DESIGNED TO USE ON ALL TYPES OF HARDWOOD FLOORS
All-Purpose Hardwood Floor Cleaner is designed for use on all types of hardwood floors such as laminate, synthetic wood, and plastic and vinyl wood planks. It is excellent for daily or frequent cleaning and before the use of a spray and buff product.
Easy-to-use, All-Purpose Hardwood Floor Cleaner is effective and safe on floors and quickly removes food stains, heel marks, dirt, dust, and haziness. It is biodegradable and eco-friendly. It leaves no film and will not damage or dry wood surfaces and will not remove the wood floor‘s wax or coating. Diluted with water for easy application, it goes to work immediately—absorbs, emulsifies, and floats soil away.
ADVANTAGES
| DEEP CLEANS | It contains enzymes and a deep-penetrating emulsifier that penetrate and float away even the most stubborn grease and soils. |
| WATER SOLUBLE | Mixes with water for fast, safe-cleaning action. May be diluted with 1‒15 parts of water for dependable cleaning power and costs pennies per gallon |
| 100% FIREPROOF | Will not burn or support combustion. It is fireproof and does not give off dangerous toxic fumes. Use safely inside or outside. |
| ECONOMICAL | It may be sprayed or mopped onto surface, reducing cleaning cost by eliminating waste and saving costly man-hours. It helps prolong the life of surfaces and equipment. |
| NON-TOXIC | Contains no carbon tetrachloride, naphtha, benzene, kerosene, gasoline, or other hazardous solvents that produce toxic fumes. Safe to use in commercial kitchens and food-storage facilities. |
| LEAVES NO FILM | It cleans and removes residue and leaves a clean, bright surface that doesn’t leave an oily film. |
| VERSATILE CLEANER | It may be used as a stripper for removing old wax. |
DIRECTIONS
GENERAL CLEANING
| PURPOSE | ALL-PURPOSE HFC (oz) | GAL/WATER (Hot or Cold) |
| Daily or light cleaning. | 4 oz | 1 |
| Heavy cleaning, after stripping or before applying floor finish | 8–12 oz | 1 |
Product Description
VERSATILE CLEANER: All-Purpose Carpet Cleaner for Extractors can be diluted with water to be used in carpet extractors and/or shampoo machines.
CLEANS SAFELY: Effective and safe on all types of fabric and carpet fibers: nylon, synthetic, and wool and stain resistant carpets and fabrics.
DEEP CLEANS: It contains a deep penetrating emulsifier that penetrates and floats away even the most stubborn grease and soils.
NON-TOXIC: Contains no carbon tetrachloride, naphtha, benzene, kerosene, gasoline, animal fat or other hazardous solvents that produce toxic fumes. Free from VOCs.
NANO-cleaning technology effectively treats the following stains:
- Grease and oil stains.
- Dirt and mud stains.
- Ketchup and coffee stains.
- Soft drinks and chocolate stains.
- Urine and blood stains.
- Vomit and organic food stains.
Directions
Spray on carpet stain, wait two to three minutes then scrub with nylon brush and dab with a wet sponge, paper towel or cloth. If stain remains, repeat previous steps until stain disappears.
For Large and Stubborn Stains: Prewet carpet stain with water. Spray carpet cleaner and cover with clear plastic film for one hour; rinse with water and use carpet extractor or shampoo machine to clean and vacuum excess water and residue. Close wet area to foot traffic until the area dries.
Product Description
VERSATILE CLEANER: All-Purpose Carpet Spot and Stain Remover can be diluted with water to be used in carpet extractors and/or shampoo machines.
CLEANS SAFELY: Effective and safe on all types of fabric and carpet fibers: nylon, synthetic, and wool and stain resistant carpets and fabrics.
DEEP CLEANS: It contains a deep penetrating emulsifier that penetrates and floats away even the most stubborn grease and soils.
NON-TOXIC: Contains no carbon tetrachloride, naphtha, benzene, kerosene, gasoline, animal fat or other hazardous solvents that produce toxic fumes.
