1100 Gel is a high-viscosity, synthetic-polymeric-nano fusion that is useful in thickening hydrochloric acid, brines, or fresh water. It has excellent high-temperature stability and provides greater efficiency by producing more viscosity with each pound of polymer. 1100 Gel is particularly effective as a friction reducer in fresh water, various brines, and in hydrochloric acid, and has been widely used for that purpose. 1100 Gel is a highly-concentrated semi-liquid polymeric nanoparticle suspension providing quick hydration in fresh and brine water.
BENEFITS
HANDLING: Suspension flows readily, even in severe cold and frigid conditions. The pour point is below -10°F, allowing the product to be easily poured out of a container, or metered through a positive displacement pumping method.
RAPID HYDRATION: Complete viscosity will develop in 2% KCl within one minute at 75°F. Also this product can be used with continuous mixing applications, such as Slick Water Fracturing treatments, under adverse field mixing conditions. 1100 Gel can be applied directly to calcium chloride brine with rapid viscosity development.
SUSPENSION STABILITY: Long-term superiority. This nano-fusion formula utilizes a base fluid system successfully used in other polymer suspensions for well over a decade. 1100 Gel has proven to be stable, with no indication of particle settling or phase separation for more than a year under normal storage conditions.
APPLICATIONS
- Improves results by live acid penetrations.
- Thickener for slick water fracturing.
- Friction reducer for acids and brines.
- Thickener for fresh water or brines in workover or completion operations.
- Thickener or aqueous lubricant in pipeline, fiber optics, and related drilling and placements.
- Disposal Wells and Down-hole Drilling.
POLYMER CLEANUP
Use ammonium persulfate solution to clean effected areas including near wellbore areas.
HANDLING & STORAGE
Keep product from freezing. Store at room temperature. Keep container closed when stored.
Bio Balance Downhole Drilling Fluid is a member of organic-complex oil chemistry. It is designed for downhole drilling that can be used with water- and oil-based muds, and heavy brine solutions. It is extremely stable at high temperatures.
Bio Balance Downhole Drilling Fluid is an efficient friction reducer for a wide variety of fluid types, including fresh and sea water, heavy brine and high acid concentration.
BENEFITS OF BIO BALANCE DOWNHOLE DRILLING FLUID
- Hydrates rapidly in fresh water and brine water.
- Resists thermally-induced hydrolysis.
- Maintains solubility at high temperatures.
- Provides excellent friction reduction.
- Thickens brines of various compositions.
- Improves carry capacity of fluids.
- Reduces torque.
- Reduces friction to increase ROP.
- Increases lubricity to save mud pumps and motors, and drill bits.
- High tolerance to changes in pH and temperature.
- Concentrated and VOC compliant.
- Excellent as a thickener for slick water fracturing.
- Liquid form more easily disperses than powder.
- Can be mixed on the fly.
- Does not cause lumping problems compared to powdered friction reducer.
- Effective at low concentrations (0.5 to 0.75/gal per 1000 gal) in brine water.
UNIQUE FEATURES
Useful as a thickener or friction reducer in the following brines or mixtures:
- Fresh water.
- Potassium chloride.
- Sodium chloride.
- Calcium chloride.
- Seawater.
- Alkali metal formates.
- Heavy brine water.
- Sodium chloride/sodium carbone.
APPLICATIONS
Bio Balance Downhole Drilling Fluid has historically been used in a wide variety of oilfield applications. Because of its excellent friction-reduction capabilities, it has been widely used in coiled tubing workover operations and in fracture acidizing. It provides excellent stability, lubricity and viscosity at temperatures above 300°F.
In conformance-control applications, the Bio Balance Downhole Drilling Fluid provides flexibility in treatment design and superior high-temperature stability. At low-to-intermediate temperatures, it can be readily cross-linked with chromium, aluminum, and zirconium ions to produce gels for profile modification or water shutoff. At high temperatures, it can be readily cross-linked with various organic systems, including phenol-formaldehyde, resorcinol-formaldehyde, and phenyl acetate-HMTA or hydroquinone-HTMA, and various minerals.
Suggested Use Rate: To calculate the concentration of the slug put in gallons, multiple gallons by 5%. That number is the number of gallons of Bio Balance Downhole Drilling Fluid you should use in your slug pit.
TYPICAL PROPERTIES*
| TECHNICAL DATA | |||
| Test Method | |||
| Product Number | 502 | ||
| API | 29.08 | ||
| Specific Gravity | 0.8812 | ASTM 4052 | |
| Lbs/Gal | 7.339 | ||
| Density | 0.88071 | ||
| Flash Point °C | 186 | ASTM D92 | |
| Pour Point °C | -18 | ASTM D97 | |
| Color | <1.0 | ASTM D1500 | |
| Viscosity @100 °C cSt | 6.021 | ASTM D445 | |
| Viscosity@40 °C cSt | 36.53 | ASTM D445 | |
| Viscosity Index (VI) | 109 | ASTM D2270 | |
*Typical Properties are typical of those obtained with normal production tolerance and do not constitute essentially a specification. Variations that do not affect product performance are to be expected during normal manufacture and at different blending locations. The information contained herein is subject to change without notice.
PACKAGING
5-gal pails, 275-gal totes, and bulk load.
LIMITED WARRANTY
EST has no control over the storage handling or use of this product, thus the guarantee is limited to the purchase price of the detective material only. All information and direction as contained in this bulletin and on the product label are intended to be used by person having experience and practical application skill. No other guarantees/warranties are expressed or implied.
DM – 8000 is a versatile oil-drilling defoamer capable of effectively removing entrapped air from all types of water-based mud under severe field conditions in a wide range of operations. It is utilized to reduce surface tension in water-based drilling fluids as well as solids-free workover and completion fluids. It is effective at high temperatures and at different pH levels of water-based mud. It tolerates high concentration of salts.
ADVANTAGES
- Controls foaming in dispersed and non-dispersed drilling fluid systems.
- Effectively defoams mud containing fresh water or seawater.
- Controls foaming in fluid viscosities with polymer.
- Helps stabilize pump pressure by removing trapped air and gas, and it is environmentally safe.
TECHNICAL PROPERTIES
| Appearance | Brownish Clear Liquid | Flash Point | 230°F |
| Specific Gravity | 0.82‒1.04 | pH | N/A |
Alcohol-based oilfield defoamer is normally utilized to reduce and control the foaming in brines. It is compatible with freshwater, seawater and brine-system mud. It is also effective in KCl and seawater mud.
