Automotive Products

Our Automotive Products

Automotive Bug & Tar Remover is excellent for cleaning tar, bugs, spa, and oil from autos.

This product is specifically designed to effectively remove debris while not harming the clearcoat.


Test and protect surrounding area.

  1. Brush or spray asphalt remover liberally.
  2. Let set for 2‒3 minutes.
  3. Re-apply cleaner, brushing stained areas vigorously.
  4. Rinse off with water.

Note: High-pressure rinse recommended for highly porous surface. For interior surfaces, rinse water may be applied with a stiff brush. Remove embedded stains with agitation.

Battery Cleaner is water-based and safe to use on all types of batteries. It neutralizes battery acid instantly and restores power. It removes oil, corrosive acid, grease, dirt, and moisture from terminals, connectors, cell tops, frames and cables, heavily-sulfated battery terminals, and casings. Battery Cleaner removes acid corrosion and restores full power and provides tough, dependable cleaning that helps extend battery life. Indicator reveals presence of acid and hairline fractures in casing. This product is safe on aluminum and all types of battery conductors and terminals.

Use on all vehicle batteries for vehicles such as fork lifts, golf carts, cars, trucks, buses, and taxis. It is also recommended for auxiliary generators, emergency equipment, railroad equipment, construction equipment, and all other types of batteries in or out of storage.

Battery cleaner is the complimentary product to ICC Battery Terminal Coating to provide optimum protection after cleaning.


  • Corrosion
  • Acid
  • Grease
  • Oil
  • Dirt
  • Moisture


  • Make sure no power is being drawn from the battery.
  • Use small sprayer to apply the product. 
  • Use concentrate, DO NOT dilute this product.
  • After applying wait 3–5 minutes then rinse off with water until foam disappears.
  • Repeat application if needed.
  • Features

    • Blasts away deposits.
    • Removes brake fluid, grease, and oil.
    • Reduces wear on parts.
    • Stops disc brake squeal.
    • Contains no chlorinated or fluorinated solvents.
    • No fouled waste oil.
    • No lead, phosphorous or Silicone.
    • Does not harm brake pads.
    • Does not contain methanol or methylene chloride.
    • Parts can be rinsed off with water or air-dried.


    Clean brake parts and related components by brushing, soaking, or spraying with solution. Flush with water under pressure. Heavily-soiled components may require a second application. Removal of heavy grease encrustation before applying cleaner will enhance the effectiveness of this product.

    Brake Parts Cleaner also does an excellent job in cleaning grease from chassis, wheels, running gears, and bearings.

    Removes break dust, carbon, grease, and oil scum.

    • Protects rubber and plastic parts from overspray.
    • Do not spray on hot or warm surfaces.

    Especially Formulated for Cleaning, Polishing, and Protecting Auto Finishes

    CEN-O-WAX is designed for all brush or brushless car washes and removes accumulated dirt, grease, and oil film. CEN-O-WAX polishes auto surfaces to a high gloss shine. It lays down a microscopic, protective coating surface to preserve auto finishes. It is a powerful triple action cleaner, polish and surface protectant.


    • Formulated for automatic car and truck washes. 
    • May be re-circulated for repeated use. 
    • Lubricates nylon brushes and avoids streaks on auto finishes.


    Surface shine may depend upon water hardness and purity of water. Soft water may enhance the shine of auto surfaces. Use proper tip required by or pump manufacturer.

    CEN-O-WAX may be diluted 1 part concentrate to 10‒15 parts of water for all automatic car washes.


    Adjust and change dilution tip for proper mix ratio.


    Diesel Exhaust Fluid (DEF) is an organic, non-toxic compound made with the highest component purity.

    DEF is carefully regulated by the American Petroleum Institute and helps to convert NO2 into nitrogen gas and water vapor. It is stable, colorless, odorless, and meets accepted international standards for purity and composition.


    2.5 gallons of DEF will yield over 800 miles of travel. You can drive from Los Angeles to Boston and back on less than a single 23-gallon tank of DEF (estimated usage rate is approximately 2% per gallon of fuel.)


