Agriculture Products

Brix Up Liquid Brown Sugar with Humic  adds complex carbohydrates in the form of bio-available sugar to plants. Using brown sugar to add carbohydrates increase plant vigor.

BENEFITS

• Contains complex carbohydrates in the form of cane molasses.
• Help increase overall plant mass by improved nutrient uptake.
• Helps raise glucose level in your crops.
• Helps condition the soil for improved plant performance and vigor.
• Optimizes conditions for resistance of and tolerance to abiotic stress.
• Promotes rapid nutrient uptake through the root system.
• Energizes beneficial microbes.
• Supports native soil organisms and beneficial microbes.
• Increases organic matter in the soil.
• Enhanced absorption for better performance.

EASE OF USE

• Fast-acting and 100% water soluble.
• Easy to handle and tank mix.
• Economical, with low application rates.
• Can be applied through irrigation systems.
• Can be applied with drip irrigation system.
• Can be applied in-ground or side dressed.
• Designed to be used by itself or mixed with various other NPK fertilizer formulations.
• Can be mixed with various liquid fertilizers formulations and herbicides.

DIRECTIONS

General recommendation; use 16–32 fl oz per acre, with 10–15 gallons of water. For best results apply 3 times during the growing season. Application should be made directly to the leaf surface in the form of a foliar spray. Mix well before applying.

Soil or Drip irrigation system: use 16–24 fl oz per acre with every feeding cycle.

During seed and planting: use 16–20 fl oz per acre with 10–15 gallons of water.

Recommendations

To ensure compatibility, a jar test or strip test should be conducted before adding to your tank mix. Use in accordance with recommendations of a qualified individual or institution, such as, but not limited to, a certified crop advisor, agronomist, university crop extension publication, or apply according to recommendations in your approved nutrient management plan.

Note:

Bio Amino Cell Fusion takes the nitrogen from the air (N₂) and produces ammonia (NH₃) and a form of nitrogen that can be utilized by the plant very easily.

Microbes penetrate the root structure below the soil, where they multiply and stimulate the formation of root nodules and help with multiplying of plant cells and bacteria in conjunctions. Within the nodules, the bacteria convert free nitrogen to ammonia, which the host plant utilizes for its development.

Bio Amino Cell Fusion contains components that benefit nitrogen-fixing bacteria found in soils.

Bio Amino Cell Fusion is excellent for lawn, grass, turf, row crops, alfalfa, pasture ground, hay, fruits, and vegetables, contains balanced minerals and humic acids with other essential nutrients. This composition helps break down salt and soil compaction helping release “tied up” minerals in the soil. Cultured soil microbes decompose chloride and other sodium-based salts that interfere with soil pH. Bio Amino Cell Fusion will help balance the soil pH and helps nutrient and fertilizer uptake for healthier plant growth.

FEATURES

Contains no animal fat or manure. It will not interfere with pesticides and herbicides and is safe to use on newly-seeded and existing lawns. Bio Amino Cell Fusion can be used on all soil types, such as sandy, clay, loamy, silty, peaty, saline, black, red, yellow, and chalky and with all types of row crops, vegetables, fruit trees, sod, turf, lawn, hay, cotton, peanuts, potatoes, beets, hemp, and various other crops.

BENEFITS

• Increases organic matter in the soil.
• Increased microbial activity leads to greater air/soil circulation.
• Loosens soil mineral compactions.
• Breaks down and reduces soil compactions and chemical and salt residues left behind by fertilizer, herbicide, insecticides, and many Ag chemicals that contain dangerous amounts of salt.
• Makes soil closer to neutral pH and ready for row crops and vegetables grown in one-season applications.
• Helps maintain pH close to normal based on soil type and region.
• Helps retain moisture, minerals, and other plant nutrients in sandy and clay-type soils.
• Supports and improves abiotic stress tolerance.
• Increases water retention.
• Supports native beneficial soil organisms and beneficial microbes.
• Increases metabolic activity of soil microorganisms
• Changes soil cation exchange capacity (CEC).
• Helps condition the soil for improved plant performance and vigor.

EXCELLENT RESULTS

After initial application Bio Amino Cell Fusion helps conditions soil for greater root mass within seven days, leading to plant growth through optimized nutrient uptake. Thatch residue should also begin decomposition within a few weeks with adequate moisture and temperatures over 60 degrees. After one year of use, uneven areas (slight bumps) can be less evident and if soil pH is not less than 7.0, extra ordinary results are possible. Proper application also may increase resistance to drought and temperature stress.

APPLICATION

• Foliar: Apply 1–2 quarts of concentrate per 1 acre of space, premix with 10–15 gal of water.
• In-furrow: Apply 2–4 quarts per acre; premix with 10–12 gal of water.
• Side Dress: Apply 2–4 quarts per acre; premix with 10–12 gal of water.

Note: Generally, effects of improved soil rhizosphere can be noticed within two to three weeks after product application. Results may vary depending on present conditions. Apply 3–4 times per season.

Note:

Compost Accelerator-1210 speeds up the decomposition process of organic material in vegetable gardens, hayfields, row-crop fields (corn, wheat, soybean, dead stalks), turf, and lawn. It contains specially-selected strains of various enzyme-producing groups of bacteria to aid the decomposition process. Compost Accelerator-1210 is a highly-concentrated, microbial solution containing one-billion viable microorganisms per milliliter.

Compost Accelerator-1210 also contains soil-essential microbes that stimulate naturally-occurring bacteria within compost piles, helping them to reach their optimum working capacity more quickly. This product also contains a natural moisture-retaining technology to prevent dehydration. As a result, the metabolic transformation of waste into compost can be reduced to as little as four to six weeks depending upon temperature and moisture. It is designed to use after harvesting crops.

BENEFITS

• Accelerates composting process.
• Contains all-natural bio enzymes.
• 100% biodegradable.
• Environmentally safe and VOC compliant.
• Increases essential biological activity in soil.
• Increases nitrogen level in soil naturally.
• Designed for all soil types, crops and farming.
• Easy-to-use water-soluble formula.
• Eliminates unpleasant odors and gases through biological ion exchange.

DIRECTIONS

APPLICATION

Use after harvesting and apply when temperature is above 45°F.

Row Crops and Hayfields: Use 4–5 quarts of Compost Accelerator-1210 per acre. Mix with 6–12 gal of water and spray apply over entire field.

Turf, Grass and Vegetable Gardens: Use 2–3 quarts of Compost Accelerator-1210 per acre. Mix with 6–12 gal of water and spray apply over the entire field.

Note: Follow directions carefully. Consult your dealer or supplier for timing and methods of application. Application rates may vary based on type of soil, soil condition, soil testing, climate and field type.

Bio Kelp feeds soil beneficial soil microbes. Also supports beneficial microbes/augments activity and function of beneficial microbes. Contains Kelp. Enhanced absorption for better performance.

Bio Kelp It will not interfere with pesticides and herbicides and is safe to use on newly-seeded and existing lawns. Bio Kelp can be used on all soil types, such as sandy, clay, loamy, silty, peaty, saline, black, red, yellow, and chalky. May be applied to row crops, small grains, legumes, turf, trees, berries, melons, fruits, vegetables, forages, and horticulture.

Use per acre	Bio Kelp	Mix Well with Water
Planting	20–30 fl oz	10–15 gallons
Foliar	16–25 fl oz	10–15 gallons
Side Dress	16–32 fl oz	10–15 gallons
Fertigation	16–32 fl oz	10–15 gallons
Compatible and blends easily with most other Enviro Science Technologies Inc.’s. micro- blends, NPK, and soil amendment products.

Note:

Liquid Humic contains humic acid, in an easily mixable form that may help micronutrient uptake for plants.

ADVANTAGES

Increases drought, heat, and cold resistance.

Improves soil moisture.

Restores soil carbon balance.

Reduces water runoff.

Improves trace-element nutrition through chelation.

Helps prevent/correct chlorosis.

Holds exchangeable plant nutrients.

Improves soil physical properties and food web diversity.

Contains salt buildup by reducing soil acidity.

Reduces fertilizer usage.

Reduces pesticide use.

Helps control pollutant contamination.

DIRECTIONS

Mix 16‒32 fl oz in a minimum of 10‒15 gallons of water per acre for both foliar and in-furrow application. Application rates and the number of applications necessary will vary with the severity of the soil conditions. Please consult a technical sales representative from Enviro Science Technologies Inc. for a custom designed protocol. Once diluted, product must be used within 24 hours. If soil temperature is below 45°F, performance is significantly reduced. Given the variables to consider, the number of applications prior to achieving desired results might vary.

Recommendations

To ensure compatibility, a jar test or strip test should be conducted before adding to your tank mix. Use in accordance with recommendations of a qualified individual or institution, such as, but not limited to, a certified crop advisor, agronomist, university crop extension publication, or apply according to recommendations in your approved nutrient management plan.

Note:

Soil Revitalizer

Soil Revitalizer sweetens and neutralizes the soil. It creates a better environment that helps condition the soil for improved plant performance and vigor.

Soil Revitalizer contains balanced minerals and humic acids with nano-enhanced carbon and soil-friendly microbes. Soil Revitalizer’s formulation combined with soil-essential microbes help break down chloride and other sodium-based salts as well soil compaction to help release “tied up” minerals in the soil. Decomposition of chloride and other sodium-based salts that interfere with soil pH chemistry is accomplished by aerating inner-soil molecules with help of nano-enhanced carbon. Depending on the present soil pH and compaction levels, Soil Revitalizer can increase and/or lower pH, based on soil acidity or alkalinity.

It is recommended soil be tested prior to application. In some cases, it may require 2 or more applications to bring the pH back to normal, depending on salt and other mineral compaction. Regular application of this product can keep the soil pH balanced and eliminate the annual dry-lime application. Frequent application of dry minerals and lime can create soil compactions and pH instability.

During and after this treatment, avoid applying other high-salt-based fertilizer products. Soil tests are necessary to determine proper rate of application and dosage required per acre for Soil Revitalizer. Contact your supplier for customized application details.

BENEFITS

• Increases organic matter in the soil.
• Loosens soil mineral compactions.
• Breaks down and reduces soil compactions and chemical and salt residues left behind by fertilizer, herbicide, insecticides, and many Ag chemicals that contain dangerous amounts of salt.
• Makes soil closer to neutral pH and ready for row crops and vegetables grown in one-season applications.
• Helps maintain pH close to normal based on soil type and region.
• Helps retain moisture, minerals, and other plant nutrients in sandy and clay-type soils.
• Supports and improves abiotic stress tolerance.
• Increases water retention.
• Supports native beneficial soil organisms and beneficial microbes.
• Increases metabolic activity of soil microorganisms
• Changes soil cation exchange capacity (CEC).
• Helps condition the soil for improved plant performance and vigor.

DIRECTIONS

Apply as Directed. Shake well before using. Soil pH must be determined before application. Consult your distributor or supplier for a customized and tailored application rate of this product based on soil pH and condition.

For good soil management and better overall plant nutrition Soil Revitalizer can be used on a regular basis during the throughout every growing season.

For soil with high compaction and high acidic pH levels

Soil pH	Dosage per acre	Water mix ratio
<3	2–3 gallons	10–15 gallons
3–5	1–2 gallons	10–15 gallons
5–6	2–3 quarts	10–15 gallons

For soil with high compaction and high alkaline pH levels

Soil pH	Dosage per acre	Water mix ratio
8–9	2–4 quarts	10–15 gallons
9–10	1–2 gallons	10–15 gallons

For Row Crops this Product can be side-dressed during the growing cycle to maintain the soil pH.

Can be foliar applied or side-dressed as needed to maintain soil pH during growing cycle. Use rate: 1–2 quarts per acre with 10–15 gallons of water.

This product may be used on many different crops. Rate information provided is a range and not specific to one crop.

General Recommendation for maintenance and regular use:

During annual growing cycle

For Row Crops: 2‒4 quarts of concentrate per acre. with 10–15 gallons of water.

For Alfalfa, Hay, & Pasture Ground: 1‒2 quarts of concentrate per acre. with 10–15 gallons of water.

For Lawn & Turf: 2–4 fl oz per gallon to cover 1000 sq ft

For Home Landscape & Gardens: 1–2 fl oz per gallon to cover 1000 sq ft.

Apply Soil Revitalizer to turf or gardens during the spring, summer or fall. It should be applied in the morning or early evening. It reacts with the soil within weeks, eliminating the need to apply the treatment 3–5 months in advance. Treat gardens after tilling and before planting. It may be used in combination with fertilizers, soil conditioners, and herbicides.

Note:

Soil Zyme for lawn, grass, turf, row crops, alfalfa, pasture ground, hay, fruits, and vegetables, contains balanced minerals and humic acids with other essential nutrients. This composition helps break down salt and soil compaction helping release “tied up” minerals in the soil. Cultured soil microbes decompose chlorides and other sodium-based salts that interfere with soil pH. Soil Zyme will help balance the soil pH and helps nutrient and fertilizer uptake for healthier plant growth.

FEATURES

Contains no animal fat or manure. It will not interfere with pesticides and herbicides and is safe to use on newly-seeded and existing lawns. Soil Zyme can be used on all soil types, such as sandy, clay, loamy, silty, peaty, saline, black, red, yellow, and chalky and with all types of row crops, vegetables, fruit trees, sod, turf, lawn, hay, cotton, peanuts, potatoes, beets, hemp, and various other crops.

BENEFITS

• Increases organic matter in the soil.
• Increased microbial activity leads to greater air/soil circulation.
• Loosens soil mineral compactions.
• Breaks down and reduces soil compactions and chemical and salt residues left behind by fertilizer, herbicide, insecticides, and many Ag chemicals that contain dangerous amounts of salt.
• Makes soil closer to neutral pH and ready for row crops and vegetables grown in one-season applications.
• Helps maintain pH close to normal based on soil type and region.
• Helps retain moisture, minerals, and other plant nutrients in sandy and clay-type soils.
• Supports and improves abiotic stress tolerance.
• Increases water retention.
• Supports native beneficial soil organisms and beneficial microbes.
• Increases metabolic activity of soil microorganisms
• Changes soil cation exchange capacity (CEC).
• Helps condition the soil for improved plant performance and vigor.

EXCELLENT RESULTS

After initial application, thatch residue should also begin decomposition within a few weeks with adequate moisture and temperatures over 60 degrees. After one year of use, uneven areas (slight bumps) can be less evident and if soil pH is not less than 7.0, extraordinary results are possible. Proper application also may increase resistance to drought and temperature stress.

Application

• Foliar: Apply 16–32 fluid ounces of concentrate per 1 acre of space, premix with 8–10 gal of water.
• In-furrow: Apply 1–2 quarts per acre; premix with 5–10 gal of water.
• Side Dress: Apply 1–2 quarts per acre; premix with 5–10 gal of water.

Note: Generally, effects of improved soil rhizosphere can be noticed within two to three weeks after product application. Results may vary depending on present conditions. Apply 3–4 times per season.

Note:

Bean Boost was formulated for easy mixing, even distribution and consistent, uniform delivery of micronutrients to each plant. It provides a synergistic, comprehensive, and plant-available blend to complement a liquid NPK fertilizer program.

BENEFITS

• Supports native soil organisms and beneficial microbes.
• Increases metabolic activity of soil microorganisms
• Changes cation exchange capacity (CEC).
• Enhances plant nutrient availability and uptake by biodegradation of organic matter.
• Increases soil nutrition and plant nutrition uptake for better plant performance and vigor.
• Promotes rapid nutrient uptake through the root system.