PRECAUTION: Emptied container retains vapor and product residue. Do not cut or weld on or near this container. Follow all label warnings especially during application and cleaning. Do not reuse container for any other use.
STORAGE: Keep away from open flame, heat and spark.
FOR OIL DRILLING MUD
Defoamer OFDM-4 is a versatile oil-drilling defoamer capable of effectively removing entrapped air from all types of water-based mud under severe field conditions in a wide range of operations. It is utilized to reduce surface tension in water-based drilling fluids as well as solids-free workover and completion fluids. It is effective at high temperatures and at different pH levels of water-based mud. It tolerates high concentration of salts.
Alcohol-based oilfield defoamer is normally utilized to reduce and control the foaming in brines. It is compatible with freshwater, seawater, and brine-system mud. It is also effective in KCl and seawater mud.
ADVANTAGES
- Controls foaming in dispersed and non-dispersed drilling fluid systems.
- Effectively defoams mud containing freshwater or seawater.
- Controls foaming in fluid viscosities with polymer.
- Helps stabilize pump pressure by removing trapped air and gas, and it is environmentally safe.
TECHNICAL PROPERTIES
| Appearance | Clear Liquid | Flash Point | 54°F |
| Specific Gravity | 0.804 | pH (neat) | 7.0–8.5 |
PRECAUTION: Emptied container retains vapor and product residue. Do not cut or weld on or near this container. Follow all label warnings especially during application and cleaning. Do not reuse container for any other use.
STORAGE: Keep away from open flame, heat and spark.
Mud Detergent DMD-1000 is specially formulated to use in almost all water-based drilling fluid systems. It is used for the purpose of reducing surface tension and it is a powerful wetting agent. This promotes the setting of mud pH and reduces the balling of shale cutting and causes an increase in penetration rate. It is also a good emulsifier and lowers torque and drag.
Technical Data
| Physical State | Soapy liquid |
| Density @ 25˚C gm/ml | 1.0 to 1.10 |
| Surface Tension 0.25%(v/v) solution sample in distilled water at 25˚C dynes/cm | 35.0 (max) |
| pH of 1%(v/v) solution of the sample in distilled water | 7.5–10.5 |
While stirring at medium speed in Hamilton Beach Mixer, 1 ml of the sample is added while stirring. Stirring is continued for 5 minutes after addition is complete. Transfer the contents to 500 ml measuring cylinder and observe phase separation.
| Immediate separation | nil of HSD oil | Mud Lubricity Test | 0.20 (Max) |
| HSD oil separation after 24 hrs. at room temp. | 5 ml (Max) | Foaming Tendency Test
Rise in volume due to foaming |
5% max |
Directions
TESTING: While stirring at medium speed in a small mixer, add 1 ml of Mud Detergent DMD-1000 to 500 ml of drilling-mud sample while stirring for 5 minutes. Transfer the contents to 500 ml measuring cylinder and observe phase separation.
DOSAGE
It is advised to use 0.02‒0.04 U.S. gallons per barrel of mud depending on the properties required.
Friction Reducer FR-1000 FW polymers are members of a family of synthetic polymers with varied composition and molecular weight developed for high-temperature oilfield applications. These polymers are generally available as invert emulsions.
FR-1000 FW effectively thickens a wide variety of fluid types including fresh and seawater, brine water, and acid.
ADVANTAGES OF FR-1000 FW
- Hydrates rapidly in fresh and brine water. Resists thermally-induced hydrolysis.
- Provides excellent friction reduction.
- Thickens brines of various compositions.
- Improves carry capacity of fluids.
- Effective at low concentrations (0.5–
0.75 gal / 1000 gal) in freshwater. - High tolerance to changes in pH and temperature.
- Concentrated and VOC-compliant.
- Maintains solubility at high temperatures.
- Excellent as a thickener for slick water fracturing.
- Liquid form disperses more easily than powder.
- Can be mixed on the fly and does not cause lumping problems compared to powdered
friction reducer.
UNIQUE FEATURES
Useful as a thickener or friction reducer in the following brines or mixtures:
| Fresh Water | Sodium Carbone | Alkali Metal Formates | Calcium Chloride |
| Seawater | Potassium Chloride | Sodium Chloride |
APPLICATIONS
FR-1000 FW has been used in a wide variety of oilfield applications. Because of its excellent friction-reducing capabilities, it has been widely used in coiled-tubing workover operations and in fracture acidizing.
In conformance-control applications, FR-1000 FW provides flexibility in treatment design and superior high-temperature stability. At low-to-intermediate temperatures, it can be readily cross linked with chromium, aluminum, and zirconium ions to produce gels for profile modification or water shutoff. At high temperatures, it can readily cross link with various organic systems, including phenol-formaldehyde, resorcinol-formaldehyde, and phenyl acetate-HMTA or hydroquinone-HTMA, and various minerals. Normal suggested application rate is 1 gal concentrate to 1000 gallons of water.
PACKAGING
5-gal jugs, 275-gal totes, and bulk load.
Disposal
Dispose of container and unused contents is accordance with federal, state, and local requirements. Whatever cannot be saved for recovery or recycling should be managed in a n appropriate and approved waste disposal facility. Processing, use, or contamination of this product many change waste management options. State and local disposal regulations many differ from federal disposal regulations.
Limited Warranty
EST Inc. will not be responsible for any injury, loss, or damage if product is used in any manner not in compliance with label directions or if precautions are not observed.
Friction Reducer FR-2000 BW polymers are members of a family of synthetic polymers with varied composition and molecular weight developed for high-temperature oilfield applications. These polymers are generally available as invert emulsions.
FR-1000 FW effectively thickens a wide variety of fluid types including fresh and seawater, brine water, and acid.
ADVANTAGES OF FR-2000 BW
- Hydrates rapidly in fresh and brine water.
- Resists thermally–induced hydrolysis.
- Maintains solubility at high temperatures.
- Provides excellent friction reduction.
- Thickens brines of various compositions.
- Improves carry capacity of fluids.
- Effective at low concentrations (0.5 to 0.75/gal per 1000 gallons) in brine water.
- Concentrated and VOC compliant.
- Excellent as a thickener for slick water fracturing.
- Liquid form more easily dispersed than powder.
- Can be mixed on-the-fly and does not cause lumping problems as compared to powdered friction reducer.
- Provides excellent stability and lubricity at temperatures above 300°F.
- High tolerance to changes in pH and temperature.