    At temperatures below 12°F (DEF freezing point), trucks will become operational after the DEF tank-thawing process is complete. There is no concern regarding thermal stress with the plastic DEF tank. Tanks have been extensively tested in a variety of extreme conditions. DEF, when heated and maintained at a temperature above 120°F, will very slowly start to form a small amount of ammonia. It would take over two years at this constant temperature to convert DEF into levels of household ammonia.


    All DEF tanks and miting equipment are dedicated to diesel exhaust fluid production.

    It is handled and packaged to ISO 22241 standards for cleanliness and product integrity.

    All DEF fluid is filtered to 1 micron as we package totes and drums. Filled drums and totes are segregated and quarantined until full lab test results are returned.


    With Selective Catalytic Reduction (SCR), engine maintenance intervals will remain the same as 2007 maintenance intervals, with one additional service point: the DEF filter.

    The DEF filter should only need to be changed every 200,000 miles and can be changed in minutes.

    With SCR, engine components last longer due to less heat generation and fewer contaminants. The result is longer overall engine life. 

    FACT: One and a half teaspoons of salt combined with 4500 gallons of DEF is enough to poison an SCR catalyst. 


    DEF is probably the most difficult product you encounter because of its sensitivity to contamination. The smallest particle of contamination may render your product inappropriate for use in your truck. 

    Product purity is essential to the performance and working life of your treatment system. A problem with your after treatment system can run into tens of thousands of dollars in repair and downtime costs.

    EST Inc. ultra-pure products are manufactured to the strictest industry specifications to help prolong catalyst life.

    The nozzle and filling equipment are used to fill the vehicle tank and can be a major source of contamination. It must be wiped clean before each use.


    EST Inc. has taken extreme measures to ensure that the product you put into your truck meets ISO 22241, the DEF quality specification. Protocols have been established to guard against possible contamination; customers can rely on getting only the highest quality product per industry specifications. EST Inc. uses storage and handling equipment dedicated solely to DEF.

    DEF is non-hazardous by DOT, and is not regulated by EPA. It is classified as a non-flammable by the fire department.

    We recommend that all DEF containers are kept indoors away from the elements.

    The valve on the bottom of the note needs to be accessible for refilling.

    The only materials recommended for wetted areas are stainless steel and high-density polyethylene. Avoid carbon steel, iron, nickel, or copper.

    DEF freezes below 12°F and loses shelf life when the average daily temperature of the fluid is above 86°F.  


    Urea 31.8‒33.2 % by weight
    Density (at 77°F) 9.05‒9.09 Pounds/Gal
    Refractive Index (at 77°F) 1.3814‒1.3843
    Alkalinity (as Ammonia) Max  0.20000 % by weight Determines shelf life.
    Insolubles Max  0.00200 % by weight Clogs spray nozzles.
    Calcium Max  0.00005 % by weight
    Magnesium Max  0.00005 % by weight
    Aldehyde Max  0.00050 % by weight Forms gummy deposit in exhaust pipe.
    Sodium Max  0.00005 % by weight Will damage catalyst.
    Potassium Max  0.00005 % by weight
    Phosphate Max  0.00005 % by weight
    Biuret Max  0.30000 % by weight
    Aluminum Max  0.00005 % by weight
    Iron Max  0.00005 % by weight
    Copper Max  0.00002 % by weight
    Zinc Max  0.00002 % by weight
    Chromium Max  0.00002 % by weight
    Nickel Max  0.00002 % by weight

This unique product is designed to be used with automatic part-cleaning machines or by manual cleaning. This product contains special anti-rust additives and fast-acting emulsifiers to remove grease, oil, and carbon stains faster than ordinary part cleaners. It is water-based, eco-friendly and VOC-compliant.

This specially-formulated product will emulsify the oil, grease, solvent, and dirt, and then wash them away. If heavy encrustation of grease is removed before applying cleaner, it will greatly enhance the performance of this product.


Clean engine and motor by brushing or spraying the solution on surfaces. Wait 2‒3 minutes and then flush with water under pressure. A second application may be required under extreme conditions.

Designed to apply on auto and boat upholsteries, leather dashboards, couches, chairs, nightstands, and ottomans, EST’s Leather Conditioner can rejuvenate, rehydrate and renew faded, worn-out leather surfaces. EST’s Leather Conditioner works also works on imitation leather and vinyl surfaces. This conditioner will restore minor scratches and fading become less noticeable or in some cases it disappears completely.