APPLICATION OPTIONS

• Apply Bean Boost at 2–3 quarts per acre with NPK in furrow or 2 x 2 at planting.
• Apply 2–3 quarts Bean Boost per acre as a foliar between 6 and 12 leaf stages.
• Bean Boost can be applied with 1st or 3rd pass of a compatible fungicide.
• Apply 3–4 quarts Bean Boost per acre with NPK in furrow or 2 x 2 at planting and 1–2 quarts Micro Mix per acre as a foliar application 2 times during the growing season.

Note: For more specific application rate per acre, please contact your distributor for details. Application rates may vary based on type of soil, climate, and seed type.

Note:

This micronutrient blend is intended for the prevention and/or correction of boron deficiencies. Boron Chelate can be applied directly to the soil or by foliar application. Can be used for lawn, grass, turf, corn, soybeans, other row crops, alfalfa, pasture ground, hay, fruits, and vegetables. This product can be applied alone or in combination with compatible agricultural chemicals or liquid fertilizers including those containing 100% orthophosphate.

FEATURES

• Prevents or cures boron deficiency in plants.
• Ideal for row crops, turf, sod, ornamental shrubs, trees, and gardens.
• Makes boron immediately more available to plants versus any other leading brand.
• Cuts down on frequent application; saves time and money.
• Eco-friendly and qualifies for all horticultural farming applications.
• Easily diluted and will not clog sprayer or nozzle.
• Can be made with higher concentrations in aqueous solutions.
• Contains less salt than most liquid boron products.

BENEFITS

• Supports native soil organisms and beneficial microbes.
• Supports beneficial microbes in the soil.
• Changes cation exchange capacity (CEC).
• Helps condition the soil for improved plant performance and vigor.

EASE OF USE

• Fast-acting liquid form and maximum absorbency.
• 100% water soluble.
• Can be applied through irrigation systems or fertigated through sprinkler systems.
• Can be mixed with various liquid fertilizers formulations.
• Easy to handle and tank mix for foliar application.

DIRECTIONS FOR USE

Dilution rates may vary depending on the crops or the plants. Soil test may be necessary to determine true boron deficiency for selecting correct amount of application. Below is a suggested application rate.

Seed Furrow (Broadcast): Apply 1–2 pints per acre before planting and incorporate into the upper 3-5 inches of soil.

Band or Strip-Till: Apply 1–2 pints per acre with water or liquid fertilizer carrier placed beside and/or below the seed furrow.

Foliar Application: For best results use the lowest possible volume for thorough coverage and a small droplet size.

Ground Equipment: Mix 1–2 pints 10–15 gallons of water per acre and spray onto the crop foliage. For orchards and other tree crops use at least 100 gallons of water per acre.

Spray Equipment: Mix with a minimum of 10 gallons of water per acre.

Orchards and other tree crops: Use at least 15 gallons per acre of water.

For Root Feeding Trees & Shrubs: mix 4 oz per inch of trunk diameter with 5–10 gal of water and pour or inject into the drip line. Use 1 gal per 64 gal of water for foliar applications.

Corrective Use: Mix 1–2 quarts of liquid Boron 5% EDTA Chelate for plants with 15–20 gal of water to cover one acre for turf application.

For Lawn & Turf: 2–4 pints to cover 10,000 sq ft

For Home Landscape & Gardens: 1–2 fl oz per gallon to cover 1,000 sq ft.

For Row Crops like Corn, Beans, Milo, Wheat, Alfalfa, Sorghum: Use 1–3 quarts per acre with 15–20 gal of water based on soil tests.

These products may be used on many different crops. Rate information provided is a range and not specific to one crop.

For a customized application rate, please contact your EST representative.

WARNING: This fertilizer carries added Boron and is intended for use only on directed crops. Its use on other crops or under conditions other than those recommended may result in serious crop injury.

Net Weight: 8.9 lbs./gal (4.2 kg)

Note: For more specific application rate per acre, please contact your distributor for details. Application rates may vary based on type of soil, soil condition, climate, and seed type.

Note: Works on both Non-GMO and GMO plant and seed genetics.

Cal Foliar is a 100% water-soluble, macromolecular, nano-enhanced, clear liquid solution with an 14%-concentrated calcium chelate solution. As water quality declines due to heavy salt and mineral compaction that increases soil salinity, crops can experience severe calcium-deficiency injury and reduced yields. Cal Foliar is a cost-effective and easy-to-use solution for dealing with calcium deficiency. It is designed especially for foliar application on various row crops, vegetables, fruits, gardens, turf, and lawns.

FEATURES

• Designed to apply foliar.
• Calcium builds quality by neutralizing organic acids in the plants, enabling nutrients and water to enter more freely.

BENEFITS

• When nitrogen, phosphorus, carbon, & calcium are delivered to the plant it will help synthesize proteins, vitamins, and other building blocks needed to construct plant life.
• Increases protein and vitamin levels in plants and vegetables.
• Calcium is also part of the makeup of enzymes and aids in protein synthesis and cell division.
• Chelated Calcium is more available than normal un-chelated calcium.
• Chelated calcium provided an extra source of nutrition once it delivers the calcium ion. EDTA chelates will chelate the calcium but will also lock in another element once it delivers the Ca ion.

EASE OF USE

• Fast-acting and 100% water soluble.
• Easy to handle and tank mix.
• Economical, with low application rates.
• Can be applied through irrigation systems.
• Can be applied with drip irrigation system.
• Can be applied in-ground or side dressed.
• Designed to be used by itself or mixed with various other NPK fertilizer formulations.
• Can be mixed with various liquid fertilizers formulations and herbicides.

DIRECTIONS

Recommended Use Rate

Mix 32 fl oz to 1 gal Cal Foliar per 12‒15 gallons of water, per acre. Mix well and spray evenly.

Cal Foliar can be premixed with water, various liquid fertilizers, or micronutrients before application.

For specific application rates for your crops, consult your dealer for details. For mixing with other fertilizers and proper foliar application, please contact your dealer or supplier.

Product is designed to be used on various row crops, turf, lawn, and vegetable gardens. Works on both Non-GMO and GMO plant and seed genetics.

Note:

PRODUCT BENEFITS

• Designed to apply foliar.
• Cal Mag builds quality by neutralizing organic acids in the plants, enabling nutrients and water to enter more freely.
• Can correct or prevent Calcium or Magnesium deficiencies in plants.

NUTRIENTS’ BENEFITS

• When nitrogen, phosphorus, carbon, & Calcium are delivered to the plant it will help synthesize proteins, vitamins, and other building blocks needed to construct plant life.
• Increases protein and vitamin levels in plants and vegetables.
• Calcium is also part of the makeup of enzymes and aids in protein synthesis and cell division.
• Chelated Calcium and Chelated Magnesium is more available than normal un-chelated Calcium.
• Chelated Calcium provided an extra source of nutrition once it delivers the Calcium ion. EDTA chelates will chelate the Calcium but will also lock in another element once it delivers the Ca ion.

APPLICATION OPTIONS

Directions for use: Apply as directed. Shake well before using.

Mix 32 fl oz to 1 gal Micro Pack Cal Mag per 12‒15 gallons of water, per acre. Mix well and spray evenly.

For mixing with other fertilizers and proper in furrow application, please contact your dealer or supplier.

For specific application rates for your crops, consult your dealer for details.

Note: For more specific application rate per acre, please contact your distributor for details. Application rates may vary based on type of soil, soil condition, climate, and seed type.

BIOAVAILABLE MICRONUTRIENT MANAGEMENT PROGRAMS

CannaVigor is a nano-enhanced, low-sodium, bioactive, natural, Cannabis micronutrient program designed for all indoor greenhouse and outdoor Cannabis crops. The quality of Cannabis produced depends on the genetic quality of the Cannabis seeds. CannaVigor supports and augments this inherent quality of cannabis production. These bioactive glucose sugars work in conjunction with minerals, various micronutrients, and water uptake by plant roots allowing them to perform a variety of different chemical reactions to produce raw materials (food source).

CANNABIS―GROWTH CYCLE AND PLANT STAGES

1. Seeding stage
2. Germination stage.
3. Seedling stage.
4. Vegetative stage.
5. Flowering stage.
6. Bud Maturation Stage
7. Harvesting stage (indoor and outdoor).

Benefits using CannaVigor

• Helps with production of CBD CBN flavonoids and cannabinoids in the plant.
• Increases soil nutrition and plant nutrition uptake for better plant performance and vigor.
• Optimizes soil and nutrient conditions for root growth, plant growth, and seed germination.
• Optimizes conditions for resistance of and tolerance to abiotic stress.
• Promotes rapid nutrient uptake through the root system.
• Increases organic matter in the soil.
• Supports beneficial microbes in the soil.
• Requires less fertilizer and cyclic watering.

PRODUCT FEATURES

• Eco-friendly and VOC free.
• Contains bio-active minerals.
• Nano-enhanced with microbes for faster and deeper penetration of plant nutrients.
• Low sodium product.
• pH balanced and fused with water conditioner.

APPLICATION

Soil pH

Soil pH is very important when growing healthier Cannabis crops and must be checked before planting. Soil pH is important for the speed and efficiency at which different nutrients are absorbed by plants.

Optimal pH Ranges for Soil and Hydroponics Growth
Location	pH Range
Indoor, controlled environment	5.5‒6.5
Outdoor, open field	5.8‒6.5

Use Soil Revitalizer and pH Max (Well Water pH Adjuster) to correct the soil pH before planting.

General Recommendation: Use 16‒32 fl oz per 100 gal of water.

Watering and Feeding Schedule

It is very important to maintain timely watering and feeding schedule during indoor and outdoor growing plants. Please follow your crop consultant or agronomist who specializes in Cannabis crop growing feeding and watering schedule. Please see attached addendum with a generalized feeding schedule for the season.

A. Indoor Drip Irrigation: Temperature and Humidity

Substrate

When growing indoors, the air temperature in the growing room must remain between 68°F‒77°F (20°C‒25°C) while the substrate should be close to 64°F (18°C). Humidity must be maintained between 50%-70% from planting to harvest for optimum growth.

Hydroponic system or Water-Grown Plants

1. Seedling stage

Water temperature is to be maintained at 68°F‒72°F (20°C‒22°C). Add 20 fl oz of CannaVigor to 100 gal of water to feed plant during each watering cycle from seeding to harvest. Do not overwater plants or drown roots.

2. Germination stage

When plants germinate and start sprouting, mix 8‒10 fl oz of CannaVigor with 10‒15 gal of water application. This application can be made once every 5‒8 days until plants begin leafing process. Use this mix to cover 100‒125 plants.

3. Vegetative Stage: Leafing Process

With initiation of the leafing process, mix 12‒16 fl oz of CannaVigor with 15‒20 gal of water for application. This spray application can be made once every 5‒7 days until plants begin the flowering process. Use this mix to cover 100‒125 plants.

4. Flowering: Budding Process

When plants begin flowering and budding at the start of maturation, mix 10‒14 fl oz of CannaVigor with 10‒15 gal of water each application. This application can be made once every 5‒7 days until the flowers/buds begin to mature, continuing until harvest. Use this mix to cover 100‒125 plants.

5. Continue Until Harvest

Continue to use the product as need until harvest based on maturity cycle, strain, and seed specifics.

For Indoor drip irrigation:

In addition to the program above, For each watering use 28 fl oz of Brix Up Liquid Brown Sugar, 12 fl oz of Soil Zyme, and 8 fl oz of pH Max per 100 gallons of water.

Note: this product can be foliar applied if needed, please consult your dealer for more details.

B. Outdoor cultivation in Fields

1. Seedling stage

Soil temperature should remain 55°F (13°C) and above during seeding and planting.

In-furrow Application: During or before planting and seeding, mix the products indicted in the chart below with 10‒15 gal of water per acre.

PRODUCT	VOLUME PER ACRE
LSN 32-0-0	3 gal
Brix Up Liquid Brown Sugar	16 fl oz
Soil Revitalizer	16 fl oz

2. Germination stage: Foliar application

Upon germination and sprouting, mix 16‒24 fl oz of CannaVigor with 10-15 gal of water for a spray application. This spray application can be made once every 10‒12 days till plants begin the leafing process. This mix covers 150‒200 plants (approximate coverage per one acre).

3. Vegetative Stage: Leafing Process

With initiation of the leafing process, mix 24‒32 fl oz of CannaVigor with 15‒20 gal of water for spray/mist application. This application can be made once every 10‒12 days till plants begin the flowering process. Use this mix to cover 150‒200 plants (approximate coverage per one acre).

4. Flowering: Budding Process

When plants begin flowering and budding at the start of maturation, mix 24‒32 fl oz of CannaVigor with 10‒15 gal of water for spray/mist application. These applications can be made once every 7‒10 days until the flowers/buds begin to mature and continuing to harvest. Use this mix to cover 150‒200 plants (approximate coverage per one acre). At the end of the flowering period, bottom leaves will turn yellow. This is normal; there is no lack of nutrients.

ADDITIONAL Application of Brix Up Liquid Brown Sugar

To improve leaves and bud formation.

During vegetative and flowering phases, mix 16 fl oz of Brix Up Liquid Brown Sugar with 10‒15 gal of water per acre. Apply once per feeding cycle during flowering and budding stages.

Weed Management

For better weed management, use Enviro Science Technologies Inc. Nano Excel 3.0 Adjuvant premixed with recommended herbicide for better performance.

Use 6‒10 fl oz of Nano Excel 3.0 Adjuvant. Premix with 32‒44 fl oz recommended herbicide with 10‒15 gal of water. Apply in between rows during outdoor growing season as weeds begin to emerge. This application must be applied manually while protecting surrounding crops from overspray. Apply as needed.

Note: For better performance and results, please contact your dealer or supplier for proper dosage and application guideline for your specific soil type and seeds.

Copper deficiency can result in delayed flowering, maturity, and sterility. Some plants that need more copper than other plants, including beets, onions, lettuce, spinach, and tomatoes. As organic matter increases, available copper decreases. In soils with a pH above 7.5, plant analysis is used to check for copper deficiency. Chelated copper is usually added when another fertilizer is being applied. EST Inc. recommends using only one-sixth the amount of recommended copper when Copper Chelate with Humic is used. If a copper deficiency is confirmed, applications are good for two to three years, depending on the soil and crop. Apply once per year to counteract the copper deficiency. Soil should be tested prior to applying copper.

Liquid Humic increases the absorption rate of copper. It also makes the chelated copper readily available for foliar and root absorption. This product can be mixed with other fertilizers before application.

COMPATIBILITY

Chelated Copper is compatible with most NPK liquid fertilizer blends like, LSN 32-0-0, LSN 28-0-0, Liquid Potash Concentrate, and ammonium phosphate based starter blends. Always pre-mix with water before applying.

USE RATE

Note: Soil test is required prior to application of this product. Use rate needs to be determined based on soil test and type of crop that is going to be planted. Mix with 8–10 gallons of water per acre.

 

COPPER DEFICIENCY RANGE	APPLICATION/ACRE/YEAR
High Deficiency	1–3 Quart
Mid Deficiency	1–2 Quart
Low Deficiency	28 fl oz – 1 Quart

Text Goes Here

Corn Boost was formulated for easy mixing, even distribution and consistent, uniform delivery of secondary and micronutrients to each plant. It provides a synergistic comprehensive and plant-available blend to complement a liquid NPK fertilizer program.