UNIQUE FEATURES
Useful as a thickener or friction reducer in the flowing brines or mixtures:
| Fresh Water | Seawater | Heavy Brine Water | Alkali Metal Formates |
| Potassium Chloride | Sodium Chloride | Calcium Chloride | Sodium Carbone |
APPLICATIONS
FR-2000 BW has historically been used in a wide variety of oilfield applications. Because of its excellent friction-reducing capabilities, it has been widely used in coiled-tubing workover operations and in fracture acidizing.
In conformance-control applications, the FR-2000 BW provides flexibility in treatment design and superior high-temperature stability. At low-to-intermediate temperatures, it can be readily cross linked with chromium, aluminum, and zirconium ions to produce gels for profile modification or water shutoff. At high temperatures, it can be readily cross linked with various organic systems, including phenol-formaldehyde, resorcinol-formaldehyde, and phenyl acetate HMTA or hydroquinone-HTMA, and various minerals. Normal suggested application rate is 1 gal concentrate to 1000 gallons of water.
PACKAGING
5-gal pails, 275-gal totes, and bulk load.
Disposal
Dispose of container and unused contents is accordance with federal, state, and local requirements. Whatever cannot be saved for recovery or recycling should be managed in a n appropriate and approved waste disposal facility. Processing, use, or contamination of this product many change waste management options. State and local disposal regulations many differ from federal disposal regulations.
Limited Warranty
EST Inc. will not be responsible for any injury, loss, or damage if product is used in any manner not in compliance with label directions or if precautions are not observed.
Mega Foam–1100 is a multipurpose, air-drilling foamer that foams in fresh or hard water and saturated brine water. It is also used to unload water from gas wells to increase gas production. Treatment rates will vary depending on (1) water characteristics, (2) bottom-hole pressure and gas flow rate, (3) tube depth and size, and (4) hydrocarbon amount. MF – 1100 produces a large volume of stable foam even in the presence of oil. MF-1100 is effective in a broad range of oil field brines up to a temperature of 350°F. MF–1100 is safe to handle and has a high flash point. It does not require any hazardous shipping labels.
ADVANTAGES
- Highly effective foaming agent.
- Foams fresh or hard water and saturated brine.
- Foams in the presence of oil contamination.
- Half-life over 5 minutes in fresh water. (In seconds, equals 57% of foam height in ml.)
- Eliminates the need for two different foaming agents.
- VOC Compliant.
- High flash point.
- Biodegradable.
- No hazardous labeling or shipping requirements.
CHEMISTRY
Foamers are often referred to as soap. The more appropriate name is surfactant which is a shortened term meaning surface-active agent. Surfactants work at the interface between air and water to lower surface tension. By lowering surface tension, the surfactant holds air bubbles in a ring of water lightening the water’s weight and enabling pressure to effectively move the column of water. MF–1100’s truly unique characteristics of stable foaming and extended half-life produce superior drilling performance. While most foamers can generally be described as an alcohol ether sulfate, MF – 1100 is a blend of different, nano-complex, alcohol-ether-sulfates, and as such, is highly biodegradable.
SPECIFICATIONS
| Color | Amber | Density | 8.6 lb per gallon |
| Pour Point | -20°F | pH | 7.0‒8.0 |
| Flash Point | > 240°F | Charge in solution | Slightly Anionic |
| Specific Gravity | 1.048 | ||
HANDLING & STORAGE
Keep product from freezing. Store at room temperature. Avoid contact with eyes. Avoid prolonged or repeated contact with skin. Do not take internally. Keep container closed when stored.
FIRST AID
Skin and Eyes: In case of contact flush with plenty of water for at least 15 minutes. If irritation develops, call a physician.
PACKAGING / AVAILABILITY
Product is available in 5-gallon pails, 55-gallon drums, or in bulk and in 275-gallon totes.
Super absorbent Mud Solidifier-OM – Bio Base is an eco-friendly, non-polymer-based, slurry solidifier specially designed to solidify a variety of aqueous wastewater and sludge containing hydrocarbons and heavy brine, oilfield and mining waste containing oil, and hydrocarbons.
Advantages
Fast-absorbing, selective microbes digest varieties of wastewater and oilfield sludge containing hydrocarbons and heavy brine and continue to work long after the initial contact with waste matter. Mud Solidifier-OM Bio Base will absorb many times its weight with nominal or negligible increase in volume or weight.
As liquid waste is solidified with Mud Solidifier-OM Bio Base, the solidified waste expands in weight and volume by less than 2%‒3% in most common types of waste matter, depending upon the chemical composition. Compared to any other polymer-type absorbent, Mud Solidifier-OM Bio Base does not double or triple in volume. Minimal volume expansion decreases transportation and landfill disposal cost.
Features
- Non-polymer, non-hazardous.
- Contains over 5 million/CFU of selective microbes per 1oz of product.
- Rapidly solidifies water and oil-based waste slurry.
- Chemically bonds to the liquid and digests hydrocarbon-based waste.
- Minimizes waste volume; typical expansion is less than 2%.
- Passes EPA Test Method 9095 paint filter test. After solidification, many waste streams pass EPA Test Method 1311 for RCRA metals.
- Solidified liquid waste is approved for landfill use.
- Performs well within various pH ranges and with heavy brine concentrations.
- Solidifies waste containing wastewater, hydraulic fluid, hydrocarbons, brine water, and sewage waste containing high BOD and COD including fat, grease, and oil.
- Non-toxic, non-leaching, easy-to-use, eco-friendly dry crystals.
Directions
Mud Solidifier-OM – Bio Base absorbent does not require special preparation for use.
For most effective and efficient use in solidifying bulk waste streams:
- Perform a quick-treatability assessment to determine the optimum dose rate.
- Determine the required quantity of Mud Solidifier-OM – Bio Base to be used from a super sack or 50 pound bag or a container.
- Add the Mud Solidifier-OM – Bio Base to the waste stream and mechanically mix with a shovel, backhoe, or track hoe.
Mud Solidifier-OM – Bio Base (cont.)
General Coverage/Absorption Ratios
| MUD SOLIDIFIER-OM
VOLUME |
WASTE VOLUME (Gal) |
WASTE MATERIAL |
| 2–4 oz | 1 | Waste liquid |
| 1–2 oz | 1 | Thick sludge |
| 1 cup (8 oz) | 16 | Concrete slurry |
| 1 lb (2 cups) | 32 | Concrete slurry |
| 50 lb Bag (1) | 1600 | Concrete slurry |
| ½ cup (4 oz) | 8 | Concentrate slurry |
Note: For more specific application rate, coverage and type of waste solidification treatment methods please contact your distributor for details. Application rates may very base on type of waste and liquid content.