NANO-cleaning technology effectively treats the following stains:
- Grease and oil stains
- Dirt and mud stains
- Ketchup and coffee stains
- Soft drinks and chocolate stains
- Urine and blood stains
- Vomit and organic food stains
Directions
Spray on carpet stain, wait two to three minutes then scrub with nylon brush and dab with a wet sponge, paper towel or cloth. If stain remains, repeat previous steps until stain disappears.
For Large and Stubborn Stains: Prewet carpet stain with water. Spray carpet cleaner and cover with clear plastic film for one hour; rinse with water and use carpet extractor or shampoo machine to clean and vacuum excess water and residue. Close wet area to foot traffic until the area dries.
INDUSTRIAL STRENGTH CLEANING POWER
VERSATILE CLEANER: All-Purpose Fabric and Carpet Stain Remover can be diluted with water to be used in carpet extractors and/or shampoo machines.
CLEANS SAFELY: Effective and safe on all types of fabric and carpet fibers: nylon, synthetic, and wool and stain-resistant carpets and fabrics.
DEEP CLEANS: It contains a deep-penetrating emulsifier that penetrates and floats away even the most stubborn grease and soils.
NON-TOXIC: Contains no carbon tetrachloride, naphtha, benzene, kerosene, gasoline, animal fat or other hazardous solvents that produce toxic fumes.
REMOVES FOLLOWING STAINS
- Grease and oil
- Dirt and soil
- Ketchup and coffee
- Soft drinks and chocolate
- Urine and blood
- Vomit and organic food
- Many fabric related stains
Directions
Spray All-Purpose Carpet and Fabric Stain remover on the stain/spot. After 2‒3 minutes, scrub the stain/spot with a nylon brush and dab it with a wet sponge, paper towel, or cloth. If the stain/spot remains, repeat previous steps until the stain/spot disappears. For light stains, apply directly to the stain and dry the surface, repeat application if needed. Pretest surface for darker color fabrics before use.
Large and Stubborn Stains/Spots: Prewet the stain/spot with water. Apply cleaner on the stain/spot and cover it with a clear plastic film for 1 hour. After 1 hour, rinse the stain/spot with water and use a carpet extractor shampoo machine to clean and vacuum any excess water and/or residue; close off the wet area until dry to prevent foot traffic stains.
NO WAX BUILD-UP, NO SLIPPERY SURFACE, NO SOAP RESIDUE
Hardwood Floor Clean and Shine is safe to use on all polished wood floors. It cleans and shines all types of hardwood floors, leaving a one-step clear coating. Simply spray on hardwood floor and wipe off.
Regular use will restore natural luster and beauty.
This product removes from hardwood floors:
-
- Fingerprints
- Smudges
- Shoe marks
- Dirt
It restores back the original shine and also helps protect against ordinary wear, water spills and stains.
Directions
Do a small area at one time.
Using a cotton towel for wiping until floor is dry and it shines.
Do not use on bare wood floors.
Note:
Safe product: Contains no detergents or solvents.
Product description
- Cleans and beautifies marble in one step.
- Rinsing is not required.
- This product will neutralize salt and ice melt on floors.
- It will not make surfaces slippery.
INSTRUCTIONS
Use a CLEAN mop on marble, tile and hard surfaces―a CLEAN mop is required to get appropriate results. This product can also be sprayed on carpet to neutralize the effects of ice melt. It is important to extract the chemical from the carpet to avoid mildew or mold.
DILUTION:
Light Cleaning: Mix 4‒6 oz of Marble and Floor Cleaner with one gallon of water.
Cleans up to 200 sq ft.
Heavy-Duty Cleaning: Mix 8-12 oz Marble and Floor Cleaner with one gallon of water.
Cleans up to 200 sq ft.
Product Description
Neutral Floor Cleaner is designed to be used on all types of hard floor surfaces. This cleaner is in concentrated form. It works in hot or cold water and is great for daily or frequent cleaning and before the use of a spray and buff product.
Biodegradable, Neutral Floor Cleaner is effective and safe on floors. It is easy-to-use, fast-acting, leaves no film, will not remove wax or coating of the floor, and reduces the cost of labor.
DESIGNED TO USE ON
- Smooth concrete floors.
- Polished wood floors.
- Vinyl tile floors.