BENEFITS

• Supports native soil organisms and beneficial microbes.
• Increases metabolic activity of soil microorganisms
• Changes cation exchange capacity (CEC).
• Enhances plant nutrient availability and uptake by biodegradation of organic matter.
• Increases soil nutrition and plant nutrition uptake for better plant performance and vigor.
• Promotes rapid nutrient uptake through the root system.

APPLICATION OPTIONS

• Apply Corn Boost at 2–3 quarts with 10–15 gallons of water per acre with NPK in furrow or 2 x 2 at planting
• Apply 2–3 quarts Corn Boost per acre with 10–15 gallons of water as a foliar between 6 and 12 leaf stages.
• Corn Boost can be applied with 1st or 3rd pass of a compatible fungicide.
• Apply 3–4 quarts Corn Boost per acre with NPK in furrow or 2 x 2 at planting and 1–2 quarts Micro Mix per acre as a foliar between 6‒12 leaf stage with 10–15 gallons of water.

Note: For more specific application rate per acre, please contact your distributor for details. Application rates may vary based on type of soil, climate, and seed type.

Note:

Cotton Boost was formulated for easy mixing, even distribution and consistent, uniform delivery of secondary and micronutrients to each plant. It provides a synergistic comprehensive and plant-available blend to complement a liquid NPK fertilizer program.

BENEFITS

• Supports native soil organisms and beneficial microbes.
• Increases metabolic activity of soil microorganisms
• Changes cation exchange capacity (CEC).
• Enhances plant nutrient availability and uptake by biodegradation of organic matter.
• Increases soil nutrition and plant nutrition uptake for better plant performance and vigor.
• Promotes rapid nutrient uptake through the root system.

APPLICATION OPTIONS

• Apply Cotton Boost at 2–3 quarts with 10–15 gallons of water per acre with NPK in furrow or 2 x 2 at planting
• Apply 2–3 quarts Cotton Boost per acre with 10–15 gallons of water as a foliar between 6 and 12 leaf stages.
• Cotton Boost can be applied with 1st or 3rd pass of a compatible fungicide.
• Apply 3–4 quarts Cotton Boost per acre with NPK in furrow or 2 x 2 at planting and 1–2 quarts Micro Mix per acre as a foliar between 6‒12 leaf stage with 10–15 gallons of water.

Note: For more specific application rate per acre, please contact your distributor for details. Application rates may vary based on type of soil, climate, and seed type.

Note:

Dormant Calcium is a 100% water-soluble, and bio-available, concentrated calcium sulfate solution. This product is designed to use in or on ground prior to planting or during fall after harvest.

Dormant Calcium helps regulate soil pH levels throughout the growing seasons, depending on starting soil pH.

Dormant Calcium can be premixed with water, various liquid fertilizers, or micronutrients before application.

BENEFITS

• Designed for building soil condition and soil structure.
• Calcium builds quality by neutralizing organic acids in the plants, enabling nutrients and water to enter more freely.

CALCIUM PROVIDES

• When nitrogen, phosphorus, carbon, & calcium are delivered to the plant it will help synthesize proteins, vitamins, and other building blocks needed to construct plant life.
• Increases protein and vitamin levels in plants and vegetables.
• Calcium is also part of the makeup of enzymes and aids in protein synthesis and cell division.
• Calcium is essential for soil organisms including nitrogen-fixing bacteria.
• Chelated Calcium is more available than normal un-chelated calcium.
• Chelated calcium provided an extra source of nutrition once it delivers the calcium ion. EDTA chelates will chelate the calcium but will also lock in another element once it delivers the calcium ion.

FEATURES

• Fast-acting and maximum absorbency.
• 100% water soluble and bio-available.
• Helps raise and maintain pH close to normal/neutral based on soil type and region.
• Non-hazardous, eco-friendly, and VOC-compliant.
• Can be applied through irrigation systems.
• Can be mixed with various liquid fertilizers formulations and herbicides.
• Easy to handle and tank mix.
• Economical, with low application rates.
• Changes soil cation exchange capacity (CEC).

In addition to providing calcium for plant nutrition and sodium displacement, Dormant Calcium is a valuable source of salt-free chloride fertilization. It helps condition the soil for improved plant performance and vigor in crops such as wheat, barley, corn, beans, potatoes, vegetables, melons, and rice which suffer from severe calcium deficiency due to compactions. As calcium depletes from the soil matrix due to heavy salt and other mineral compaction from increasing salinity and heavy use of salt-based fertilizers and herbicides, crops can experience severe calcium-deficiency injury with reduced yields. Correcting calcium deficiencies can help maximize crop yield and profits in a cost-effective and easy-to-use solution.

DIRECTIONS

General Recommended Use Rate:

For corrective pH dosage before planting:

Ground should be shallow-tilled 4–8 inches before applying this product.

Soil pH must be determined before application. Consult your distributor or supplier for a customized and tailored application rate of this product based on soil pH and condition.

For soil pH <3: Use 1–2 gallons per acre with 10–15 gallons of water.

For soil pH 3–5: Use 2–4 quarts per acre with 10–15 gallons of water.

For soil pH 5–6.0: Use 1–2 quarts per acre with 10–15 gallons of water.

For complex and compacted soil with very-low pH, Dormant Calcium can be foliar applied as needed to maintain soil pH during growing cycle. Use rate: 16–32 fl oz per acre with 10–15 gallons of water. Use as often as needed.

For Row Crops this Product can be side-dressed during the growing cycle to maintain the soil pH. Use rate: 1–2 quarts per acre with 10–15 gallons of water. Use as often as needed.

For calcium supplementation:

Mix 1–2 quarts of Dormant Calcium per 12‒15 gallons of water per acre.

Mix well with water before application.

For specific application rate for your crops, consult your dealer for details.

Product is designed to use on various row crops, turf, lawn, and vegetable gardens. Works on both Non-GMO and GMO plant and seed genetics.

Note:

BIOAVAILABLE MICRONUTRIENT MANAGEMENT PROGRAMS

Hemp Boost is a nano-enhanced, low-sodium, bioactive, natural, Hemp micronutrient program designed for all indoor greenhouse and outdoor Hemp crops. The quality of Hemp produced depends on the genetic quality of the Hemp seeds. Hemp Boost supports and augments this inherent quality of Hemp production. These bioactive glucose sugars work in conjunction with minerals, various micronutrients, and water uptake by plant roots allowing them to perform a variety of different chemical reactions to produce raw materials (food source) and utilization of micronutrients.

Hemp―growth cycle and plant stages

1. Seeding stage
2. Germination stage.
3. Seedling stage.
4. Vegetative stage.
5. Flowering stage.
6. Bud Maturation Stage
7. Harvesting stage (indoor and outdoor).

Benefits using Hemp Boost

• Helps with production of CBD flavonoids and cannabinoids in the plant.
• Increases soil nutrition and plant nutrition uptake for better plant performance and vigor.
• Optimizes soil and nutrient conditions for root growth, plant growth, and seed germination.
• Optimizes conditions for resistance of and tolerance to abiotic stress.
• Promotes rapid nutrient uptake through the root system.
• Increases organic matter in the soil.
• Supports beneficial microbes in the soil.
• Requires less fertilizer and cyclic watering.

PRODUCT FEATURES

• Eco-friendly and VOC free.
• Contains bio-active minerals.
• Nano-enhanced with microbes for faster and deeper penetration of plant nutrients.
• Low -sodium Product
• pH balanced and fused with water conditioner.

APPLICATION

Soil pH

Soil pH is very important when growing healthier Hemp crops and must be checked before planting. Soil pH is important for the speed and efficiency at which different nutrients are absorbed by plants.

Optimal pH Ranges for Soil and Hydroponics Growth
Location	pH Range
Indoor, controlled environment	5.5‒6.5
Outdoor, open field	5.8‒6.5

Use Soil Revitalizer and pH Max (Well Water pH Adjuster) to correct the soil pH before planting.

General Recommendation: Use 16‒32 fl oz per 100 gal of water.

Watering and Feeding Schedule

It is very important to maintain timely watering and feeding schedule during indoor and outdoor growing plants. Please follow your crop consultant or agronomist who specializes in Hemp crop growing feeding and watering schedule. Please see attached addendum with a generalized feeding schedule for the season.

1. Indoor Temperature and Humidity

Substrate

When growing indoors, the air temperature in the growing room must remain between 68°F‒77°F (20°C‒25°C) while the substrate should be close to 64°F (18°C). Humidity must be maintained between 50%-70% from planting to harvest for optimum growth.

Hydroponic system or Water-Grown Plants

1. Seedling stage

Water temperature is to be maintained at 68°F‒72°F (20°C‒22°C). Add 20 fl oz of Hemp Boost to 100 gal of water to feed plant during each watering cycle from seeding to harvest. Do not overwater plants or drown roots.

2. Germination stage

When plants germinate and start sprouting, mix 8‒10 fl oz of Hemp Boost with 10‒15 gal of water for a spray application. This spray/mist application can be made once every 5‒8 days until plants begin leafing process. Use this mix to cover 100‒125 plants.

3. Vegetative Stage: Leafing Process

With initiation of the leafing process, mix 12‒16 fl oz of Hemp Boost with 15‒20 gal of water for a spray/mist application. This spray application can be made once every 5‒7 days until plants begin the flowering process. Use this mix to cover 100‒125 plants.

4. Flowering: Budding Process

When plants begin flowering and budding at the start of maturation, mix 10‒14 fl oz of Hemp Boost with 10‒15 gal of water for a spray/mist application. This spray application can be made once every 5‒7 days until the flowers/buds begin to mature, continuing until harvest. Use this mix to cover 100‒125 plants.

For Indoor drip irrigation:

In addition to the program above, For each watering use 28 fl oz of Brix Up Liquid Brown Sugar, 12 fl oz of Intelli Soil Zyme, and 8 fl oz of pH Max per 100 gallons of water.

1. Outdoor cultivation in Fields
2. Seedling stage

Soil temperature should remain 55°F (13°C) and above during seeding and planting.

In-furrow Application: During or before planting and seeding, mix the products indicted in the chart below with 10‒15 gal of water per acre.

PRODUCT	VOLUME PER ACRE
LSN 32-0-0	3 gal
Brix Up Liquid Brown Sugar	16 fl oz
Soil Revitalizer	16 fl oz

2. Germination stage: Foliar application

Upon germination and sprouting, mix 16‒24 fl oz of Hemp Boost with 10-15 gal of water for a spray application. This spray application can be made once every 10‒12 days till plants begin the leafing process. This mix covers 150‒200 plants (approximate coverage per one acre).

3. Vegetative Stage: Leafing Process

With initiation of the leafing process, mix 24‒32 fl oz of Hemp Boost with 15‒20 gal of water for spray/mist application. This application can be made once every 10‒12 days till plants begin the flowering process. Use this mix to cover 150‒200 plants (approximate coverage per one acre).

4. Flowering: Budding Process

When plants begin flowering and budding at the start of maturation, mix 24‒32 fl oz of Hemp Boost with 10‒15 gal of water for spray/mist application. These applications can be made once every 7‒10 days until the flowers/buds begin to mature and continuing to harvest. Use this mix to cover 150‒200 plants (approximate coverage per one acre). At the end of the flowering period, bottom leaves will turn yellow. This is normal; there is no lack of nutrients.

ADDITIONAL Application of Brix Up Liquid Brown Sugar

To improve leaves and buds formation.

Mix 16 fl oz of Brix Up Liquid Brown Sugar with 10‒15 gal of water per acre. Apply during vegetative, flowering, and budding stages when necessary.

Weed Management

For better weed management, use Enviro Science Technologies Inc. Nano Excel 3.0 Adjuvant premixed with recommended herbicide for better performance.

Use 6‒10 fl oz of Nano Excel-3.0 Adjuvant. Premix with 32‒44 fl oz recommended herbicide with 10‒15 gal of water. Apply in between rows during outdoor growing season as weeds begin to emerge. This application must be applied manually while protecting surrounding crops from overspray. Apply as needed.

Note: For better performance and results, please contact your dealer or supplier for proper dosage and application guideline for your specific soil type and seeds.

Note: This product contains Boron (B). the use of the fertilizer material on any crops other than those recommended may result in serious injury to the crop(s). Note: For more specific application rate per acre, please contact your distributor for details. Application rates may vary based on type of soil, soil condition, climate, and seed type.

Manganese is one of the 16 essential elements mandatory for plant growth and reproduction. Manganese (Mn) is considered a micro-nutrient because plants required in small amounts irrespective to its relative abundance in soils or its importance as a plant nutrient. Relatively large quantities of MnSO₄ can occur in soils, but only a small fraction is normally available at any one time. This product is designed for use on corn, soybeans, sorghum, cotton, sugar beets, wheat, and other field crops with a medium to high response to manganese.

BENEFITS AND FUNCTION

Micro-nutrient Manganese Chelate is a first choice when applied as a foliar spray.

Facts

Manganese (Mn) is an important plant micronutrient and is required by plants in the second greatest quantity compared to iron. Like any other element, it can have a limiting factor on plant growth if it is deficient or toxic in plant tissue. Like iron in many ways, manganese deficiency or toxicity is often mistaken for iron deficiency or toxicity.

Function

Deficiency

Manganese deficiency symptoms, which often look like those of iron deficiency, appear as interveinal chlorosis (yellow leaves with green veins) on young leaves, and sometimes tan, sunken spots appearing in chlorotic areas between the veins. Plant growth may also be reduced and stunted. Manganese deficiency can occur when the pH of the growing medium exceeds 6.5, because it is tied up and unavailable for uptake. Deficiency can also occur from low fertilizer application rates, use of general purpose fertilizers with high salt content (which typically have reduced micronutrient contents), excessive leaching, or applying too many iron chelate drenches.

MIXING INSTRUCTIONS

MIXING WITH UAN AND OTHER LIQUID FERTILIZER SOLUTIONS

Manganese Chelate may be mixed in any ratio with 28% or 32% low salt urea ammonium nitrate (UAN) solutions.

MIXING WITH NPK SOLUTIONS

Generally, no more than 1–2 quarts of liquid Manganese Chelate should be added to 10 gallons of clear liquid-mixed fertilizers such as 9-18-9, 14-36-12, or 8-16-8. Manganese Chelate can be applied by itself or diluted with water. It is not recommended to be applied directly to or with seed. Always check compatibility with other products prior to use. Do not mix with liquid fertilizers high in orthophosphate or high salt base liquid fertilizers.

APPLICATION GUIDE CHART

 

TEST RANGE	PLANT CONDITION	STARTER	BROADCAST
Extremely Low	Severe Deficiency	2 to 3 Quarts	3 to 4 Quarts
Low	Mild Deficiency	1 to 2 Quarts	2 to 3 Quarts
Medium	Slight Deficiency	1 Quart	1 to 1 ½ Quarts
High	Maintenance Only	1 Pint	1 Pint

USE RATE

Mix Manganese Chelate thoroughly with 10–15 gallons of water per acre.

Rice Boost was formulated for easy mixing, even distribution and consistent, uniform delivery of secondary and micronutrients to each plant. It provides a synergistic comprehensive and plant-available blend to complement a liquid NPK fertilizer program. Rice-Boost, liquid rice fertilizer is a low-sodium, containing micronutrient chelates as liquid fertilizer formulated for application in-furrow during rice planting for maximum efficiency and promotion of deep root growth.