Use and apply with lint-free micro-fiber application cloth to rub a thin even layer of Leather Conditioner into the leather. Let this conditioner absorb into the leather surface, allow few minutes to fully absorb into the leather. Wipe of excess wetness with dry micro-fiber cloth.

1 gallon may cover 200–300 sq. ft. depending on age and porosity of the leather. Some surfaces may take two applications.

Note: Be sure to test Leather Conditioner on a small area before covering the entire piece of furniture. Allow the test area to dry fully before applying the conditioner to the rest of the leather. In some cases, this product may slightly deepen the shade and grain of the leather, but the original color typically returns over time as this leather conditioner becomes saturated and spreads deeper into the surface.


  • Rehydrate and improve luster
  • Hides minor scratches and restores appearance
  • Protects from UV lights
  • Repels water, dirt and minimizes staining
  • Protects and extends life of leather surfaces.
  • Provides protection from salt staining and hides scratches and scuff marks
  • Water-free so it will not harm leather or vinyl.


Physical State Liquid
Odor None
Color Milky white
Specific Gravity @ 25°C ~0.8
Boiling Point  300°F
VOC 0.0


Always follow all label directions. The manufacturer cannot control weather conditions, methods of application nor the condition of the area at time of application. Buyer assumes all risks of use, storage or handling of this product when used in a manner inconsistent with label directions. EST Inc. will not be responsible for any injury, loss, or damage if product is used or stored in any manner not in compliance with label/tech sheet directions or if precautions are not observed.


Note: Follow directions carefully. Always consult your dealer or supplier for timing, methods and to customize application, depending on contaminations.

Wear rubber gloves and eye protection. Avoid contact with open wounds or sores, harmful if swallowed, avoid any direct contact with the skin and eyes; may cause irritation.

Keep container closed when not in use. Store out of direct sunlight. Keep from Freezing. Avoid temperatures above 120 °F, or below 40 °F.


EYES: Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical attention if irritation persists.

SKIN: Wash thoroughly any exposed effected body parts with soap and water. Consult a physician if irritation develops.

INGESTION: If this product is swallowed do not induce vomiting. If vomiting occurs, keep head below hips to prevent aspiration (breathing) of liquid into the lungs. Get emergency medical attention immediately.

Nano Lube – Engine Treatment is a super lubricant designed for all types of gasoline and diesel engines. Its integrated technology surpasses all other products currently offered in today’s market.

Nano Lube is made with revolutionarily Nano technology. This technology combines Nano particles of graphite and Nano molecules of siloxane creating a positive fusion which bonds to metal instantly at a microscopic level in extremely high or low temperatures. The bonding provides unsurpassed, state-of-the-art, long-lasting lubrication, protecting all types of gasoline and diesel engine components.


  • Provides excellent lubrication and reduces friction.
  • Stable at high and low temperatures.
  • Prolongs engine life by reducing wear on key components.
  • Improves gas mileage.
  • Reduces bearing and valve wear.


Nano Lube is safe to use with all types of engine oil designed for both older and newer automobiles. Nano Lube easily mixes with fully-synthetic blends and regular oils, including 5W-30, 10W-30, 10W-40, 20W-50, and many specialty oils used in today’s market.


For a normal oil change, use 1 quart of Nano Lube per 3 quarts of engine oil. Use Nano Lube every 3rd or 4th oil change (if the oil change interval is at 4,000–5,000 miles) or once a year (or every 12,000–15,000 miles).

Parts Washer Solvent and Degreaser is a uniquely designed product for cleaning mechanical parts either in automatic cleaning machines or by manual methods. This product contains special anti-rust additives and fast-acting emulsifiers to remove grease, oil, carbon, and stains faster than ordinary parts cleaners.

Clean engine and motor by brushing or spraying the solution on the surface; wait 2–3 minutes then flush with water under pressure. A second application may be required under extreme conditions.

This specially-formulated product will emulsify oil, grease, solvents, and dirt and wash them away. Removal of heavy grease encrustation before applying cleaner will enhance the effectiveness of this product.

Rubber and Vinyl Dressing is designed to restore luster, leaving deep gloss shine on all types of automobiles tires, vinyl, and leather. This product is water-free, so it will not harm leather or vinyl.