Nano Paraffin Dissolve is a revolutionary product combining several proprietary nano-enhanced-solubilization chemistries. Second generation nanoparticle technology is a revolutionary approach to creating substances from particles engineered at the molecular level. Nano-engineered reliquefaction particles drive the proprietary blend of liquefaction chemistries deep into even the toughest deposits, providing superior dissolvability and reliquefaction capabilities. The toughest deposits and buildups can be dissolved with minimal flow of agitation.
Features and Benefits
- Increases oil and gas production.
- Reduces oil viscosity.
- Reduces under deposit corrosion.
- Speeds line clean-up.
- Reduces pumping fees
- Prevents re-depositing.
- Extends life of equipment.
- Does not require heating.
- Does not require removal prior to refining.
Technical Data
| Appearance | Homogenous, non-viscous liquid |
| Color | Light Red |
| Odor | Solvent like |
| Solubility | 100% |
| pH Neat | NA |
| Specific Gravity | 0.78 |
| Flash Point | 49.4°C |
| Boiling Point | 154.4°C |
Application
The proprietary blend of solubilization nanochemistries allow for a wide range of applications within the oil industry. Check with local distributors for specific feed rates and recommendations.
Hydrocarbon Liquefaction and dissolvability Process
Nano Paraffin Dissolve will reliquefy or remediate petroleum (hydrocarbon)-based sludges, sediments, and solids. These compounds include distillate fuel oils, residual oils, lubricants, and many other products resulting from the distillation of crude oil. As the hydrocarbon chains are reliquefied, viscosity reduces (up to 80% or more) and the API gravity increases (up to 3 times) with Nano Paraffin Dissolve. The oil is not harmed and recovery rates of 85% (of available hydrocarbons) or more are normally achieved. The product does not require removal prior to refining.
Paraffin Reliquefaction
Nano Paraffin Dissolve is an efficient means for dissolving and removing a number of paraffin deposits, whether down well, in flow lines or battery tanks, or any other location. The blend of solubilization chemistries allows for the saturated, unbranched, acyclic hydrocarbons (basis for the paraffin) to be broken down and short-chain hydrocarbons substituted. The Nanoparticles allow penetration into even severely dehydrated paraffin deposits. Once reliquefied, the paraffin will maintain its state, even down to very low temperatures, thus preventing redepositing.
NOTE: Due to many paraffin deposits containing a high percentage of mineral deposits bound within the paraffin complex, Syncacid-300 Plus, blended in or in conjunction with Nano Paraffin Dissolve may be recommended. Your local distributor will be able to advise you with regards to your specific application.
Asphaltene Reliquefaction
As with paraffin, Nana Paraffin Dissolve is an efficient solution for addressing asphaltene deposits, particularly in flow lines or various deposits. Down-hole applications in gas or oil wells are also efficiently addressed. Nano Paraffin Dissolve replaces the short to mid length hydrocarbon chains that have volatilized off during the deposition process. These “replaced” hydrocarbon chains are not non-volatile, thus-preventing redeposit of the asphaltene.
Storage & Handling
Aspiration hazard if swallowed. Inhalation of mist may produce severe irritation of the respiratory tract. DO NOT induce vomiting if swallowed. Safety glasses and gloves, as a minimum, are recommended when handling. Keep container closed when not in use. Keep product away from open flame or excess heat and in a cool and dry place, at room temperature.
Refer to the Nano Paraffin Dissolve Material Safety Data Sheet (MSDS) for other safety and handling information.
Oilfield Scale Inhibitor SI 6000 is a scale and corrosion inhibitor that prevents the formation of carbonate and sulphate scales. SI 6000 is phosphorous free and contains a corrosion-scale inhibitor.
SI 6000 improves oil and gas flow by preventing scaling without causing any change in crude oil characteristics. SI 6000 contains nano-enhancement products that chelate dissolved minerals to prevent scale formation from calcium carbonate and prevent strontium sulphate deposits. It enables scale-free maintainance of surfaces in pipe walls, heat exchangers, and valves, increasing production efficiency and minimizing maintenance, repair. and replacement costs.
Scale Inhibitors prevent further scale buildup on metal or plastic piping and equipment in the oilfield. Some crude oils, with high levels of scale, plug pipelines with only a few weeks of actual service. If scaling in the oilfield is not addressed, the reduced production can actually kill a well. Usually, low levels of scale inhibitors (20 ppm –500 ppm) are continuously injected or batched to prevent or limit scaling of this equipment.
The SI 6000 has been formulated to withstand the rigors of oilfield application and perform equally well across a wide range of temperatures and pressures. SI 6000 can be used to treat water cut well flowlines, process equipment and oil pipe lines.
BENEFITS
- Inhibits the formation of carbonate and sulphate scales.
- Contains a corrosion inhibitor for added value.
- Phosphorus free.
- Environmentally friendly .
- Biodegradable in brine and freshwater chemistry.
- Protects steel and other metal from corrosion.
Technical Data
| Appearance | Pale yellow |
| Odor | Mild |
| Bulk Density, lbs/gal | 8.8 |
| Specific Gravity | 1.05 @ 25°C |
| Flash Point | None |
| Freeze Point | -1°C (30°F) |
| Corrosive | No |
| Solubility in Oil | No |
| Solubility in Water | Complete |
| Active | 100% |
HANDLING
SI-6000 can be stored in closed containers away from direct sunlight at ambient temperature. During handling, direct contact with human body is to be avoided. Safety goggles and gloves are recommended for safe handling. The spillage can be washed with copious amount of water. On ingestion/eye contact with the product, water should be sought immediately.
STORAGE: Keep from freezing. Store between 40°F–120°F (4°C‒50°C).
AVAILABILITY: 55-gallon drums.
SHIPMENT: Freight classification is “Not Regulated Material.” Per DOT, IATA, IMDG.
Packer Fluid-SCI 412 corrosion inhibitor is a multifunctional corrosion, scale and rust inhibitor, and oxygen scavenger in water-soluble formulation possessing strong surface-active antimicrobial properties. It is composed of complex acrylates and quaternary amines.
FEATURES
- Thermally stable.
- Effective in hot wells.
- Excellent brine solubility.
- Mixes easily with packer fluids.
- Completely water soluble.
- Particularly effective in high fluid wells.
- Detergent action.
- Helps prevent under deposit corrosion.
BENEFITS
- Effective at low concentrations, making it extremely cost effective.