BENEFITS

• Supports native soil organisms and beneficial microbes.
• Increases metabolic activity of soil microorganisms
• Changes cation exchange capacity (CEC).
• Enhances plant nutrient availability and uptake by biodegradation of organic matter.
• Increases soil nutrition and plant nutrition uptake for better plant performance and vigor.
• Promotes rapid nutrient uptake through the root system.

APPLICATION OPTIONS

Apply 2‒4 quarts per acre with or without nitrogen during planting. Premix with 5‒15 gallons of water.

Apply 36‒64 fl oz Rice Boost per acre as a foliar application 1 to 2 times per growing season in 10-15 gallons of water.

Rice Boost may be applied with a compatible fungicide or herbicide.

Note: For more specific application rate per acre, please contact your distributor for details. Application rates may vary based on type of soil, climate, and seed type.

Note:

Wheat, Barley, & Oat Boost was formulated for easy mixing, even distribution and consistent, uniform delivery of secondary and micronutrients to each plant. It provides a synergistic comprehensive and plant-available blend to complement a liquid NPK fertilizer program.

BENEFITS

• Supports native soil organisms and beneficial microbes.
• Increases metabolic activity of soil microorganisms
• Changes cation exchange capacity (CEC).
• Enhances plant nutrient availability and uptake by biodegradation of organic matter.
• Increases soil nutrition and plant nutrition uptake for better plant performance and vigor.
• Promotes rapid nutrient uptake through the root system.

Guaranteed Analysis

Calcium (Ca) 1.70% – Chelated Calcium (Ca)	1.70%
Magnesium (Mg) 0.35% – Chelated Magnesium (Mg)	0.35%
Boron (B)	0.10%
Copper (Cu) 0.25% – Chelated Copper (Cu)	0.25%
Iron (Fe) 1.80% – Chelated Iron (Fe)	1.80%
Manganese (Mn) 0.50% – Chelated Manganese (Mn)	0.50%
Zinc (Zn) 2.30% – Chelated Zinc (Zn)	2.30%

Derived from: Calcium Sulfate EDTA, Magnesium Sulfate EDTA, Sodium Borate, Copper Sulfate EDTA, Iron Sulfate HEDTA, Manganese Sulfate EDTA and Zinc Sulfate EDTA. Chelating Agent: Ethylenediaminetetraacetic Acid

ALSO CONTAINS NONPLANT FOOD INGREDIENTS

5.50%	Liquid Sugar Cane Extract (Microbe food)
0.10%	Humic Acid (Derived from Leonardite)

NOTICE: This product contains Boron (B). the use of the fertilizer material on any crops other than those recommended may result in serious injury to the crop(s).

Note:

APPLICATION OPTIONS

Recommended Rates and Placement

Use 2–3 gallons per acre of Wheat-Boost depending on the analysis. It can be placed in the seed furrow or side dressed near the row. Use lower rates for grain production. Use higher rates for fall/winter/spring and grazing programs for quicker growth.

Foliar Application

Use Wheat, Barley, & Oat Boost Liquid Fertilizer to supplement soil-applied nutrients or to correct nutrient deficiencies. In foliar application, use ½ gal– 1 gal per acre pre-mixed with 10‒15 gal of water.

Timely application for Wheat

Early spring foliar programs that include nitrogen promote an increase in headset. Later applications, during early boot stage, aid in filling out developing heads.

• 1st Foliar: 3‒4 gal/acre at or just before tillering.
• 2nd Foliar: 2‒3 gal/acre two weeks after 1st application.
• 3rd Foliar: 2‒3 gal/acre at boot stage.

Note: For specific application rates based on your region and soil type and seed type please consult your distributor for customize application rate per growing cycle. Application rates may vary based on type of soil, climate, and seed type.

Zinc (Zn) is an essential micronutrient critical for proper growth and development in plants; Zinc is also a necessary micronutrient for proper plant growth, size, and maturity. Zinc helps the production of chlorophyll, protein, and various enzymes involved in metabolic reactions for proper growth.

FEATURES & BENEFITS

Zinc Chelate is specially designed to balance and fix zinc deficiency in plants and soil. Smaller than normal leaves and stunted growth are indicators of inadequate zinc. In addition to possible zinc deficiencies in soils with a pH above 7.3, zinc is located near the surface of the soil. If topsoil has been removed, land has been terraced or soils are sandy and free draining, plants might need more zinc. Zinc Chelate is a first choice when applied as a foliar spray.

Micronutrient Chelated Liquid Zinc can be applied directly to the soil or by foliar application. Can be used for lawn, grass, turf, corn, soybeans, other row crops, alfalfa, pasture ground, hay, fruits, and vegetables. This product can be applied alone or in combination with compatible agricultural chemicals or liquid fertilizers including those containing 100% orthophosphate. Its molecules penetrate and absorb deeper in leaves and soil particles faster than traditional zinc supplementation.

FEATURES

• Prevents or cures zinc deficiency in plants.
• Minimizes leaf discoloration and chlorosis
• Ideal for row crops, turf, sod, ornamental shrubs, trees, and gardens.
• Makes zinc immediately more available to plants.
• Cuts down on frequent application; saves time and money.
• Eco-friendly and qualifies for all horticultural farming applications.
• Easily diluted and will not clog sprayer or nozzle.
• Can be made with higher concentrations in aqueous solutions.
• Contains less salt than most liquid zinc products.

BENEFITS

• Supports native soil organisms and beneficial microbes.
• Increases metabolic activity of soil microorganisms
• Supports beneficial microbes in the soil.
• Changes cation exchange capacity (CEC).
• Helps condition the soil for improved plant performance and vigor.

DIRECTIONS FOR USE

GENERAL RECOMMENDATION

Row Crops like Corn, Beans, Milo, Wheat, Alfalfa, Sorghum: Dilution rates may vary depending on the crops or the plants. Soil test may be necessary to determine true zinc deficiency for selecting correct amount of application. Below is a suggested application rate. Mix Chelated Zinc thoroughly with 10‒15 gallons of water per acre.

General APPLICATION GUIDE CHART

TEST RANGE	PLANT NUTRIENT CONDITION	STARTER		BROADCAST
Extremely Low	Severe Deficiency	2–4 Quarts	3–5 Quarts
Low	Mild Deficiency	1–2 Quarts	2–3 Quarts
Medium	Slight Deficiency	1 Quart	1–1 ½ Quarts
High	Maintenance Only	1 Pint – 1 Quart	1 Pint

 

Seed Furrow (Broadcast): Apply 1–2 pints per acre before planting and incorporate into the upper 3–5 inches of soil.

Band or Strip-Till: Apply 1–2 Quarts per acre with water or liquid fertilizer carrier placed beside and/or below the seed furrow.

Foliar Application: For best results use the lowest possible volume for thorough coverage and a small droplet size.

Ground Equipment: Mix 1–2 Quarts 10–15 gallons of water per acre and spray onto the crop foliage. For orchards and other tree crops use at least 100 gallons of water per acre.

Spray Equipment: Mix 1–2 Quarts Mix with a minimum of 10 gallons of water per acre.

Orchards and other tree crops: Mix 1–2 pints with at least 15 gallons per acre of water.

For Root Feeding Trees & Shrubs: mix 4 oz per inch of trunk diameter with 5–10 gal of water and pour or inject into the drip line. Use 1 gal per 64 gal of water for foliar applications.

Corrective Use: Mix 2–4 quarts of liquid Zinc for plants with 15–20 gal of water to cover one acre for turf application.

For Lawn & Turf: 1–2 pints to cover 10,000 sq ft

For Home Landscape & Gardens: 1–2 fl oz per gallon to cover 1,000 sq ft.

These products may be used on many different crops. Rate information provided is a range and not specific to one crop.

Note: Works on both Non-GMO and GMO plant and seed genetics.

Brix Up Liquid Brown Sugar adds complex carbohydrates in the form of molasses to feed soil microbes. Humic acids may increase micronutrient uptake.

Brix Up Liquid Brown Sugar is registered for sale in California.

BENEFITS

• Contains complex carbohydrates in the form of cane molasses.
• Feeds soil microbes.
• Humic acids may increase micronutrient uptake.

EASE OF USE

• Easy to handle and tank mix.
• Economical, with low application rates.
• Can be applied through irrigation systems.
• Can be applied with drip irrigation system.
• Can be applied in-ground or side dressed.
• Designed to be used by itself or mixed with various other NPK fertilizer formulations.
• Can be mixed with various liquid fertilizers formulations and herbicides.

DIRECTIONS

General recommendation; use 16–32 fl oz per acre, with 10–15 gallons of water. For best results apply 3 times during the growing season. Application should be made directly to the leaf surface in the form of a foliar spray. Mix well before applying.

Soil or Drip irrigation system: use 16–24 fl oz per acre with every feeding cycle.

During seed and planting: use 16–20 fl oz per acre with 10–15 gallons of water.

WELL WATER CONDITIONS

Most well water pH ranges from 8.5‒10.5, depending on the region and underground mineral formations. Some well water shows heavy brine and mineral concentrations due to the depth of well and location and well water pH may show as high as 10.0 and above.

NOTE: Well water also contains various microorganisms, harmful minerals, brine, and other contaminations, of which some are beneficial, and some are harmful for human consumption and agricultural use. Well water must be tested to verify containments before its use. The pH must be adjusted each time before use of well water.

DIRECTIONS

Recommended Dosage: Mix 16 fl oz to 24 fl oz of product with 10–20 gallons of water per acre for drip line, foliar and in furrow applications. Brix Up Liquid Brown Sugar, micronutrients, and other NPK fertilizer products can be tank mixed with this product when applied. For best results apply two to three times during the growing season or as needed. It is always recommended to perform a jar test to ensure compatibility.

DO NOT add this product directly into the well. Add Intelli Aqua Plus should be added to holding tank first; add water and agitate well. DO NOT mix this product directly with herbicides, pesticides, or other fertilizers and chemical products. Test water for compatibility with any additives.

Note: When pumping out well water from the well, pass water through a filtration system to remove all large and fine floating debris before adding Intelli Aqua Plus. A small amount of well water must be pre-tested to determine the pH value prior to adding Intelli Aqua Plus to the larger quantity of pumped well water. Well water hardness and dissolved minerals can affect the dosage requirement of Intelli Aqua Plus. Consult your distributor or supplier for a customized and tailored application rate of this product for your well water condition.

EASE OF USE

• Easy to handle and tank mix.
• Economical, with low application rates.
• Can be applied through irrigation systems.
• Can be applied with drip irrigation system.
• Can be applied in-ground or side dressed.
• Can be mixed with various liquid fertilizers formulations and herbicides.

LSN 32-0-0 is concentrated, and recommended dilution is per application rate. It should be used as a supplement to an existing fertilization program. For best results, application should be made directly to the leaf surface in the form of a foliar spray. Alternatively, the application can be applied directly to the soil. LSN 32-0-0 is registered for sale in California

Benefits

• Supports nutrient uptake
• Supports native soil organisms and beneficial microbes.
• Improves overall plant nutrition.

DIRECTIONS

Apply as directed. Shake well before using.

APPLICATION RATE

Mix 1.5–2 gallons of LSN 32-0-0 with 15–20 gallon of water per acre. Apply as needed throughout growing season.

For best result, application should be applied in a foliar spray directly to the leaf surface to maximize absorption by the plant. Product can be applied through irrigation systems or tank sprayers.

Corn, Beans & Other Row Crops: Use a total of 20–24 gallons per acre during the growing season. Applications can be divided during planting and based on various maturity stages.

Seed Furrow (Broadcast): Apply 3–5 gallons per acre before planting and incorporate into the upper 4–6 inches of soil. Optionally use with 10–15 gallons of water per acre.

Band or Strip-Till: Apply 3–5 gallons per acre, placed beside and/or below the seed furrow. Optionally use with 10–15 gallons of water per acre.

Ground Equipment: Apply 3–5 gallons per acre. Optionally use with 10–15 gallons of water per acre.

Foliar Application: Mix 1.5–2.0 gallons of LSN 32-0-0 per 15–20 gallon of water per acre. Apply as needed throughout growing season.

For Root Feeding Trees & Shrubs: mix 4 oz per inch of trunk diameter with 5–10 gal of water and pour or inject into the drip line. Use 1 gal per 64 gal of water for foliar applications.

For Lawn and Turf: 1–2 pints to cover 10,000 sq ft

These products may be used on many different crops. Rate information provided is a range and not specific to one crop.

For a customized application rate, please contact your EST representative.

Note:

EASE OF USE

• Fast-acting and maximum absorbency.
• 100% water soluble
• Can be applied through irrigation systems or fertigated through sprinkler systems.
• Can be mixed with various liquid fertilizers formulations.
• Easy to handle and tank mix for foliar application.

This nutrient blend is intended for the prevention and/or correction of potassium deficiencies. This product can be applied directly to the soil or by foliar application. It can be applied alone or in combination with compatible agricultural chemicals or liquid fertilizers.

Liquid Potash Concentrate 0-0-15 is a potassium solution, which can be used in foliar application or applied to soil, or side-dress at planting. It can also be applied in combination with other crop production or protection products and presents a low risk of crop injury.

When applied as recommended, Liquid Potash Concentrate 0-0-15 may produce equivalent or better crop response compared to higher rates of conventional potassium fertilizers. Liquid Potash Concentrate 0-0-15 is processed and formulated with macromolecular technology to help increase absorption rate greater than 3–5 times better than any conventional potassium-based products.

Liquid Potash Concentrate 0-0-15 can be used in any cropping situation where potassium is needed, and its unique formula provides increased crop utilization, allowing lower total product application volume to produce and receive the greater results as other conventional potassium fertility products when applied at typical rates.

PRODUCT FEATURES

• Fast absorbing liquid form to increase K uptake.
• Helps correct potassium deficiencies that reduced yield potential.
• Helps enhance micronutrient response.
• Increases energy for plant and growth.

Liquid Potash Concentrate 0-0-15 can provide potassium fertility depending on soil conditions, type of application, and rate. If applied with other crop production or protection products, please consult a representative or your dealer for the best application method to achieve optimal results for your specific crop and soil conditions.

DIRECTIONS

Liquid Potash Concentrate 0-0-15 is the ideal product for supplying potassium to any crops and is applied by broadcast or banded over the top of the seed zone, alongside as in a 2” by 2” spread, as a top-dressing or a side-dress application, as part of a foliar fertility program, or through fertilization.

APPLICATION

Vine, field, vegetable, and tree: Apply Liquid Potash Concentrate 0-0-15 at the rate of 2–4 quarts per acre approximately 3–4 weeks before harvest. Repeat 2–4 quarts per acre at approximately 7–10 days before harvest.

Row Crops: Apply ½ gal to 2 gal per acre depending on type of crop and soil conditions. Soil test is recommended before determining proper dosage requirement for specific crop and soil conditions.

Follow directions carefully. Consult your dealer or supplier for timing and methods of applications, weather, and crop conditions.

EASE OF USE

• 100% water soluble
• Can be applied through irrigation systems or fertigated through sprinkler systems.
• Can be applied in-ground or side dressed.
• Can be mixed with various liquid fertilizers formulations.
• Easy to handle and tank mix.
• Liquid form enhances application and accuracy.

This micronutrient blend is intended for the prevention and/or correction of manganese deficiencies. This product can be applied directly to the soil or by foliar application. It can be applied alone or in combination with compatible liquid fertilizers or other agricultural chemicals. Manganese 5% EDTA Chelate is registered for sale in California.

