsets, and it is effective on scum lines.
Pool Zyme acts as a continuous filter cleaner; it eliminates contaminants that clog filters reducing efficiency. Continuous use of this product on a regular basis saves time and money on filter repair and maintenance.
BENEFITS
- Reduces eye irritation.
- Improves water clarity.
- Eliminates waterline rings.
- Eliminates body oils and cosmetic residue.
- Eliminates chemical odors.
- Effective on scum lines.
- Reduces chemical treatments.
- Safe for plants, pets and humans
Directions
| POOL ZYME (fl oz) | VOLUME POOL WATER (Gal) | FREQUENCY |
| 1 | 2000 (30 ml/7000 L) | Per week |
| 4 | 8000 (120 ml/30,000 L) | Per week |
| 8 | 16,000 (240 ml/60,000 L) | Per week |
This bottle treats more than 66,000 gallons (250,000 L) of pool water per week. Dosage can be adjusted based on a frequency of use and the condition of pool water.