- Non-foaming and will not adversely affect drilling fluid properties.
- Multipurpose liquid packer fluid designed specifically for fresh water and brines.
- Multi-functional contains corrosion and rust inhibitors, an oxygen scavenger, and a biocide.
Technical Data
| Specific gravity, 60°F (16°C) | 1.03 |
| Specific Weight, 60°F (16°C) | 8.6 lb/US gal |
| Flash Point | N/A |
| Pour point | -10°F (-25°C) |
| Viscosity
@ 60°F (16°C) @ 30°F (-1°C) @ 0°F (-18°C) |
|
| 40 SUS | |
| 60 SUS | |
| 100 SUS | |
| Solubility (brine) | Soluble |
| Solubility (hydrocarbon) | Insoluble |
MATERIAL COMPATIBILITY
Suitable:
Metals: admiralty brass, aluminum, copper, mild steel, 304 stainless steel, 316 stainless steel.
Plastics: Plexiglas, HD polyethylene, HD polypropylene, PVC .
Elastomers: fiberglass, BUNA N (rubber), neoprene, Teflon, Viton.
Not Suitable: Plastic, Elastomers, Hypalon.
APPLICATION
This chemical is recommended especially for the inhibition of packer fluid corrosion and for the prevention of deposits formed from fluids under static conditions. It has been tested and found to be stable at high temperatures and is soluble in sweet and sour brine water. It is suggested that a 1% solution should be made in the packer fluid based on the volume of the packer fluid. For specific project dosage, contact our technical representative to evaluate your system’s performance, specify the appropriate treatment and equipment, and design a comprehensive application program.
Packer Fluid-SCI 412 (cont.)
STORAGE
Store in sealed, upright containers in a ventilated area at ambient temperatures. Keep container closed if not using.
HANDLING
Observe warning labels on containers. Normal precautions for handling industrial chemicals should be observed. Wear protective goggles or face shield and rubber gloves.
PACKAGING: 5-gallon pails, 55-gallon drums, and 275-gallon plastic totes.
Pipe on Pipe Nano Lube Additive 860 Concentrate – WB is highly-concentrated, water-based Nano-emulsion Lubricant. It is a highly effective pipe lubricant designed for use in freshwater, brines and acids. This product is extremely effective in high brine and inverts and disperses rapidly. The unique Nano-fusion chemistry combination of this product provides excellent pipe-on-pipe lubricity that immediately solves drag, friction, and torque issues or can be used in a prevention program to lessen costly downtime.
Pipe on Pipe Nano Lube Additive 860 Concentrate-WB is a water-soluble lubricant with an extremely high attraction to metal surfaces. The product adheres to metal instead of other surfaces such as solids. This metal affinity permits coil tubing and drill pipe to coat much quicker than standard lubricants, allowing for a more ecofriendly, effective, and efficient lubricating process.
Pipe on Pipe Nano Lube Additive 860 Concentrate-WB was created to reduce the friction that exists between the coil tubing and casing or the drilling assembly and wellbore and casing. The product reduces weight stacking in highly-deviated wellbores and allows the transfer of more weight to the bit. This increases ROP, decreases torque and drag, and minimizes problems tripping in and out of the hole in drilling, workover, and coiled-tubing operations.
ADVANTAGES AND BENEFITS
- Reduces torque and drag associated with coiled tubing drilling, logging, workover, or completion applications.
- Reduces the coefficient of friction between the work string and wellbore.
- Compatible with anionic and cationic polymers and lubricants.
- Non-aromatic components will not harm mud motors, MWD, or LWD tools.
- Environmentally-friendly, non-regulated material.
PHYSICAL PROPERTIES
| Form | Liquid |
| Color | Opaque to milky |
| Density | 8.6 pounds per gallon |
| Thermally stable | @ 400°F (204.4°C) |
Directions
MIXING PROCEDURES
Pipe on Pipe Nano Lube Additive 860 Concentrate – WB lubricant dose rate may vary with temperature and fluid characteristics. Also viscosity may vary based on water pH and salinity.
Typical dosage ranges from 32‒36 fl oz per 1000 gallons of water.
This product may be batch mixed or added directly to the stream. Mix uniformly until solution becomes homogenized prior to use.
Pipe on Pipe Nano Lube Additive Concentrate 860 WB (cont.)
HANDLING and STORAGE
Keep product from freezing.
Store at room temperature.
Avoid contact with eyes.
Avoid prolonged or repeated contact with skin.
Do not take internally.
Keep container closed when stored.
Pipe on Pipe Nano Lube Additive 1126 Concentrate – OB (Organic-Based) is highly-concentrated, organic, oil-based Nano-Enhanced Lubricant. It is a highly-effective pipe lubricant designed for use in freshwater, brines, and acids. This product is extremely effective in high brine and inverts and disperses rapidly. The unique Nano-fusion chemistry combination of this product provides excellent pipe-on-pipe lubricty that solves drag, friction, and torque issues immediately or can be used in a preventative program to lessen costly downtime. This product is specially designed to use where organic oil-based products are recommended for friction reduction.
Pipe on Pipe Nano Lube Additive 1126 Concentrate – OB is an oil-soluble lubricant with an extremely high attraction to metal surfaces. The positive ionic charge helps this product adhere to metal instead of other surfaces such as solids. This metal affinity permits coiled tubing and drill pipe to coat much quicker than standard hydrocarbon-based lubricants, allowing for a more eco-friendly, effective, and efficient lubricating process.
Pipe on Pipe Nano Lube Additive 1126 Concentrate – OB was created to reduce the friction that exists between the coiled tubing and casing or drilling assembly and wellbore and casing. The product reduces weight stacking in highly deviated wellbores and allows the transfer of more weight to the bit. This increases ROP, decreases torque and drag, and minimizes problems tripping in and out of the hole in drilling, workover, and coiled tubing operations.
ADVANTAGES AND BENEFITS
- Reduces torque and drag associated with coiled tubing drilling, logging, workover, or completion applications.
- Reduces the coefficient of friction between the work string and wellbore.
- Compatible with anionic and cationic polymers and lubricants.
- Non-aromatic components will not harm mud motors, MWD, or LWD tools.
- Environmentally-friendly, non-regulated material.
PHYSICAL PROPERTIES
| Form | Liquid |
| Color | Light Amber |
| Density | 7.5 pounds per gallon |
| Thermally stable | @ 500°F (260°C) |
Directions
MIXING PROCEDURES
Pipe on Pipe Nano Lube Additive 1126 Concentrate – OB lubricant dose rate may vary with temperature and fluid characteristics. Viscosity may also vary based upon type of oil used for dilution.