This product is designed for use on corn, soybeans, sorghum, cotton, sugar beets, wheat, and other field crops with a medium to high response to manganese.

Benefits and Function

Micro-nutrient Manganese Sulfate is a first choice when applied as a foliar spray.

Function

Deficiency

Manganese deficiency symptoms, which often look like those of iron deficiency, appear as interveinal chlorosis (yellow leaves with green veins) on young leaves, and sometimes tan, sunken spots appearing in chlorotic areas between the veins. Plant growth may also be reduced and stunted. Manganese deficiency can occur when the pH of the growing medium exceeds 6.5, because it is tied up and unavailable for uptake. Deficiency can also occur from low fertilizer application rates, use of general purpose fertilizers with high salt content (which typically have reduced micronutrient contents), excessive leaching, or applying too many iron chelate drenches.

MIXING INSTRUCTIONS

MIXING WITH UAN AND OTHER LIQUID FERTILIZER SOLUTIONS

Manganese 5% EDTA Chelate may be mixed in any ratio with 28% or 32% low salt urea ammonium nitrate (UAN) solutions.

MIXING WITH NPK SOLUTIONS

Generally, no more than 1–2 quarts of liquid Manganese 5% EDTA Chelate should be added to 10 gallons of clear liquid-mixed fertilizers such as 9-18-9, 14-36-12, or 8-16-8. Manganese 5% EDTA Chelate can be applied by itself or diluted with water. It is not recommended to be applied directly to or with seed. Always check compatibility with other products prior to use. Do not mix with liquid fertilizers high in orthophosphate or high salt base liquid fertilizers.

APPLICATION GUIDE CHART

TEST RANGE	PLANT CONDITION	STARTER	BROADCAST
Extremely Low	Severe Deficiency	2 to 3 Quarts	3 to 4 Quarts
Low	Mild Deficiency	1 to 2 Quarts	2 to 3 Quarts
Medium	Slight Deficiency	1 Quart	1 to 1 ½ Quarts
High	Maintenance Only	1 Pint	1 Pint

USE RATE

Mix Manganese 5% EDTA Chelate thoroughly with 10–15 gallons of water per acre.

Seed Furrow (Row): Apply 3 to 4 pints per acre during planting with small amount of liquid starter fertilizer or dilute with 3 to 5 gallons per acre of water for uniform application. Seed furrow (row) is intended to supply a starter level of manganese to young seedlings. Apply in early spring or late summer, with two or three applications during the season is recommended. Manganese 5% EDTA Chelate can also be applied in late autumn to jumpstart the following year.

Band: Apply 3 to 5 pints (3.5 to 6.0 pounds) per acre with water or liquid fertilizer.

Foliar Application: For best results use the lowest possible volume for thorough coverage and a small droplet size.

• Ground Equipment: Mix ½ Gallon per acre with 10 to 15 gallons of water per acre and spray onto the crop foliage.
• Air Equipment: Mix ½ Gallon with a minimum of 10 to 15 gallons of water per acre.

IMPORTANT NOTE

Always check compatibility with other products prior to use. Since weather, crops, soil, and other conditions may vary, EST, Inc. and/or the Seller/Distributor make no warranty of any kind, expressed, or implied concerning the use of this product. The user assumes all risk of use of this product storage and handling whether in accordance with directions or suggestions as described.

EASE OF USE

• 100% water soluble
• Can be applied through irrigation systems or fertigated through sprinkler systems.
• Can be applied in-ground or side dressed.
• Can be mixed with various liquid fertilizers formulations.
• Easy to handle and tank mix.

Liquid Brown Sugar for Organic Production adds complex carbohydrates in the form of molasses to feed soil microbes. Humic acids may increase micronutrient uptake.

Liquid Brown Sugar for Organic Product is registered in California as an Organic Input Material. 570271

BENEFITS

• Contains complex carbohydrates in the form of cane molasses.
• Feeds soil microbes.
• Humic acids may increase micronutrient uptake.

DIRECTIONS

General recommendation; use 16–32 fl oz per acre, with 10–15 gallons of water. For best results apply 3 times during the growing season. Application should be made directly to the leaf surface in the form of a foliar spray. Mix well before applying.

Soil or Drip irrigation system: use 16–24 fl oz per acre with every feeding cycle.

During seed and planting: use 16–20 fl oz per acre with 10–15 gallons of water.

Liquid Humic for Organic Production contains humic acid, in an easily mixable form that may help micronutrient uptake for plants.

Liquid Humic for Organic Production is registered in California as an Organic Input Material. 570284

DIRECTIONS

Mix 16‒32 fl oz in a minimum of 10‒15 gallons of water per acre for both foliar and in-furrow application. Application rates and the number of applications necessary will vary with the severity of the soil conditions. Please consult a technical sales representative from EST, Inc. for a custom designed protocol. Once diluted, the product must be used within 24 hours. If soil temperature is below 45°F, performance is significantly reduced. Given the variables to consider, the number of applications prior to achieving desired results might vary.

RECOMMENDATIONS

To ensure compatibility, a jar test or strip test should be conducted before adding to your tank mix. Use in accordance with recommendations of a qualified individual or institution, such as, but not limited to, a certified crop advisor, agronomist, university crop extension publication, or apply according to recommendations in your approved nutrient management plan.

Text Goes Here

Bloom Micromix is specially designed for all types of flowering and budding plants, shrubs, trees and for various fruits and vegetables. Bloom Micromix provides essential minerals and nutrients for flowering budding cycle and can be used throughout the plant growing cycle. Bloom Micromix is concentrated and is recommended to be diluted per the application rate.

Bloom Micromix is formulated for field row crops, vegetable, row, fruit, tree, vine, ornamental and turf crops. Bloom Micromix may be applied through drip systems, aircraft, or via ground sprayers (high-volume or low-volume). This product is compatible with most fertilizers and pesticides; however, a compatibility test is recommended if the desired combination has not been used in the past.

DIRECTIONS

DIRECTION FOR USE

Shake well before using. Always add this product to spray tank before adding a pesticide or additives. Do not mix with dormant oils, surfactant, lime-sulfur and/or highly alkaline spray materials. Check with agronomist to determine proper dosage requirements and application rates for specific type of flowers, and crops.

APPLICATION METHODS

Bloom Micromix can be applied in various ways. Foliar Spray, In-Furrow, Continuous Drip Irrigation, Aerial spray, or used on its own in Home Landscapes and Gardens.

APPLICATION RATES

Foliar Application: Apply 2 to 4 quarts mixed with 10–15 gallons per acre as needed on a 10–14-day schedule.

When rates of over 2 quarts are required, split applications of 2 quarts or less are recommended. Avoid foliar applications of Bloom Micromix when plants are under stress due to lack of moisture and extreme temperature.

Soil Application: For maintenance apply 1–3 quarts mixed with 10–15 gallons per acre. For mild deficiency apply 2–6 quarts mixed with 10–15 gallons per acre.

Home Landscape and Gardens: 4–6 fl oz per gallon of water to cover 1,000 square feet. For best results, apply 3–4 times during the growing (spring, summer, and fall) seasons. Do not mix with any other fertilizer or plant food.

Drip Irrigation for Crop or plants: Use 1–2 quarts per 100 gallons of water for continuous feed rates.

Aerial Application: Apply 1 quart per 5–10 gallons of water per acre. An increased concentrate of 1.5 quarts per acre can be used.

NOTE

If well water is used for this application, always double check the pH of well water before mixing this product. For best results lower well water pH to 5.5 or 6 using pH Max before mixing Bloom Micromix or other products before application.

Works on both Non-GMO and GMO plant and seed genetics.

Note:

Bio Phos Balancer is an all-purpose nutritional supplement for fruits, vegetables, ornamentals, turf, trees, and gardens. Phosphorous is one of the major elements essential for plant growth. Upon foliar application, the phosphorus in Phosphorous Balancer can be taken up directly by the plant leaves.

Works on both Non-GMO and GMO plant and seed genetics.

APPLICATION

Shake or stir well prior to use.

Application rate

Use 28–36 ounces to 15 gallons of water per acre. Rate is based on soil condition and type of crop. A soil test is advisable prior to application. Foliar feed when intended target is 4‒6 inches tall in order to maximize absorption by the plant. Product can be applied through the irrigation systems or tank sprayers. Use in accordance with recommendations of a qualified individual or institution, such as, but not limited to, a certified crop advisor, agronomist, university crop extensions publication, or apply according to recommendations in your approved nutrient management plan.

Note:

Bio Phos Balancer Dark is an all-purpose nutritional supplement for fruits, vegetables, ornamentals, turf, trees, and gardens. Phosphorous is one of the major elements essential for plant growth. Upon foliar application, the phosphorus in Phosphorous Balancer can be taken up directly by the plant leaves.

Works on both Non-GMO and GMO plant and seed genetics.

APPLICATION

Shake or stir well prior to use.

Application rate

Use 28–36 ounces to 15 gallons of water per acre. Rate is based on soil condition and type of crop. A soil test is advisable prior to application. Foliar feed when intended target is 4‒6 inches tall in order to maximize absorption by the plant. Product can be applied through the irrigation systems or tank sprayers. Use in accordance with recommendations of a qualified individual or institution, such as, but not limited to, a certified crop advisor, agronomist, university crop extensions publication, or apply according to recommendations in your approved nutrient management plan.

Note:

Benefits and Advantages

• Works with Wine grapes, edible grapes, white, purple, red and black grape varieties.
• Optimal absorption of nutrients through the soil, roots, or the leaves.
• Rapid nutrient availability for plants through effective, highly complex compounds.
• Matched nutrient combinations available for all types of different grape plant species.
• A very low-sodium and highly-effective, concentrated fertilizer.
• Nano-enhanced technology designed for rapid application absorption to soil, roots, and leaves.
• Herbicide compatible. Check with your dealer or distributor for proper mixing instructions.

Note:

Works on both Non-GMO and GMO plant and various grape seed genetics.

APPLICATION

IN FURROW: Application Rate Gallon per Acre Fertilizer Stage

Premix with 10–15 gal of water before applying this product. Use Enviro Science Technologies Inc.’s pH Max to adjust water pH to 6–6.5 before tank mixing this product. Use 2–4 fl oz of pH Max every 10–15 gal of water.

• Bud Break: 1–1.5 gallons per acre.
• Full Bloom: 1–1.5 gallons per acre.
• Version: 1–2 gallons per acre.
• Pre-harvest: 1–1.5 gallons per acre.

The following recommendations assume soil levels of P and K are at adequate levels according to university standards as determined by soil and tissue tests. We DO NOT recommend trying to supply all crop P and K demands through a drip system.

For Initial Transplanting and 1^st and 2^nd stage applications.

DRIP SYSTEMS APPLICATION RATES: Gallon per Acre Fertilizer Stage

• ½ –1 gallons per acre, Pre-bloom.
• 1–1.5 gallons per acre, post-bloom, or petal fall (Bud Break).
• 1–1.5 gallons per acre, 3 weeks later (Full Bloom)
• 1–2 gallons per acre, 6–8 weeks prior to harvest version.
• 1–2 gallons per acre, 3–4 weeks prior to harvest (Harvest).

Use EST’s Soil Revitalizer product to minimize soil compaction. Also, to correct and maintain the soil pH level.

DRIP BENEFITS

• This program will provide needed supplemental P and K for the plant prior to critical growing stages. Early season P and K can be limited by soil tie up when soil temperatures are below 60°F. Inadequate P levels within the plant can limit cell division, producing smaller fruits.
• Mid-season applications provide potassium when the fruit needs it most to help color, sugar, and solids. With the delivery capability of a drip system and Grape Blend with Calcium & Zinc is 100% water soluble fertilizer product and available potassium sources, you can spoon feed this critical nutrient prior to the plant’s demand.
• Use lower rates if this is a supplemental program. If the rate above is the total P and K program, use the higher application rates.

FOLIAR PROGRAM FOR WINE GRAPES: Application Rate Gallon per Acer Fertilizer Stage

(Timeline may vary per region)

• 1–1.5 gallons per acre, Pre-bloom (May 1–20) with fungicide/pesticide.
• 1–1.5 gallons per acre, Post-bloom (June 15).
• 1–1.5 gallons per acre, 3 weeks later Berry sizing (July 1–15).
• 1–2 gallons per acre, 6–8 weeks prior to harvest (Aug 1) apply alone.
• 1–2 gallons per acre, 3–4 weeks prior to harvest.

FOLIAR BENEFITS

• The foliar program is a supplemental program and should be used with a complete broadcast or drip fertility program. It is designed to supply 10%‒20% of plant P and K throughout growing season
• If using a pH sensitive pesticide, use EST’s pH Max to adjust pH before foliar applying.
• Grape Blend with Calcium & Zinc contains very-low sodium and is the most economical and 100% water soluble foliar apply product in the industry. Potassium phosphate can be taken into the vines almost immediately because of its nano-enhanced particles and low sodium/high solubility without foliar burn.

NOTE: Please consult your distributor or Enviro Science Technologies Inc.’s. technical advisor for additional customize treatment methods and accurate and specific dosage and application rate. We highly recommend that soil must be tested before applying any fertilizer program.

EASE OF USE

• Fast-acting and maximum absorbency.
• 100% water soluble and bio-available.
• Can be applied through irrigation systems or fertigated through sprinkler systems.
• Can be mixed with various liquid fertilizers formulations.
• Easy to handle and tank mix.

Liquid Potash Concentrate is a potassium solution, which can be used in foliar application or applied to soil, or side-dress at planting. It can also be applied in combination with other crop production or protection products and presents a low risk of crop injury.

When applied as recommended, Liquid Potash Concentrate may produce equivalent or better crop response compared to higher rates of conventional potassium fertilizers. Liquid Potash Concentrate is processed and formulated with macromolecular technology to help increase absorption rate greater than 3–5 times better than any conventional potassium-based products.

Liquid Potash Concentrate can be used in any cropping situation where potassium is needed, and its unique formula provides increased crop utilization, allowing lower total product application volume to produce and receive the greater results as other conventional potassium fertility products when applied at typical rates.

PRODUCT FEATURES

• Fast absorbing liquid form to increase K uptake.
• Helps correct potassium deficiencies that reduce yield potential.
• Helps enhance micronutrient response.
• Increases energy for plants and growth.

Liquid Potash Concentrate can provide potassium fertility depending on soil conditions, type of application, and rate. If applied with other crop production or protection products, please consult a representative or your dealer for the best application method to achieve optimal results for your specific crop and soil conditions.

DIRECTIONS

Liquid Potash Concentrate is the ideal product for supplying potassium to any crops and is applied by broadcast or banded over the top of the seed zone, alongside as in a 2” by 2” spread, as a top-dressing or a side-dress application, as part of a foliar fertility program, or through fertilization.

APPLICATION

Vine, field, vegetable, and tree: Apply Liquid Potash Concentrate at the rate of 2–4 quarts per acre approximately 3–4 weeks before harvest. Repeat 2–4 quarts per acre at approximately 7–10 days before harvest.

Row Crops: Apply ½ gal to 2 gal per acre depending on type of crop and soil conditions. Soil test is recommended before determining proper dosage requirement for specific crop and soil conditions.

Follow directions carefully. Consult your dealer or supplier for timing and methods of applications, weather, and crop conditions.

Note:

LSN 32-0-0 is concentrated, and recommended dilution is per application rate. It should be used as a supplement to an existing fertilization program. For best results, application should be made directly to the leaf surface in the form of a foliar spray. Alternatively, the application can be applied directly to the soil.