- Stone and masonry tile floors.
- Stamped concrete floors.
Directions
DILUTION
- Use 4 oz of product to each gallon of water for daily or light cleaning.
- Use 8 oz–12 oz of product for each gallon of water for heavy cleaning or after stripping and before applying floor finish.
- Covers approximately between 500–800 sq ft.
FOLLOW THESE STEPS FOR OPTIMUM SHINE:
- Clean and mop floor. Use surface neutralizer if possible.
- After floor is dried, apply Quick Shine Coating with nylon mop.
- Wait 10– 5 minutes until wax is dried; buff at a high speed.
HIGH GLOSS
Apply 2–5 coats of Quick Shine Coating to achieve desired gloss. High-speed buffing is required after each application.
CLEAN UP
Clean pad and other equipment with soap and warm water.
COVERAGE
1 gallon. may cover from 150 – 400 square feet depending on the number of coats applied.
Rapid Restore is design for frequent maintenance of EST Inc.’s Wet Look 2000-109, floor finish for VCT tiles. It is designed to fill in minor scratches, surface scuffmarks, heel marks, restore and even out gloss, and other surface imperfections. It restores the finish to its original stage.
Used once a week, or as needed, this product will greatly multiply the beauty and the longevity of an existing floor finish.
How It Works: Rapid restore works by slightly softening the top-coat (upper layer) for about 2 to 3 minutes. This gives enough time to clean and restore the scuffmarks and surface scratches. Once the floor dries the surface coat will regain its original film hardness. Will not interfere with the gloss.
ADVANTAGES
- Renews high-shine and non-slip finishes.
- Floors always look newly finished.
- Gives the highest shine.
- Eliminates all possibility of powdering.
- Minimizes scuffing.
- Delays stripping and recoating.
- Non-yellowing.
- Fully VOC-compliant.
DIRECTIONS
Shake well before using. Coverage rates can range from 1,400-1,800 sq ft per gallon.
Application:
Remove dust, dirt, and debris with dust mop. Use EST Inc.’s Neutral Floor Cleaner for regular cleaning as needed depending on surfaces’ use. Floor must be mopped, clean, and dry before applying Rapid Restore – Wet Buff & Shine. This product is designed to be used while surface wet.
Treat and apply small areas, 10 x 20 sq ft area.
Lightly spray product over surface with hand sprayer or use microfiber pad to apply.
Start buffing or burnishing immediately with a highspeed burnisher. Keep floor wet while burnishing.
Buff floor surface while product is still wet, until floor begins to look clean, dry, and gloss begins to appear.
Do not allow product to puddle on the floor. If puddling occurs on the floor, pick up excess residue with mop or microfiber pad.
If buffing pad begins to clog with coating residue or appears dirty, turn pad over or use a new pad. The used pad can be rinsed and reused.
Follow with burnisher until entire floor surface looks even and glossy. Reexamine floor and reapply this product on missed areas to even out gloss to the entire floor.
Repeat application regularly as needed depending on floor condition and traffic.
CONDITIONS OF SALE
Always follow all label directions. The manufacturer cannot control weather conditions, methods of application nor the condition of the area at time of application. Buyer assumes all risks of use, storage or handling of this product when used in a manner inconsistent with label directions. EST Inc. will not be responsible for any injury, loss, or damage if product is used or stored in any manner not in compliance with label/tech sheet directions or if precautions are not observed.
STORAGE AND HANDLING
Note: Follow directions carefully. Always consult your dealer or supplier for timing, methods and to customize application, depending on contaminations.
Wear rubber gloves and eye protection. harmful if swallowed, avoid any direct contact with the skin and eyes; may cause irritation.
Keep container closed when not in use. Store out of direct sunlight. Keep from Freezing. Avoid temperatures above 120 °F, or below 40 °F.
FIRST AID
EYES: Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical attention if irritation persists.
SKIN: Wash thoroughly any exposed effected body parts with soap and water. Consult a physician if irritation develops.
INGESTION: If this product is swallowed do not induce vomiting. If vomiting occurs, keep head below hips to prevent aspiration (breathing) of liquid into the lungs. Get emergency medical attention immediately.