Typical application rates ranges from 5‒10 gal per 1000 gallons of mineral oil.
This product may be batch mixed or added directly to the stream. Mix uniformly until solution becomes homogenized prior to use.
Consult your dealer or distributor for specific application rates. Based on the condition of the well and the salinity of the water.
STORAGE
Keep product from freezing.
Store at room temperature.
Keep container closed when stored.
HANDLING
Avoid contact with eyes.
Avoid prolonged or repeated contact with skin.
Do not take internally.
FIRST AID
Skin and Eyes: In case of contact, flush with plenty of water for at least 15 minutes. If irritation develops, call a physician.
PACKAGING
Product is available in 5-gallon pails, 55-gallon steel lined drums or in bulk and in 275-gallon totes.
LIMITED WARRANTY
EST has no control over the storage handling or use of this product, thus the guarantee is limited to the purchase price of the detective material only. All information and direction as contained in this bulletin and on the product label are intended to be used by a person having experience and practical application skills. No other guarantees/warranties are expressed or implied.
Poly Gel-1500 Poly is a high-viscosity synthetic polymer that is particularly effective as a friction reducer in thickening hydrochloric acid, brines, or fresh water. It has excellent high-temperature stability and provides greater efficiency by producing more viscosity with each pound of polymer. Poly Gel-1500 is a highly-concentrated, semi-liquid-polymeric Nano-particle suspension that provides quick hydration in fresh and brine water.
BENEFITS AND ADVANTAGES
-
HANDLING
This suspension flows readily, even in severe cold temperature and frigid conditions. The pour point of the suspension is below -10°F. This allows the product to be easily poured out of a container, or metered through a positive displacement pumping method.
-
RAPID HYDRATION
Complete viscosity will develop in 2% KCL within one minute at 75°F. Also this product can be used with continuous-mixing applications, such as slick water fracturing treatments under adverse field-mixing conditions. Poly Gel-1500 can be applied directly to calcium chloride brine with rapid viscosity development in a very short time.
-
SUPERIOR, LONG-TERM SUSPENSION STABILITY
This Nano-fusion formulation utilizes a base fluid system that has been successfully used for other polymer suspensions for well over a decade. Poly Gel-1500 has proven to be stable, with no indication of particle settling or phase separation for more than a year under normal storage conditions.
APPLICATIONS
Designed to:
- Improve results by live-acid penetration.
- As a thickener for slick water fracturing.
- As a friction reducer for acids and brines.
- As a thickener for fresh water or brines in workover or completion operations.
- As a thickener or aqueous lubricant for use in pipeline, fiber optics, and related drilling and placements.
POLYMER CLEANUP
Use ammonium persulfate solution to clean effected areas including near wellbore areas
Pipe on Pipe Nano Lube Additive 1126 Concentrate – OB (Organic-Based) is highly-concentrated, organic, oil-based Nano-Enhanced Lubricant. It is a highly-effective pipe lubricant designed for use in freshwater, brines, and acids. This product is extremely effective in high brine and inverts and disperses rapidly. The unique Nano-fusion chemistry combination of this product provides excellent pipe-on-pipe lubricty that solves drag, friction, and torque issues immediately or can be used in a preventative program to lessen costly downtime. This product is specially designed to use where organic oil-based products are recommended for friction reduction.
Pipe on Pipe Nano Lube Additive 1126 Concentrate – OB is an oil-soluble lubricant with an extremely high attraction to metal surfaces. The positive ionic charge helps this product adhere to metal instead of other surfaces such as solids. This metal affinity permits coiled tubing and drill pipe to coat much quicker than standard hydrocarbon-based lubricants, allowing for a more eco-friendly, effective, and efficient lubricating process.
Pipe on Pipe Nano Lube Additive 1126 Concentrate – OB was created to reduce the friction that exists between the coiled tubing and casing or drilling assembly and wellbore and casing. The product reduces weight stacking in highly deviated wellbores and allows the transfer of more weight to the bit. This increases ROP, decreases torque and drag, and minimizes problems tripping in and out of the hole in drilling, workover, and coiled tubing operations.
ADVANTAGES AND BENEFITS
- Reduces torque and drag associated with coiled tubing drilling, logging, workover, or completion applications.
- Reduces the coefficient of friction between the work string and wellbore.
- Compatible with anionic and cationic polymers and lubricants.
- Non-aromatic components will not harm mud motors, MWD, or LWD tools.
- Environmentally-friendly, non-regulated material.
PHYSICAL PROPERTIES
| Form | Liquid |
| Color | Light Amber |
| Density | 7.5 pounds per gallon |
| Thermally stable | @ 500°F (260°C) |
Directions
MIXING PROCEDURES
Pipe on Pipe Nano Lube Additive 1126 Concentrate – OB lubricant dose rate may vary with temperature and fluid characteristics. Viscosity may also vary based upon type of oil used for dilution.
Typical application rates ranges from 5‒10 gal per 1000 gallons of mineral oil.
This product may be batch mixed or added directly to the stream. Mix uniformly until solution becomes homogenized prior to use.
Consult your dealer or distributor for specific application rates. Based on the condition of the well and the salinity of the water.
STORAGE
Keep product from freezing.
Store at room temperature.
Keep container closed when stored.
HANDLING
Avoid contact with eyes.
Avoid prolonged or repeated contact with skin.
Do not take internally.
FIRST AID
Skin and Eyes: In case of contact, flush with plenty of water for at least 15 minutes. If irritation develops, call a physician.
PACKAGING
Product is available in 5-gallon pails, 55-gallon steel lined drums or in bulk and in 275-gallon totes.
LIMITED WARRANTY
EST has no control over the storage handling or use of this product, thus the guarantee is limited to the purchase price of the detective material only. All information and direction as contained in this bulletin and on the product label are intended to be used by a person having experience and practical application skills. No other guarantees/warranties are expressed or implied.
SEBS Bacterial Systems is highly dedicated to the development and manufacture of high-quality, environmentally-friendly and responsible biotechnological products. Utilizing natural resources, SEBS systems incorporate specific technology to solve numerous industrial, commercial, and institutional problems which result from waste.
SEBS Frac Flow Backwater Cleanup lowers brine concentrations from the flowback water to reuse in hydraulic fracturing.
Frac water complications
Frac and flow backwater contain heavy brine along with other dissolved minerals and various additives. This contaminated water is not safe to use anywhere for anything.