BENEFITS

• Supports nutrient uptake
• Supports native soil organisms and beneficial microbes.
• Improves overall plant nutrition.

DIRECTIONS

Apply as directed. Shake well before using.

APPLICATION RATE

Mix 1.5–2 gallons of LSN 32-0-0 with 15–20 gallon of water per acre. Apply as needed throughout growing season.

For best result, application should be applied in a foliar spray directly to the leaf surface to maximize absorption by the plant. Product can be applied through irrigation systems or tank sprayers.

Corn, Beans & Other Row Crops: Use a total of 20–24 gallons per acre during the growing season. Applications can be divided during planting and based on various maturity stages.

Seed Furrow (Broadcast): Apply 3–5 gallons per acre before planting and incorporate into the upper 4–6 inches of soil. Optionally use with 10–15 gallons of water per acre.

Band or Strip-Till: Apply 3–5 gallons per acre, placed beside and/or below the seed furrow. Optionally use with 10–15 gallons of water per acre.

Ground Equipment: Apply 3–5 gallons per acre. Optionally use with 10–15 gallons of water per acre.

Foliar Application: Mix 1.5–2.0 gallons of LSN 32-0-0 per 15–20 gallon of water per acre. Apply as needed throughout growing season.

For Root Feeding Trees & Shrubs: mix 4 oz per inch of trunk diameter with 5–10 gal of water and pour or inject into the drip line. Use 1 gal per 64 gal of water for foliar applications.

For Lawn and Turf: 1–2 pints to cover 10,000 sq ft

These products may be used on many different crops. Rate information provided is a range and not specific to one crop.

For a customized application rate, please contact your EST representative.

Note:

Ease of Use

• Fast-acting and maximum absorbency.
• 100% water soluble
• Can be applied through irrigation systems or fertigated through sprinkler systems.
• Can be mixed with various liquid fertilizers formulations.
• Easy to handle and tank mix for foliar application.

This blend provides balanced NPK and micronutrients that helps produce deep-green foliage. Multipurpose Plant Food is concentrated and is recommended to be diluted per the application rate. It should be used as a supplement to an existing fertilization program. Works on both Non-GMO and GMO plant and seed genetics.

Specifically designed to use for corn, beans, alfalfa, hay, milo, sorghum, and other row crops.

DIRECTIONS

Apply as directed. Shake well before using.

APPLICATION RATE

For best results, application should be made directly to the leaf surface in the form of a foliar spray. Alternatively, the application can be made directly to the soil as required.

Agriculture: 2‒4 qt per acre. Use with 10–15 gallons of water.

Home Landscape and Gardens: 2 ounces per gallon of water to cover 1,000 square feet. Apply 3 times during the growing season. It can be mixed with Liquid Soil Conditioner.

Note:

Note: For more specific application rate per acre, please contact your distributor for details. Application rates may very base on type of soil, climate and seed type

Potash with Humic is a potassium solution, which can be used in foliar application or applied to soil, or side-dress at planting. It can also be applied in combination with other crop production or protection products and presents a low risk of crop injury.

When applied as recommended, Potash with Humic may produce equivalent or better crop response compared to higher rates of conventional potassium fertilizers. Potash with Humic is processed and formulated with macromolecular technology to help increase absorption rate greater than 3–5 times better than any conventional potassium-based products.

Potash with Humic can be used in any cropping situation where potassium is needed, and its unique formula provides increased crop utilization, allowing lower total product application volume to produce and receive the greater results as other conventional potassium fertility products when applied at typical rates.

PRODUCT FEATURES

• Fast absorbing liquid form to increase K uptake.
• Helps correct potassium deficiencies that reduced yield potential.
• Helps enhance micronutrient response.
• Increases energy for plant and growth.

Potash with Humic can provide potassium fertility depending on soil conditions, type of application, and rate. If applied with other crop production or protection products, please consult a representative or your dealer for the best application method to achieve optimal results for your specific crop and soil conditions.

DIRECTIONS

Potash with Humic is the ideal product for supplying potassium to any crops and is applied by broadcast or banded over the top of the seed zone, alongside as in a 2” by 2” spread, as a top-dressing or a side-dress application, as part of a foliar fertility program, or through fertilization.

APPLICATION

Vine, field, vegetable, and tree: Apply Potash with Humic at the rate of 2–4 quarts per acre approximately 3–4 weeks before harvest. Repeat 2–4 quarts per acre at approximately 7–10 days before harvest.

Row Crops: Apply ½ gal to 2 gal per acre depending on type of crop and soil conditions. Soil test is recommended before determining proper dosage requirement for specific crop and soil conditions.

Follow directions carefully. Consult your dealer or supplier for timing and methods of applications, weather, and crop conditions.

Recommended Dosage Rate: 96‒128 fluid ounces per acre for High Rate Application Dosage and 64‒85 ounces per acre for Low Rate Application Dosage.

Note:

Start Up promotes starting growth for corn, wheat, milo, and other seeded crops. Use as a Start Up is designed to use during seeding and replanting and promotes starting growth for corn, wheat, milo, and other seeded crops. Use as a supplement to an existing fertilization program. For best results, apply during planting for optimizing nutrient conditions for seed germination and stronger root establishment. Application can be made directly to the soil or injected as foliar spray.

Start Up benefits seedlings when growth of the nodal root system is slowed by weather, impeded by seedbed conditions, or damaged by pests or other factors. It helps reduce and minimize uneven stand development and yield loss that often results from these conditions from early season stress due to weather conditions. Start Up may provide the most benefit to growers using no-till or high-residue farming systems.

Works well with early planting cycle with all soil types like clay, sandy, peaty, chalky, and loamy. Helps with seed germination and root establishment for healthier growth cycle.

DIRECTIONS

Apply as Directed. Shake well before using.

Soil test must be determined before application. This product may be used on many different crops. Rate information provided is a range and not specific to one crop. Application rates may vary based on type of soil, soil condition, soil testing, climate, and seed type. When mixing with other fertilizer products it is always recommended to perform a jar test to ensure compatibility. For more specific application rate per acre, please contact your distributor for details.

APPLICATION RATE

AGRICULTURE: Use 4–6 quarts per acre with 8‒15 gallons of water. Product can be directly injected into the soil during seeding and replanting.

HOME LANDSCAPE AND GARDENS: 2‒4 fl oz per gallon of water to cover 1,000 square feet. For best results apply during seeding in spring or fall.

Works on both Non-GMO and GMO plant and seed genetics.

PRODUCT DESCRIPTION

Timely Start provides nutrients for the start of growth in corn, wheat, milo, and other seeded crops. Use as a supplement to an existing fertilization program. For best results, apply during planting for optimizing nutrient conditions for seed germination and stronger root establishment. Application can be made directly to the soil or injected as foliar spray.

Timely Start benefits seedlings when growth of the nodal root system is slowed by weather, impeded by seedbed conditions, or damaged by pests or other factors. It helps reduce and minimize uneven stand development and yield loss that often results from these conditions from early season stress due to weather conditions. Timely Start may provide the most benefit to growers using no-till or high-residue farming systems.

Timely Start works well with early planting cycle with all soil types like clay, sandy, peaty, chalky, and loamy. Helps during seed germination and root establishments for healthier growth cycle.

DIRECTIONS

Apply as Directed. Shake well before using.

Soil test must be determined before application. This product may be used on many different crops. Rate information provided is a range and not specific to one crop. Application rates may vary based on type of soil, soil condition, soil testing, climate, and seed type. When mixing with other fertilizer products it is always recommended to perform a jar test to ensure compatibility. For more specific application rate per acre, please contact your distributor for details.

APPLICATION RATE

AGRICULTURE: Use 4–6 quarts per acre with 8‒15 gallons of water. Product can be directly injected into the soil during seeding and replanting.

HOME LANDSCAPE AND GARDENS: 2‒4 ounces per gallon of water to cover 1,000 square feet. For best results apply during seeding in spring or fall.

This product may be used on many different crops. Rate information provided is a range and not specific to one crop.

Works on both Non-GMO and GMO plant and seed genetics.

1 Gal at 68°F weighs 8.86 lbs. or 4.02 kg

EASE OF USE

• Fast-acting and maximum absorbency.
• 100% water soluble and bio-available.
• Easy to handle and tank mix.
• Economical, with low application rates.
• Can be applied with drip irrigation system.
• Can be applied in-ground during seeding or replanting.
• Designed to be used by itself or mixed with various other NPK fertilizer formulations.

This is a concentrated blend and is recommended to be diluted per the application rate. Should be used as a supplement to an existing fertilization program. For best results, application should be applied directly to the leaf surface in the form of a foliar spray. Alternatively, the application can be made directly to the soil, or product can be applied via hydroponic systems.

DIRECTIONS

Apply as directed. Shake well prior to use.

Soil test must be determined before application. This product may be used on many different tomato variety. Rate information provided is a range and not specific to one variety. Application rates may vary based on type of soil, soil condition, soil testing, climate, and seed type. When mixing with other fertilizer products it is always recommended to perform a jar test to ensure compatibility. For more specific application rate per acre, please contact your distributor for details.

APPLICATION RATE

Dosage can be customized based on the plant’s various growth stages, can be adjusted through various cycles, from planting, seedling, onto harvest.

Commercial Tomato Farms: 32‒64 fl oz of concentrate per acre with 10–20 gallons of water per acre.

Home Gardens: 4‒6 fl oz per gallon of water to cover 1,000 square feet. It can be mixed with Liquid Soil Conditioner. Based on climate and soil condition apply 3–5 times during various growth stages of the tomato plants.

Hydroponic Systems: Tomato Blend can be applied through with hydroponic systems, use rate can be adjusts based on feeding needs, add 20–32 fl oz of Tomato Blend to 100 gal of water to feed plant during each watering cycle from seeding to harvest. Do not overwater plants or drown roots.

Note:

EASE OF USE

• Fast-acting and maximum absorbency.
• 100% water soluble and bio-available.
• Can be applied through irrigation systems or fertigated through sprinkler systems.
• Can be mixed with various liquid fertilizers formulations.
• Easy to handle and tank mix for foliar application. 

PRODUCT DESCRIPTION

9-18-9 Traditional provides nutrients for the start of growth in corn, wheat, milo, and other seeded crops. For best results, apply during planting for optimizing nutrient conditions for seed germination and stronger root establishment. Application can be made directly to the soil or injected as foliar spray.

9-18-9 Traditional benefits seedlings when growth of the nodal root system is slowed by weather, impeded by seedbed conditions, or damaged by pests or other factors. It helps reduce and minimize uneven stand development and yield loss that often results from these conditions from early season stress due to weather conditions. 9-18-9 Traditional may provide the most benefit to growers using no-till or high-residue farming systems.

9-18-9 Traditional works well with early planting cycle with all soil types like clay, sandy, peaty, chalky, and loamy. Helps during seed germination and root establishments for healthier growth cycle. Apply during the entire growing season as needed for all applicable crops.

DIRECTIONS

Apply as Directed. Shake well before using.

Soil test must be determined before application. This product may be used on many different crops. Rate information provided is a range and not specific to one crop. Application rates may vary based on type of soil, soil condition, soil testing, climate, and seed type. When mixing with other fertilizer products it is always recommended to perform a jar test to ensure compatibility. For more specific application rate per acre, please contact your distributor for details.

APPLICATION RATE

AGRICULTURE: General Recommendation

Mix with 10 to 15 gal of water for following applications.

Planting: Apply 4–6 quarts per acre.

Foliar Application: Apply 2–4 quarts per acre depending on crop and growth stages. Foliar applications can be repeated as needed during the growing season, can be repeated every 3 to 4 weeks apart if required.

Side Dress: Apply 2–4 quarts per acre.

EASE OF USE

• Fast-acting and maximum absorbency.
• 100% water soluble and bio-available.
• Easy to handle and tank mix.
• Economical, with low application rates.
• Can be applied with drip irrigation system.
• Can be applied in-ground during seeding or replanting.
• Designed to be used by itself or mixed with various other NPK fertilizer formulations.

PRODUCT DESCRIPTION

6-24-6 Traditional provides nutrients for the start of growth in corn, wheat, milo, and other seeded crops. For best results, apply during planting for optimizing nutrient conditions for seed germination and stronger root establishment. Application can be made directly to the soil or injected as foliar spray.

6-24-6 Traditional benefits seedlings when growth of the nodal root system is slowed by weather, impeded by seedbed conditions, or damaged by pests or other factors. It helps reduce and minimize uneven stand development and yield loss that often results from these conditions from early season stress due to weather conditions. 6-24-6 Traditional may provide the most benefit to growers using no-till or high-residue farming systems.

6-24-6 Traditional works well with early planting cycle with all soil types like clay, sandy, peaty, chalky, and loamy. Helps during seed germination and root establishments for healthier growth cycle. Apply during the entire growing season as needed for all applicable crops.

DIRECTIONS

Apply as Directed. Shake well before using.

Soil test must be determined before application. This product may be used on many different crops. Rate information provided is a range and not specific to one crop. Application rates may vary based on type of soil, soil condition, soil testing, climate, and seed type. When mixing with other fertilizer products it is always recommended to perform a jar test to ensure compatibility. For more specific application rate per acre, please contact your distributor for details.

APPLICATION RATE

AGRICULTURE: General Recommendation

Mix with 10 to 15 gal of water for the following applications.

Planting: Apply 1–2 Gallons per acre.

Foliar Application: Apply 2–4 quarts per acre depending on crop and growth stages. Foliar applications can be repeated as needed during the growing season, can be repeated every 3 to 4 weeks apart if required.

Side Dress: Apply 1–2 Gallons per acre.

Works on both Non-GMO and GMO plant and seed genetics.

EASE OF USE

• Fast-acting and maximum absorbency.
• 100% water soluble and bio-available.
• Easy to handle and tank mix.
• Economical, with low application rates.
• Can be applied with drip irrigation system.
• Can be applied in-ground during seeding or replanting.
• Designed to be used by itself or mixed with various other NPK fertilizer formulations.

2-0-20-6S Traditional is designed for all types of row crops, vegetables, fruit trees, sod, turf, lawn, hay, cotton, peanuts, potatoes, beets, hemp, various other crops, cereals and forage grasses where yellowing of newly-emerging leaves is an indicator of sulfur deficiency.

Sulfur Deficiency Symptoms

Sulfur is essential for many growth functions in plants including nitrogen metabolism, enzyme activity, and protein and oil synthesis. Generally, sulfur-deficient plants have short and/or spindly stems and yellowing of the young (top) leaves. With nitrogen deficiency, yellowing affects the older, lower leaves first. Sulfur-deficient canola can also have purpling and upward cupping of young leaves, delayed and prolonged flowering, pale-colored flowers, and fewer, smaller pods. Sulfur-deficient alfalfa, pea, and other legumes may have reduced nitrogen fixation.

Benefits of Sulfur

• Optimizes conditions for resistance of and tolerance to abiotic stress.
• Helps condition the soil for improved plant performance and vigor.
• Changes cation exchange capacity (CEC).
• Helps prevent and correct sulfur nutrient deficiency.
• Increases nitrogen metabolism.
• Supports functions of beneficial microbes in the soil.
• Helps utilize soil micronutrients more efficiently and increase uptake.
• Helps condition the soil for improved plant performance and vigor.