Physical State Liquid
Odor Slight (Solvent-based)
Color Clear Liquid
Specific Gravity @ 25°C ~0.8
Boiling Point  300°F


SBY Penetrating Oil Nano Lube is formulated from specially-processed vegetable oil, wool wax, highly-refined, non- petroleum oils and selected agents to provide corrosion control, penetration, metal wetting and water displacement. This long-lasting product contains no solvents, will not dry out, and will penetrate to the base of all metals, providing corrosion protection from both natural and industrial atmospheres. Heavily corroded and/or frozen parts such as nuts, bolts, shafts, etc. that would normally be damaged during maintenance, can be salvaged by applying special oil.


Appearance Clear, straw-colored liquid.
Flash Point Bulk Liquid,(ASTM-92) Cleveland Open Cup: 405°F minimum
Non-Volatile 89% minimum (3 hours @ 220°F). 
VOC Less than 1% 
Specific Conductivity Less than 10 -9 ohm/cm @ 1 MHz
Specific Gravity 0.875–0.885 (less propellant).
Effect on Rubber ASTM D-471 @ ± 158°F 70 hours:   None on neoprene, Buna-n and most ASTM D-471 @ ± 158°F 70 hours:  None on neoprene

ASTM D-471 @ ± 158°F 70 hours: None on neoprene, Buna-n and most synthetics. Some swelling on natural rubber.

Effect on Paint None on most painted surfaces.
Effect on Aluminum No pitting
Extreme Pressure ASTM D-2782 Timken Method:  Fail load – 15 pounds
Wear Prevention, Characteristics ASTM D-220 Four Ball Method 40 Kg., 1200 RPM for 1 hour @ 167°F:  Scar diameter of 0.49 mm
Repaintability Contains no silicones. It is recommended that surfaces treated with SBYPAC OIL should be cleaned with hot water or steam detergent (120°F), whichever is most effective.
Corrosion Protection ASTM D-1735 Humidity Cabinet:  Passes 50 days
Water Replacement Displaces water from all metal surfaces.
Toxicity Non-toxic, LD-50 greater than 3 grams per kilogram. Non-irritating skin response. Very slight irritation to the eyes. (Toxicity tests performed according to standard methods by an independent laboratory).
NAS Combustible. Do not incinerate.
Spray Nozzle Cleaning Turn can upside down, point in a safe direction and spray until only propellant escapes. If spray button becomes clogged during use, pull it from the can and clean it with a fine wire or needle. Replace the button with a gentle twisting motion, keeping it pointed in a safe direction. Do not stick pins or other objects into nozzle tube.

Tire Bead Lubricant

Tire Glide is designed for the professional mechanical/tire shop that mounts and dismounts tires.

This tire bead lubricant will not stain clothing or wheels. Tire glide contains rust inhibitors. It is safe to use with all types of wheels and tires; it is pH balanced and contains no malodors, nor creates any fumes. Tire Glide comes packaged in a quart bottle; one quart makes one gallon of ready to use product.


Apply on both sides of the tire rim before installing wheel.

Tire Seal Dressing is designed to restore luster, leaving deep gloss shine on all types of automobile tires, vinyl, and leather. This product is water-free; it is not harmful to leather or vinyl.



For best results, surface should be clean and dry. Use in well-ventilated area or an exterior site when applying this product. If surface is porous, more than one application is recommended for an even shine. Spot test surface before each application.

Spraying, brushing, or wiping are acceptable application methods. Each approach will change the application characteristics and finish. If dirt or grease were not removed during normal wash, than brush or wipe application is more effective.


Do not smoke while applying this product. Solvent fumes can be harmful and although not flammable; under certain conditions, Tire Seal Dressing will burn. After application of this product in the interior of a vehicle, leave all windows open for at least 2 hours to reduce smell and fumes.


Physical State Liquid
Odor Slight (Solvent-based)
Color Clear Liquid
Specific Gravity @ 25°C ~0.8
Boiling Point  300°F

Automatic Windshield Solvent Concentrate

Removes oil, film, dirt, and water spots.



During warm weather months, use 2 ounces per washer jar.


For 0°F protection, use concentrated.

In freezing temperatures, be sure defroster has warmed windshield before using washer.