SHALE DEPOSITS IN FRAC WATER MAKE-UP
1‒10 million gallons of fracture (frac) water mixed with various additives is required to complete fracture within each horizontal deep well. Once used, this now-contaminated water must be removed from the well and generally 10%‒40% is recovered, commonly referred to as “flow back” water. Typically, flow backwater contains high dissolved solids with varying levels of various other constituents such as barium and strontium.
METALS AND ACID-PRODUCING MINERALS
Marcellus shales are known in some regions to contain acid-producing minerals such as pyrite and sulfides. Based on region, acid-forming minerals vary due to particular shale formations.
CONDITIONS
Due to the high-dissolved solids content and presence of various other constituents, disposal of flow backwater is becoming very difficult and costly. Obtaining the needed water to makeup frac water with subsequent disposal of the flow backwater presents a significant problem for gas production firms. In many areas, the amount of suitable water needed for formulation of frac water is just not available.
The best solution to this combined water supply and wastewater-disposal problem is to simply treat and recycle the flow backwater with our eco-friendly SEBS Microbial solution over and over again to lower brine and various mineral concentrations. This process helps clarify water and remove unwanted solids.
CONTAMINATED WATER CLEAN UP CAN BE ACHIEVED BY A TWO-STEP PROCESS
- By using SEBS Bacterial system, contaminants saucy as solids, sludge, heavy metals, hydrocarbons, and any dissolved inorganic waste may be removed from contaminated water.
- By using flocculation treatment, contaminated solids settle from water to the bottom of ponds or tanks, leaving clean, clear water on top before discharging. (See flocculent product data for details.)
SEBS RESULTS
- Reduced Odor by aerobic digestion.
- Reduced organic solids down more than 80%.
- Reduced ammonia BODS/TSS.
- Digested and liquefied waste.
- Lowered brine concentration in frac and flow backwater.
- Reduced concentration of acid-forming minerals.
- Remediated spills within secondary containment areas insure compliance with groundwater management plans.
- Contamination treated on-site rather than relocating the problem, reducing liability issues.
- Competitive project cost―generally thousands of dollars less than traditional “dig and haul” methods.
SEBS BENEFITS
| Nontoxic. | Non-corrosive. | Non-polluting. |
APPLICATION
Initial Treatment
- For each barrel of frac or flow backwater (44‒50 gal), use 50‒70 fl oz of SEBS. After treatment with SEBS, let solution stand for minimum 24 hours before reusing or discharging treated water.
- Follow up with flocculent applications (see product data for proper dosage). This treatment will help settle out heavy mineral particles and leftover inorganic residues.
Note: Pretesting of water should be completed to note the amount of brine water concentration in order to determine whether or not the SEBS dosage amount needs to be adjusted.
Treated frac water can be transferred into separate holding tanks for secondary SEBS treatment. If needed, repeat steps 1 and 2.
Holding Tanks: Use 8‒10 gallon of SEBS for every 1000 gallons of wastewater; follow up with flocculent application. (See product data for proper dosage).
Note: Check water sample after each application. Follow steps one and two for better results until desired level is reached for proper discharge.
DO NOT AERATE after flocculent treatment; let set 24 hours before discharging water.
CONDITIONS OF SALE
Always follow all label directions. The manufacturer cannot control weather conditions, methods of application nor the condition of the area at time of application. Buyer assumes all risks of use, storage or handling of this product when used in a manner inconsistent with label directions. EST Inc. will not be responsible for any injury, loss, or damage if product is used or stored in any manner not in compliance with label/tech sheet directions or if precautions are not observed.
STORAGE AND HANDLING
Note: Follow directions carefully. Always consult your dealer or supplier for timing, methods and to customize application, depending on contaminations.
Wear rubber gloves and eye protection. Avoid contact with open wounds or sores, harmful if swallowed, avoid any direct contact with the skin and eyes; may cause irritation.
Keep container closed when not in use. Store out of direct sunlight. Keep from Freezing. Avoid temperatures above 90 °F, or below 40 °F.
Syncacid is a user-friendly synthetic acid chemistry that replaces muriatic and hydrochloric acid, making the acid easier to use. This product offers the advantages of powerful acids while significantly improving the overall health and safety risk profile.
Syncacid reduces noxious fumes by up to 90%. It will not burn intact skin or proteins of the body. By reducing the risk of acid burns and toxic fumes, it allows for easier handling, transportation, and storage. Due to reduced fuming, there is less corrosion to metal structures, including storage areas, pool equipment, and filtration systems. Syncacid is as effective upon oxides of metal when compared with standard muriatic acid.
ADVANTAGES
- Significantly reduces toxic and corrosive fumes.
- Won’t burn intact skin.
- Syncacid is as effective upon oxides of metal when compared to standard muriatic acid.
- Cleans, clarifies, and etches comparable to full strength 20° Baume, 31.45% muriatic acid.
- Reduced fuming inhibitor with anti-corrosion buffer minimizes corrosion to metal structures including storage areas, pool equipment, and filtration systems.
- Safer alternative to hydrochloric acid.
APPLICATION
Pool and Spa: Adjusts pool and spa water chemistry. As an acid wash, removes rust, scale, mineral deposits, and stains from glass, tile, and porcelain surfaces in showers, locker rooms, and restrooms.
Concrete and Masonry: Cleans exterior brick and concrete surfaces, stone and grout, and removes efflorescence. Etches concrete in preparation for painting. Removes excess mortar from brick. Brightens walkways, patios, and driveways.
Food/Beverage: Used in acid baths/washes to clean lines, vats, tanks, etc.
General Maintenance: Removes calcium and other mineral stains from water heaters, cooling towers, tubs, toilets, and showers. Removes rust, mildew stains, scale, and mineral build-up. Excellent as an acid wash and effective filter cleaner. Etches metal surfaces in preparation for painting. Removes mineral buildup from water fountains. Syncacid minimizes acid hazard in various industries.
Directions
General cleaning and etching
Add 1 part Syncacid to 4 parts water. Certain applications require a weaker solution. Always check on an inconspicuous area. For pH adjustment, consult a local pool and spa professional for proper dosage. Use at the same rate as standard muriatic acid. Use caution when using on aluminum- or metal-plated products as damage may occur.
Synacid-300 is the world’s only Nano-enhanced synthetic acid with cleaning properties that outperform traditional acids such as muriatic acid and phosphoric acid without any of the harmful effects. Synacid is non-D.O.T. regulated, non-fuming, 100% biodegradable, and OSHA- and EPA-compliant. Synacid-300 is also a safe alternative to acids and is listed at a triple zero Hazardous Material Index.