EASE OF USE

• Fast-acting and maximum absorbency.
• 100% water soluble and bio-available.
• Can be applied through irrigation systems or fertigated through sprinkler systems.
• pH neutral and can be mixed with various liquid fertilizers formulations.
• Easy to handle and tank mix for foliar application.

DILUTION RATE

Dilution rates may vary depending on the crops or the plants. Soil tests may be necessary to determine true sulfur deficiency to select correct amount of application.

General Guideline for Dilution*

Foliar Application: Mix 1‒2 quarts of 2-0-20-6S Traditional, with 10‒15 gal of water to cover one acre

In-Furrow Application: Mix 2–3 quarts of 2-0-20-6S Traditional, with 10‒15 gal of water to cover one acre.

Root Feeding Trees and Shrubs: Mix 4 oz per inch of trunk diameter with 5‒10 gal of water and pour or inject into the drip line. Use 1 gal per 64 gal of water for foliar applications.

*For a customized application rate, please contact your EST representative.

BMX-XXI adjuvant is designed to use with pesticides targeting nematodes. Always follow pesticide safety and handling instructions from the supplier. BMX-XXI safely improves the performance and efficiency of applied pesticides. Mix and apply as recommended by your pesticide supplier It will not disturb essential soil microbes or the plant growth cycle.

BENEFITS

• Naturally-derived from plant extracts and Phyto enzymes.
• Easy-to-use, water-soluble formula.
• Non-toxic.
• Effective for all soil conditions.
• Environmentally-safe and VOC Compliant.
• Enhance and improves abiotic stress tolerance.
• Reduce soil compactions and various complications caused by soil and climate factors.
• Improves and optimize soil conditions for increased plant vigor.
• Will not damage leaves, flowers, fruits, roots, or crops.

Application Rates

Always follow the pesticide’s recommended dosages. Always follow pesticide safety and handling instruction. Recommended mix rates are designed for heavy infestation of nematodes. Consult your distributor for a customized application dosage for your crops. Can be applied in-furrow. Will not damage leaves, flowers, fruits, or crops. For best results, use directly as recommended in chart below.

Target Crops	Application Rate Premixed with Pesticides /Acre	Mix Ratio with Water
Row Crops	1 Pint To 2 Quarts	10‒15 gal / water
Sugar Beets	1 Pint To 2 Quarts	10‒15 gal / water
Peanuts	1 Pint To 2 Quarts	10‒15 gal / water
Beans	1 Pint To 2 Quarts	10‒15 gal / water
Turf and Lawns	1 Pint To 1 Quart	5‒10 gal / water
Vegetables	1 Pint To 1 Quart	5‒10 gal / water
Sod and Grass	1 Pint To 1 Quart	5‒10 gal / water
Rice and Wheat	1 Pint To 2 Quarts	10‒15 gal / water

 It can be mixed with liquid NPK series fertilizer products. It is always recommended to perform a jar test to ensure compatibility.

Bio Fusion-Rx is a nano-driven, all-natural, bio-adjuvant designed to be added to various herbicides in conjunction with Nano Excel 3.0 for various hard-to-remove and resistant weeds.

Technology

Custom engineered, Bio Fusion-Rx contains a selective group of microbes producing specific enzymes within living plant cell tissue to shut down microbes in weed species which produce amino acids required for plant viability. Natural microbes are selected for their capabilities to provide superior crop health and production through enhanced rhizosphere activity and bio-stimulation of plants. The rhizosphere process plays an important role in regulating soil organic matter decomposition and nutrient cycling. These microbes are safe, natural, and NOT genetically modified. This biological adjuvant offers an environmentally-friendly approach that complements conventional methods when mixed with herbicides. It helps meet the need for new weed management strategies as some weeds have become resistant to certain herbicides. Moreover, this technology is safe for applicators and consumers.

Bio Fusion-Rx will not eliminate the need to use chemical herbicides. Both tools require integration with cultivation practices such as tillage and crop rotation in the battle against weeds. By using integrated weed management and combining Bio Fusion-Rx with herbicides, the development of weeds resistant to biological or chemical agents can be slowed or eliminated.

BENEFITS

Bio Fusion-Rx improves penetration and effectiveness of herbicides When applied during planting in connection with herbicides, it will not harm seeds or soil microbes and will not interfere with liquid or dry fertilizers.

Additional Benefits To all Crops

• Decreases abiotic stress caused by herbicides and improves and maintains continuous growth cycle.
• Supports and improves abiotic stress tolerance.
• Supports native beneficial soil organisms and beneficial microbes.
• Increases metabolic activity of soil microorganisms.
• Changes soil cation exchange capacity (CEC).
• Helps condition the soil for improved plant performance and vigor.
• Increases plant abiotic resistance, water retention, fertilizer efficiency, with enhanced nutrient availability.
• Activates native soil organisms; increases root activity for larger, stronger root systems, increases metabolic activity of soil microorganisms.
• Improves the health, appearance, and size of crops and provides exceptional foliar and soil nutrition.
• Helps colonize roots with beneficial organisms.

RESISTANT WEEDS

As Roundup and various herbicides are losing potency due to increasing weed resistance, the species that may be prone to glyphosate resistance based on typical herbicide modes of action are pigweed (including waterhemp, and Palmer amaranth), common lambsquarters, giant ragweed, kochia, and ryegrass. Bio Fusion-Rx has shown tremendous response against resistant weeds when combined with herbicides and Nano Excel 3.0.

EASE OF USE

• Can be applied through irrigation systems or fertigated through sprinkler systems.
• Can be mixed with various liquid fertilizers formulations.
• Easy to handle and tank mix for foliar application.

DIRECTIONS

Dosage

Use as directed.

Use following mix ratio per one acre with 15–20 gal of water.

STANDARD SUGGESTED MIX RATIO

(Mixed with 15–20 gal Water)

PRODUCT	VOLUME
Herbicide	32–40 fl oz
Nano Excel 3.0	8–10 fl oz
Bio Fusion-Rx	2–3 pints
pH Max (pH Max Well Water Adjuster—optional).	4–6 fl oz

Adjust above mix ratio based on maturity, type of weeds and type of herbicide chemistry and brand.

It is always recommended to perform a jar test to ensure compatibility.

For more specific application rate per acre, please contact your distributor for details. Application rates may vary based on type of soil, soil condition, soil testing, climate, and seed type.

Adjuvant & Activator for Glyphosate & 2–4 D, roundup-type Herbicides

TECHNOLOGY OVERVIEW

Nano Excel 3.0 is proprietary Nano-Enhanced adjuvant that is specifically engineered from the ground up to safely improve the performance and efficiency of various herbicides which are designed for generic-type herbicides like glyphosate, 2,4-D and Roundup type herbicides. Nano Excel 3.0 proprietary adjuvants will help to optimize the over-all performance of the host formula by fusing the existing micro particles into a synergistic relationship at the Nano level. In other words, when Nano Excel 3.0 adjuvants are mixed into existing formulations, the final performance of the formula is supercharged at the Nano molecular level to maximize the herbicide’s performance.

BENEFITS

Nano Excel 3.0 is a nanotized adjuvant designed to work with most herbicides for perennial and common agriculture weeds. Always perform a jar test to ensure compatibility.

Nano Excel 3.0 is designed for post-emergent (Spray) herbicide to perform as dual-purpose activator and performance-enhancing adjuvant.

Nano Excel 3.0 activates the salt-based herbicide chemistry by reactivating and nanotizing salt molecules in each formulation, thereby optimizing the performance of various herbicides.

Nano Excel 3.0 is a special-purpose adjuvant that adds various key features that helps maximize the performance of various herbicides.

• Wetting •Drift Control •Herbicide Absorption •Herbicide Penetration •Spray Effects •Rain Fastness
• Enhances herbicide performance for perennial & common agriculture weeds.
• Easy to use and tank-mix with herbicides.
• Designed to enhance effectiveness of post-emergence herbicide performance.
• Helps increase herbicide activity, herbicide absorption and penetration into plant tissue; can also decrease photodegradation of the herbicide.
• Will nanotize the physical characteristics of the spray solution.
• Reduces the surface tension between the spray droplet and the leaf surface by increasing spread rate evenly and effectively.
• Allows leaf structure impregnation in 60 seconds or less with some herbicides.
• Applicators DO NOT recommend adding any additional surfactants, crop oil concentrates, nitrogen fertilizers, spreader-stickers, wetting agents, and penetrants to the herbicide mixture.

APPLICATION

Nano Excel 3.0 is designed to be added directly to the spray tank. In a typical application, the proper mixture of herbicides would be added to the appropriate mixture of water along with the desired ratio of Nano Excel 3.0 ADJ.

• Balance water pH to 5.5 with pH Max (Well Water pH Adjuster).
• Add desired quantity of herbicide recommended by agronomist.
• Add 8–12 fl oz of Nano Excel 3.0 Herbicide Adjuvant mixed with herbicide and use 15–20 gal water per acre for proper coverage.
• For optimum coverage on mature weeds, sprayer speed should be < 7 mph with spray pressure between 30–40 psi.
• Mix well before applying.

Note: We do not recommend any other adjuvants, like crop oil, AMS, or any type of surfactant, to be combined with our additive. It may react with other adjuvants and clog nozzle or spray heads.

For weeds that exceed the herbicide labels harder to control weeds, an additional application of 4 ounces of Nano Excel 3.0 per acre may prove beneficial.

Adjuvant & Activator for Herbicides enhances Herbicide PERFORMANCE For resistant and PERENNIAL weeds

TECHNOLOGY OVERVIEW

Resist Excel for Herbicide ADJ is proprietary Nano-Enhanced adjuvant that is specifically engineered from the ground up to safely improve the performance and efficiency of various herbicides which are designed for resistance weeds. Resist Excel proprietary adjuvants will help to optimize the over-all performance of the host formula by fusing the existing micro particles into a synergistic relationship at the Nano level. In other words, when Resist Excel adjuvants are mixed into existing formulations, the final performance of the formula is supercharged at the Nano molecular level to maximize the herbicide’s performance.

BENEFITS

Resist Excel is a nanotized adjuvant designed to work with most herbicides for resistant weed. Always preform a jar test to ensure compatibility.

Resist Excel is designed for post emergent (Spray) herbicide to perform as dual-purpose activator and performance-enhancing adjuvant.

Resist Excel activates the salt-based herbicide chemistry by reactivating and nanotizing salt molecules in each formulation, thereby optimizing the performances of various chemistries.

Resist Excel is a special-purpose adjuvant that adds various key features that helps maximize the performance of various herbicides.

• Wetting •Drift Control •Herbicide Absorption •Herbicide Penetration •Spray Effects •Rain Fastness
• Designed to enhance effectiveness of post-emergence herbicide performance.
• Helps increase herbicide activity, herbicide absorption and penetration into plant tissue; can also decrease photodegradation of the herbicide.
• Will nanotize the physical characteristics of the spray solution.
• Reduces the surface tension between the spray droplet and the leaf surface by increasing spread rate evenly and effectively.
• Allows leaf structure impregnation in 60 seconds or less with some herbicides.
• Applicators DO NOT have to add any additional surfactants, crop oil concentrates, nitrogen fertilizers, spreader-stickers, wetting agents, and penetrants to the herbicide mixture.

APPLICATION

Resist Excel is designed to be added directly to the spray tank. In a typical application, the proper mixture of herbicides would be added to the appropriate mixture of water along with the desired ratio of Resist Excel ADJ.

• Balance water pH to 5.5 with pH Max (Well Water pH Adjuster).
• Add desired quantity of herbicide recommended by agronomist.
• Add 8–10 fl oz of Resist Excel Herbicide Adjuvant in 15–20 gal water per acre for proper coverage.
• For optimum coverage on mature weeds, sprayer speed should be < 7 mph with spray pressure between 30–40 psi.
• Mix well before applying.

Note: We do not recommend any other adjuvants, like crop oil, AMS, or any type of surfactant, to be combined with our additive. It may react with other adjuvants and clog nozzle or spray heads.

For weeds that exceed the herbicide labels harder to control weeds, an additional application of 4 ounces of Resist Excel per acre may prove beneficial.

Text Goes Here

Text Goes Here

Aqua Balancer moisture management is a unique special complex blend of the Phyto extract (naturally-derived soil surfactant), an active moisture-management technology, combined with advanced sub-macromolecular, soil-wetting technology, to reduce watering needs on larger areas such as golf courses, vegetable gardens, commercial plantings, landscape nurseries, and agriculture. Aqua Balancer is the only product for all-season-long sufficient soil-moisture management in dry and drought-struck areas to maintain soil moisture levels in existing shrubs, turf, crops and plants. Aqua Balancer will increase the survival of new plantings, sod, gardens, seed, crops, bedding plants, shrubs, and trees.

FEATURES/BENEFITS

• Maintains soil moisture level.
• Increases survival rate of crops, gardens, grass and all plants.
• Enhances uptake of nutrients and fertilizer efficiency.
• Increases and improves seed germination.
• Reduces watering cycle and expense.
• Keeps and maintains growth throughout the season.
• Reduces stress and dry spots.
• Provides drought protection.
• Helps loosen soil compactions due to drought.

ADVANCED TECHNOLOGY

Aqua Balancer Moisture Management technology helps increase deeper penetration of moisture and advances sub-micron, micro-molecules that help retain moisture. This is accomplished by intertwining particles with subsurface soil attracting and storing moisture as microscopic droplets near the root mass for plants to sustain growth, increasing uptake of bound soil nutrients for a continued growth cycle.

Recommended Use

• Golf Courses.
• Turf Grass and Hay Fields.
• Landscape areas.
• Vegetable Gardens.
• Athletic Fields.
• Grounds Maintenance.
• Greenhouses.
• Nurseries.
• Trees and Shrubs.
• Seeding, Sodding, and Lawns.
• Farm GroundsRecommended Application Rates

• Dilution Rate for general application: Mix one gallon concentrate to 15 gal of water per one acre. It can be applied with injection and sprinkler systems.
• Note: Aqua Balancer Moisture Management product must be watered in thoroughly after the initial application. Reapply every 3‒4 months on as needed basis.
• Turf, Grass and Lawns:
• General Application Rate: Apply 12 oz of Aqua Balancer per 1,000 sq ft (2.5–3 gallons per acre) by spraying or drenching once every 2–3 months, or if maintaining monthly, at 1/4 rate after initial full-rate application. For best results, apply to moistened soil.
• Water-in with at least 1/10 inch of water within the first couple of hours to ensure Aqua Balancer is washed off foliage and into the soil. Within 24 hours, follow with enough additional water to carry Moisture Manager down to and throughout the root system. The amount of additional water required to carry Aqua Balancer throughout the root system is dependent on the depth of the roots of the treated area. Additional application may be required to correct difficult and extremely dry spot areas. Maintain a regular fertilizer application cycle during this treatment.
• Trees, Shrubs, and Household Plants:
• Dilute Aqua Balancer 2–3 fl oz per gallon of water and apply by drench thoroughly, saturating the root systems.
• Potted and In-Ground Plants: Use 2 fl oz of Aqua Balancer per gallon of water.
• Large Planters, Trees & Gardens:
• Dilute 4–6 fl oz per gallon of water or through injectors at a rate of 50:1 to 100:1 and apply at a rate of 4 ounces of concentrate per an 80 sq ft area. One gallon treats approximately 5,000 square feet. Reapply every 2‒3 weeks if regular water schedule is not maintained.
• Farm Ground and Hay Fields:
• Dilution Rate: Mix 2‒6 quarts concentrate with 10 to 15 gal of water per one acre. It can be applied with injection, drenching, or sprinkler systems.
• For maximum effectiveness reapply Aqua Balancer every three months or when watering is required.