Synacid-300 Nano-Enhanced is designed to penetrate the toughest composites of mineral build-up and will dissolve and loosen the heaviest mineral or calcium deposit from metal pipes without harming or rusting the pipe.
PHYSICAL PROPERTIES
| Appearance | Light Yellow Color |
| Weight/Gallon | 9.33 ± 0.1 |
| pH | <1 |
| Solubility In Water | 100% |
| Flash Point | None |
| Boiling Point | 214°F |
Directions
Synacid-300 can be diluted with water depending on the amount mineral build-up.
| Light Deposit | Dilute 5:1 with water |
| Medium Deposit | Dilute 3:1 with water |
| Heavy Deposit | Dilute 1:1 with water |
| Excessive Deposit | Use undiluted |
STORAGE and HANDLING
Synacid-300 Nano Enhanced has a storage life of one year. Keep container closed when not in use. As with all chemical products and materials, take care where stored.
Safety glasses are suggested for use when handling this product.
SYNTHETIC ACID REPLACEMENT: DRIVEN BY NANO
DESIGNED FOR the OIL FIELD INDUSTRY
Syncacid 300 Plus breaks down calcium, lime, rust, and other deposits which, until now, required the use of harsh acids. Syncacid 300 Plus is combined with detergents and surfactants to eliminate secondary steps to more effectively and economically penetrate deposits. It can be used to descale lines, pipes, cooling towers, heating coils, boilers, and dehydrators and any other system that builds up calcium deposits. Syncacid 300 Plus potency combined with its safety profile earns it the U.S. Navy and Coast Guard approval.
This formulation rises to the next level by adding scientifically-engineered Nano particles boosting formula effectiveness— in essence a formula on steroids. Nano powers this formula. A Nano particle is one billionth of meter and helps drive Syncacid 300 Plus deeper into the scale or deposit formation.
Syncacid 300 Plus instantly neutralizes with fresh water. It is biodegradable per OECD 301 D and removes no trace metals from the system, making it legal to dispose of directly into a sanitary system. Syncacid 300 Plus is 100% biodegradable, non-corrosive, non-regulated by the D.O.T. and it is non-mutagenic to marine life.
FEATURES AND BENEFITS
- Safe on piping and pumping equipment.
- Non-toxic; secondary containment not required.
- No disposal restrictions.
- Non-mutagenic.
- Neutralizes easily with water.
- 100% acid-free.
- 100% biodegradable
Technical data
| TYPICAL PHYSICAL PROPERTIES | DISSOLVING PROPERTIES* | ||
| Appearance and Color | Light yellow to colorless liquid | Acid | % Dissolved |
| Cold Stability | -8°F | HCI | 8.9% |
| Odor | Mild soapy odor | Syncacid 300 Plus | 8.9% |
| Solubility | 100% | Urea HCI | 7.2% |
| pH Neat | <1 | Glycolic | 0.2% |
| Specific Gravity | 1.10 | ||
| Flash Point | None | ||
| Boiling Point | 210°F | ||
*Calcium Carbonate Dissolving Properties of Acids with 3 minute Exposure.
Testing Conditions: 200 Grams of 5% active solution, 1 Calcium Carbonate Cube: 3 Minutes at 70°F
TOXICITY
Toxicity Limits: Test Procedure OECD 202, 48 hr., LC50 and LD 50 were proven to be NON-TOXIC
Mutagenicity Limits: OECD Guidelines Sec.471 Chemicals: NOT TO BE MUTAGENIC.
Dermal Irritation & Corrosion Test:
A modified Draize method was used as described in OECD Guidelines for the Testing of Chemicals Sec. 404 and complies with the requirements of OECD Principles of GLP, Annex revised as of July 1992
Primary Irritation Score: 0.09+/-0.2 and is classified as a “Very Mild Skin Irritant.”
BIODEGRADATION and AQUATIC SAFETY
Test Procedure: Reactor Digestion method for waste water and sea water. Hach Reactor Digestion Method is a semi-micro adaptation of the standard methods.
Test Results: 100% biodegradable. CO = Low Detectable Limits. BOD = No Detectable Limits
Ecological Study: 96 hr. LC50: Flathead Minnow > 600 mg/l= Non Toxic: 96 hr LC50: Rainbow Trout > 20mg/l= Non Toxic
METAL STUDIES
Test Procedure: Dept. of Transportation (DOT) Test Protocols as per Section 173.1 54 Exceptions for Class 8 (corrosive materials). Material being tested must be proven to be non-constructive or not to cause irreversible alterations in human skin tissue. Testing was conducted on an albino rabbit.
Conclusion: Syncacid 300 Plus was proven to be NON-DESTRUCTIVE on human skin tissue.
METAL TEST LIMITS
D.O.T. Classifies a material to be corrosive if it has a corrosion rate that exceeds 6.25 mmpy on SAE C1 020 carbon steel or 7075-Y6 Aluminum.
Results: SAE 1020 carbon steel = 0.23 mmpy
Conclusion: Syncacid 300 Plus is NON-CORROSIVE.
CLASSIFICATIONS and APPROVALS
D.O.T., TDG, IMO, IATA, IMDG, SARA 313 311/312, California Prop 65 NON-Regulated
USDA Authorization: A1, A2, A3, A4, A7, A8, C2, G6 & G7
FDA- Approved as Safe (GRAS): (CGMP) CFR 184,1923
Navsea, US COAST GUARD, NOAA, HRSD for direct disposal into VA Sewer System
SYNCOS is a synthetic, non-caustic cleaner that will cleanse without the dangerous properties of sodium hydroxide, potassium hydroxide, and other caustic cleaners. SYNCOS Non-Caustic Cleaner is non-D.O.T. regulated, 100 % biodegradable, and OSHA and EPA compliant. SYNCOS Non-Caustic Cleaner is listed at a triple-zero Hazardous Material Index.
SYNCOS cleaner works as a high pH cleaner in cold temperature without the risk of burns from traditional caustic cleaners and will eliminate the damage to equipment that occurs with caustic cleaners.
APPLICATION
SYNCOS Non-Caustic Cleaner can be used full strength or diluted with water depending on the requirements for cleaning.
PHYSICAL PROPERTIES
| Appearance | Clear Colorless Liquid |
| Weight/Gallon | 10.41 ± 0.1 |
| Solubility | 100% in water |
| Flash Point | None |
| Boiling Point | 264°F |