Liquid Thatch-B-Gone induces the natural process of hydrogen-bond breakdown in soil. It works as an organic catalyst in the elimination of thatch, loosening the soil.

ADVANTAGES

• Speeds the breakdown of organic matter.
• Increases the activity of soil organisms.
• Improves water penetration and retention.
• Promotes grass growth; increases speed.
• Makes the soil soft and loose.
• Induces the natural breakdown of thatch to humus.
• Makes grass and plant food available to root system.
• Separates the soil particles.
• Frees trace elements

APPLICATIONS

This product should be applied during the early spring or late fall in warm, moist conditions. Fill a quart jar with Thatch-B-Gone and spray directly onto the area using a standard lawn-type, hose-end sprayer.

A second application may be applied within 30‒60 days due to heavy thatch build-up.

In order for Thatch-B-Gone to be effective, field must be watered after application. When warm moist conditions are present, decomposition will begin within days. In warm weather, thatch may take 60-90 days to decay completely. To avoid build-up of thatch, always catch grass clippings.

COVERAGE RATE

Volume Thatch-B-Gone	Coverage (square feet)
1 quart	2,500
1 gallon	10,000

Dosage should be adjusted according to the thatch build-up.

D-THATCH Concentrate – Bacteria-Based is bacteria in a liquid form, which induces the natural process of breaking down hydrogen bonds in the soil. It works as an organic catalyst in the elimination of thatch, loosening the soil.

ADVANTAGES

• Speeds the breakdown of organic matter.
• Increases the activity of soil organisms.
• Makes the soil soft and loose.
• Separates the soil particles.
• Frees trace elements.

DIRECTIONS

• Mix 1 gallon of D-Thatch with 5 gallons of warm water. Use a fine mist sprayer to wet the soil. This will cover approximately 1 acre.
• To clean the soil on the surface, use a garden hose or pressure washer, using only clean water.
• Rinse the soil thoroughly until it separates from the surface.
• Soapy foam will appear when rinsing; wash clean until the foam disappears.

A second application may be needed for heavy and clay-type soil.

Note: be careful as surfaces may be slippery when wet.

pH MAX reduces water hardness naturally in one step, making it the optimal choice over other conventional and mechanical application methods. This product works in any well water hardness and pH level setting. It stabilizes pH, chelatesdissolved minerals, and blends fertilizers and herbicides, potentially enhancing their potency and performance.

WHAT IS pH?

The pH is the measure of the hydrogen ion concentration in a solution. The pH takes on values from 0–14, with 0 representing the most acidic solution and 14 the most alkaline. The pH of agricultural water plays a critical role in plant health, and it influences the efficacy of pesticides and growth regulators. Plants grow best in a slightly acidic (pH 6.0–6.5) soil solution, and the pH of the water used to mix growth regulators and pesticides controls the chemicals’ half-life.

WELL WATER CONDITIONS

Most well water pH ranges from 8.5‒10.5, depending on the region and underground mineral formations. Some well water shows heavy brine and mineral concentrations due to the depth of well and location and well water pH may show as high as 10.0 and above.

NOTE: Well water also contains various microorganisms, harmful minerals, brine, and other contaminations, of which some are beneficial, and some are harmful for human consumption and agricultural use. Well water must be tested to verify containments before its use. The pH must be adjusted each time before use of well water.

BENEFITS

• Improves solubility of various fertilizers and herbicides.
• Improves effectiveness of various micronutrients through chelation.
• Helps spray-ability and improves absorption rate.
• Reduces water hardness and lowers pH for long-term stability.
• Does not interfere with microbial activity in soil.
• Lower pH uses less water per acre to spray chemicals.
• Maintains, prolongs, and retains soil moisture levels.
• Helps clean supply lines, spray jets, and nozzles.
• Removes rust and mineral build up from well water handling equipment and tanks.
• Balances carbon to oxygen ratio.
• Changes Cation Exchange capacity (CEC)

DIRECTIONS

DO NOT add this product directly into the well. Add pH Max should be added to holding tank first; add water and agitate well. DO NOT mix this product directly with herbicides, pesticides, or other fertilizers and chemical products. Test water for compatibility with any additives.

Note: When pumping out well water from the well, pass water through a filtration system to remove all large and fine floating debris before adding pH Max. A small amount of well water must be pre-tested to determine the pH value prior to adding pH Max to the larger quantity of pumped well water. Extremely high pH may require additional use of pH Max. Well water hardness and dissolved minerals can affect the dosage requirement of pH Max. Consult your distributor or supplier for a customized and tailored application rate of this product for your well water condition.

Mix Rate Table

pH Max mix rate (gallon /well water)
Well Water pH	Add pH MAX / Gallon	Achieved pH
8.0 to 8.5	1.0 to 2.0 fl oz	5.5 to 6.0
8.5 to 9.0	2.5 to 3.5 fl oz	5.5 to 6.0
9.0 to 9.5	3.5 to 4.0 fl oz	5.5 to 6.0

 Seed Coat 100 Bio-Enhanced

Benefits of Seed Coat 100 Bio-Enhanced

• Designed to use with automatic seed treating and coating equipment.
• Nano-enhanced for deeper penetration and durable coating.
• Enriched with seaweed extract and probiotics.
• Contains Pro-Biotic, the same combination of selected strains of beneficial microbes with endo- and ecto-mycorrhizae.
• Microencapsulated and inoculated with Rhizobium and Biovar microbe species needed for improved nodulation.
• 100 Percent natural, chemical, and salt free.
• Excellent to use with corn, wheat, milo, soybeans, sorghum, rice, cotton, alfalfa, and more.
• This product can be customized for specific seed type.
• Improves root health, stress tolerance and plant vigor for better emergence.
• Delivers optimized nutrient uptake for improved overall performance.
• Helps reduce the risks of replants and the associated costs.
• Leaves a gold or brown color coating on all seeds.

DIRECTIONS FOR USE

Use rate: Use 4–6 fl. oz. per 100 lbs. of seeds.

Depending on the size, density and type of seeds it may require additional product per 100 lbs. of seeds. Adjust your dosage according to your seed treatment equipment.

Note:

Consult your dealer or agronomist for specific detailed use of the product, application rates may vary based on soil test.

This Seed Soak-4000 is designed to soak all types of seeds to increase quicker germination and improve quality, stability, growth and based on seeds’ DNA and RNA. It also can help raise protein and sugar levels in plant growth stages and fruits.

Seed Soak-4000 is a Nano-enhanced coating solution that induces a range of biochemical changes in the seed that are required to start the germination process, called “breaking of dormancy cycle hydrolysis or metabolism of inhibitors and enzymes.”

Soaking seeds before planting helps break down the seed’s natural defenses against what it expects from Mother Nature, which then allows it to germinate faster.

Additionally, seeds are naturally actively assaulted; seeds also possess an internal gauge to initiate growth. For most seeds, moisture levels generate an alert to seeds for optimal growth times. By coating seeds, moisture content around the seeds is boosted, which signals to the seed that it is now safe to grow.

Lastly, some types of seeds contain germination inhibitors that are designed to prevent a seed from germinating inside the fruit. These inhibitors must be leached away before a seed can germinate. With natural rainfall, this process can take some time. But when seeds are soaked in this solution, the leaching process is accelerated in those types of seeds.

HOW TO SOAK SEEDS

Use a plastic or stainless steel container to soak seeds. Any other metal can interfere with the soaking process due to oxidization. First, fill container half way with Seed Soak-4000, then put seeds slowly into the container. Make sure that the seeds are completely submerged in the liquid. Always keep 4–6 inches of liquid above the seed surface when soaking.

It is recommended that most seeds be soaked for 12‒24 hours only; some very hard-skinned seeds may require longer soaking time, but seeds should not be soaked for more than 28 hours.

There are many factors that play key roles in how well seeds react to soaking. Seeds with particularly hard coats can benefit from scarification before soaking. Scarification means to damage the seed coat in some way so that the water is better able to penetrate the seed. Scarification can be done through several methods:  rubbing the seed on fine grain sand paper, nicking the seed coat with a knife, and even gently tapping the seed with a hammer to help crack the seed coat. These traditional methods can greatly damage seeds and affect germination. The seeds may not even germinate, having a great impact on harvest and yield. A damaged seed becomes more prone to various types of diseases and uneven growth patterns.

Seed Soak-4000 provides Nano abrasions without damaging the seeds’ outer layer tremendously improving penetration of water, micronutrients, and fertilizer from the soil that results in quick germination and start of growth.

After soaking your seeds, they can be planted as directed. Follow a seed-planting guide based on type of seeds and equipment used for planting

This Seed Soak-4000PD is designed to soak all types of seeds increasing faster germination and improving quality, stability, and growth. Based on seeds’ DNA and RNA, it also can help raise protein and sugar levels at plant growth stages and fruit yield.

Seed Soak-4000PD is a Nano-enhanced coating solution inducing a range of biochemical changes seeds require to start the germination process, called “breaking of dormancy cycle hydrolysis or metabolism of inhibitors and enzymes.”

Additionally, seeds are naturally actively assaulted; seeds are also given an internal gauge to initiate growth. For most seeds, moisture levels generate an alert to seeds for optimal growth times. By coating seeds, moisture content around the seeds is boosted, which signals to the seed that it is now safe to grow.

Lastly, some types of seeds actually contain germination inhibitors designed to prevent a seed from germinating inside the fruit. These inhibitors must be leached away before a seed can germinate. With only natural rainfall, this process can take some time. But when seeds are coated with Seed Soak-4000PD, the leaching process is accelerated in these seeds.

In conclusion, coating seeds before planting helps break down the seed’s natural defenses against what it expects from Mother Nature, which then allows it to germinate faster.

HOW TO COAT SEEDS

Use rotary dry coating mixer or use auger type mixer to coat seeds. A manual, tumbler-type mixer can be used for small batches. Mixing containers and equipment should be dirt, dust, and moisture free. First, fill the container with un-coated seeds then add Seed Soak-4000PD while mixing. Mix for 5‒10 minutes until seeds are evenly coated. After mixing, remove seeds from the mixer. Put seeds slowly into a plastic bag and then into a container. After filling bag, remove excess air or use a vacuum (suction) device to remove trapped air from the bag. Packaged seed bags must be stored in a cool and dry place. Package or container must be stored on a pallet, away from direct contact on bare floors.

It is recommended that most seeds be coated for minimum 6‒8 hours before planting. Some very hard-skinned and large-size seeds may require additional 1‒2 hour soaking time. Coated seeds can be packaged in a vacuum plastic bag for up to 1 year shelf life.

There are many factors that play key roles in how well seeds react to this coating treatment. Seeds with particularly hard coats can benefit from scarification before soaking. Scarification means damaging the seed coat in some way so the water is better able to penetrate the seed. Scarification can be done through several methods: rubbing the seed on fine grain sand paper, nicking the seed coat with a knife, and even gently tapping the seed with a hammer to help crack the seed coat. These traditional methods can greatly damage seeds and affect germination. The seeds may not even germinate, having a great impact on harvest and yield. A damaged seed becomes more prone to various types of diseases and uneven growth patterns. A damaged seed becomes more prone to various types of diseases and uneven growth patterns.

Seed Soak-4000PD provides a Nano-abrasion coating without damaging the seed outer layer, tremendously improving penetration of water, micronutrients, and fertilizer from the soil resulting in quick germination and growth initiation. Seed Soak-4000PD also prevents surface mold and fungus from growing on the treated surface.

Coated seeds can be planted as directed. Follow a seed planting guide based on seed type and planting equipment.

Please consult your distributor or technical advisor for additional customized seed coating treatment.

Brix Up Liquid Brown Sugar with Kelp for Organic Production adds complex carbohydrates in the form of bio-available sugar to plants. Using brown sugar to add carbohydrates increases plant vigor.

Brix Up Liquid Brown Sugar with Kelp for Organic Product is OMRI Listed. esg-15524

BENEFITS

• Contains complex carbohydrates in the form of cane molasses.
• Help increase overall plant mass by improved nutrient uptake.
• Helps raise glucose level in your crops.
• Helps condition the soil for improved plant performance and vigor.
• Optimizes conditions for resistance of and tolerance to abiotic stress.
• Promotes rapid nutrient uptake through the root system.
• Energizes beneficial microbes.
• Supports native soil organisms and beneficial microbes.
• Increases organic matter in the soil.
• Enhanced absorption for better performance.

EASE OF USE

• Easy to handle and tank mix.
• Economical, with low application rates.
• Can be applied through irrigation systems.
• Can be applied with drip irrigation system.
• Can be applied in-ground or side dressed.
• Designed to be used by itself or mixed with various other NPK fertilizer formulations.
• Can be mixed with various liquid fertilizers formulations and herbicides.

DIRECTIONS

General recommendation; use 16–32 fl oz per acre, with 10–15 gallons of water. For best results apply 3 times during the growing season. Application should be made directly to the leaf surface in the form of a foliar spray. Mix well before applying.

Soil or Drip irrigation system: use 16–24 fl oz per acre with every feeding cycle.

During seed and planting: use 16–20 fl oz per acre with 10–15 gallons of water.

Recommendations

To ensure compatibility, a jar test or strip test should be conducted before adding to your tank mix. Use in accordance with recommendations of a qualified individual or institution, such as, but not limited to, a certified crop advisor, agronomist, university crop extension publication, or apply according to recommendations in your approved nutrient management plan.

Bio Kelp feeds soil beneficial soil microbes. Also supports beneficial microbes/augments activity and function of beneficial microbes. Contains Kelp. Enhanced absorption for better performance.

Bio Kelp It will not interfere with pesticides and herbicides and is safe to use on newly-seeded and existing lawns. Bio Kelp can be used on all soil types, such as sandy, clay, loamy, silty, peaty, saline, black, red, yellow, and chalky. May be applied to row crops, small grains, legumes, turf, trees, berries, melons, fruits, vegetables, forages, and horticulture.

Bio Kelp for Organic Product is OMRI Listed. esg-15525

Use per acre	Bio Kelp	Mix Well with Water
Planting	20–30 fl oz	10–15 gallons
Foliar	16–25 fl oz	10–15 gallons
Side Dress	16–32 fl oz	10–15 gallons
Fertigation	16–32 fl oz	10–15 gallons
Compatible and blends easily with most other Enviro Science Technologies Inc.’s. micro- blends, NPK, and soil amendment products.

Note:

Intelli Liquid Humic for Organic Production contains humic acid, in an easily mixable form that may help micronutrient uptake for plants.

Intelli Liquid Humic for Organic Production Product is OMRI Listed. esg-15494

BENEFITS

• Help increase overall plant mass by improved nutrient uptake.
• Helps condition the soil for improved plant performance and vigor.
• Promotes rapid nutrient uptake through the root system.
• Increases organic matter in the soil.
• Holds exchangeable plant nutrients
• Enhanced absorption for better performance.

DIRECTIONS

Mix 16‒32 fl oz in a minimum of 10‒15 gallons of water per acre for both foliar and in-furrow application. Application rates and the number of applications necessary will vary with the severity of the soil conditions. Please consult a technical sales representative from EST, Inc. for a custom designed protocol. Once diluted, product must be used within 24 hours. If soil temperature is below 45°F, performance is significantly reduced. Given the variables to consider, the number of applications prior to achieving desired results might vary.